HP pavilion dm4-1265dx slow to reconnect to the wireless network after Awaking of the fashion watch

Similar Questions

• Lose the controller PCI simple communication (pavilion dm4-1265dx) driver

  Dear all,

  My laptop lost the PCI simple communications controller driver.

  I need to get the driver for my hp pavilion dm4-1265dx.

  Here are the hardware ID.

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146A103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_146A103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  I tried to find the driver on the Net, but I can't find the driver.

  I sincerely hope that everyone can provide the URL or the installation of the pilot program.

  Thanks for everyone's help.

  Hello

  Download and install the Intel MEI Driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50858.exe

  Kind regards

  DP - K

• HP Pavilion dm4-1265dx: does not update HP Pavilion dm4-1265dx

  Pavilion dm4-1265dx has never successfully updated its software. I run the recommended updates that are included in my automatic Windows updates, but not the HP updates have already updated, it always says, "failed." I tried to update directly from the HP site and have experienced the same results. Any suggestions?

  Hello

  Thanks for posting your concern for the Forums for Support and sorry about the problem you are having. To help you the best I would need the failure error code. I will quote the steps to get the code of failure below.

  • Go to the Control Panel
  • Make sure that in the upper right corner of the ' view by ' is selected for both small or large icons instead of the category.
  • Go to "Windows update".
  • You will find on the left in the list 'view update history'.
  • In the list, the status of the various updates would b mentioned in the second column.
  • There will be updates failed, you need to right-click on it and click 'see details'.
  • On the next window, there will be "Error Details" section with code 8xxxxxxxx.

   

  These are the codes that are required. Please write us back with these codes. And also for resolved errors you can try to install the updates individually.

  • You have to go back to the control panel > windows updates.
  • In the list on the left choose "check for updates".
  • Once the updates is enabled, it will be little important and a few optional updates.
  • First click on the important updates and a list would be populated, choose the updates one by one.
  • After an update is installed and the le redemarrage reboot the PC, choose the second update and continue in the same manner.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• Pavilion dm4-1006tu: 5 GHz in Broadcom 802.11n network adapter support

  Hello

  Broadcom 802.11n network adapter has dual band support? (2.4 GHz and 5 GHz)

  Command prompt provides these details:

  C:\ >netsh wlan show drivers

  Name of the interface: Wi - Fi

  Driver: Broadcom 802.11n Network adapt
  Version: 6.30.223.256
  INF file: C:\Windows\INF\netbc64.inf
  
  C:\Windows\system32\DRIVERS\BCMWL63a.sys
  C:\Windows\system32\DRIVERS\vwifibus.sys
  Type: Wi - Fi Native Driver
  Radio types supported: 802.11n 802. 11 a 802.11 g, 802. 11 b

  Thank you

  @Annshul,

  Hello and thanks for the display on the HP support forums.  Here is a link to your laptops manuals.  All specifications can be found on this page.

  HP Pavilion dm4-1006tu Entertainment Notebook PC - manual

  You will find all the answers to your specifications of systems.

  Thanks again for posting and have a great day.

• Pavilion dm4-black screen after opening the cover of the fashion watch

  Pavilion dm4-3000tx

  Windows 7 (64-bit)

  When I close the lid of the laptop and re - open the screen remains black. the sounds keep playing and if a video is palyed before closing the lid, he also plays with the play/pause button, but there is no graphics on the screen, only a black screen while all runs in the background. I have to restart the machine with the power button then.

  action dafault on the cover is the sleep and re - open the cover and press a button he wakes up, but the screen is still black. problem when I change the dafault action: do nothing

  Hi zineb. I understand that your computer is well problems wake up sleep mode. I found a thread from Microsoft that contains a good amount of troubleshooting for this issue: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blankblack-screen-on-wake-up-from-sleep/6fdca378-6279-486e-8e7f-6e90a3f9d42f

  Please inform me of your results when the diagnosis is complete. I'm only here to help!

  Mario

• HP Pavilion dm4-3055dx Entertainment PC freezes on the right side of the screen after logging in. Help, please.

  Hello people,

  I have a very frustrating problem with my HP Pavilion dm4 - 3.55dx Entertainment PC running Windows 7. I bought it 3 months back and it worked very well at the speed I expected to until yesterday when I restarted.

  I was watching videos on youtube when my google chrome crashed. And then every time I restarted chrome, it would start but will not let me type. As a result, I started using Firefox and that worked very well. But I had all my bookmarks and stuff on Firefox so I decided to restart my laptop, hoping that would solve the problem of chrome.

  When it restarted, everything went well, I connected and my office has appeared, but it froze. I couldn't do anything and he would not recognize the clicks. Nothing seemed to work so I used the power button on for close and tried again. The same problem. Then I opened a session in Safe Mode and checked the event viewer and there was an error on the Microsoft .NET Framework v4 period.

  I also had DCOM 1084 errors but I'm assuming this is because I was in safe mode in time. The other persistent mistake was my WLAN won't start not in Normal mode (I can access the internet fine with safe mode). I read on some forums that a virus could be the problem so I uninstalled Avast, but which did not help. Nothing seemed to help, so I restored my system to July 31. It is while I had the latest update of Windows. Yet once again, the problem still exists.

  This morning the only mistake in the case where the viewer was the Search Service Windows does not but the laptop still frozen every time so I disabled the search service, but that did not help either. The system still freezes whenever I starts in Normal mode, but it records all errors in the system event viewer folder. There is one in the application log on the description for event ID 1003 from source that ISCT Agent cannot be found.

  I don't know what the problem with my laptop. Everything worked as it should until reboot. Any help would be much appreciated.

  Thank you!

  Ok. The HARD drive is faulty. Please use your warranty and get in touch with HP. They will send you for free the new HARD drive.

  How to do? Click on the link below and choose your country:
  Contact HP worldwide

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• laptop HP pavilion g7 running windows 7 is more bed wireless network adapter

  My hp pavilion g7 as lx503av bed is no longer the wireless network card. instead of the icon being displayed wireless, I have only the icon of LAN. When I checked the Device Manager, the wireless network card was not shown. Once I scanned for hardware puts a couple of times, the adapter that presented themselves and the LAN icon changed the wireless icon. When I clicked it, it says "no connection is available" until my router is turned on and just next to me. In the meantime my wireless switch is turned off and remained so no matter how many times I try to turn it on. I tried reinstalling the drivers, nothing works. What continues?

  Contact HP for warranty repair.

• Pavilion dm1 that suddenly will not find my wireless network.

  Hello

  I have a Pavilion dm1 notebook, running Windows 7 32 bit which is suddenly unable to connect to the wireless network. I know that wireless works very well as other devices are plugged on, and it works very well for the last few months. I connected the netbook directly on the modem with the cable.

  The wireless switch is on - watch the blue light on the wireless key. I tried to turn the computer and the internet router / wireless market of several times. When I click on the network key in the toolbar, it does not give me the ability to scan for WiFi networks, and when I try and set up a new network of the only option it gives me is using DSL/cable broadband.

  I have tried many 'solutions' to try to get a chance to see a wireless network but no luck.

  Any help would be appreciated!

  Thank you.

  Completed by reinstalling the latest drivers and all of a sudden 10 wireless networks appeared. Did not work the first time I tried it but good! Second time lucky.

• HHD on pavilion dm4-1265dx failed, replacement?

  It is what is inside at the moment: http://www.amazon.com/dp/B0039Z5IUU/ref=asc_df_B0039Z5IUU2091099?smid=A33Y0YQUZ2NYD5&tag=cnet-pc-20&...

  want to see if I can replace it without pain with: http://www.amazon.com/Seagate-Momentus-Internal-Notebook-ST9750420AS/dp/B004MME0N0/ref=sr_1_3?ie=UTF...

  If not, suggestions are appreciated. Thank you!!

  Also, is it possible to download a disk image of windows 7 64-bit recovery for this pc, rather than order the CD?

  Hello

  The HARD disk that you propose is fine and you can use the following workaround to create an installation disc - you create the installation disk must be the same version of Windows that originally came with your laptop.

  Before you try the following, make sure that you can always read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

  Create an installation disk yourself using another PC - just download the good Disk Image from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need can be found here.

  Kind regards

  DP - K

• This disc hard solid state will be compatible with the HP Pavilion dm4-1265dx

  My drive hard stock is made for so I thought I'd take a bad situation and it becomes an opportunity to upgrade. I want to replace my hard drive with a 750 GB or 1 to SSD or hybrid, but having a lot of trouble to understand that it will be compatible.

  This hard drive is compatible with my laptop, is it still good?

  http://www.Amazon.com/Seagate-solid-hybrid-2-5-inch-ST1000LM014/DP/B00B99JUBQ/ref=dp_ob_title_ce

  or can anyone recommend one for me that will do the trick, of course, I try to keep the cost is low.

  Thank you very much for the help,

  Hello

  I think that I have answered this message a few days ago also. Anyway. 750 GB or 1 TB is great for your machine.

  Kind regards.

• Pavilion DM4-1265dx does not start after the restoration, the new hard drive

  Hello:

  I have a laptop of clients that a hard drive has been giving an iminent failure message.  I was able to create a disc of recovery and replaced the original HD (640 GB) with a 500 GB HD.  I can't do the factory recovery because the hard drive is smaller, but it allows me to perform a recovery of the operating system.  The question that I am running is after he read the DVD 6, the system wants to re-start and then it crashes just in the HP splash screen.  If I turn it works, I get could not find a boot device.

  How can I get around that, before the establishment with a win 7 CD?  Is this process of recovery to a waste of time, as I did on the previous model HP computers and it has always worked.

  Thanks in advance for any ideas.

  Mike

  Hi cloud:

  To be more precise, of memory, there are two options, reset and factory restore.  Factory restore won't do it because the disk is slightly smaller.  Factory reset will allow me to put the recovery disk hard, but when he re - start, it crashes just in the hp splash screen.  When I do the three fingers of salvation, then I get cannot find the boot device.  I made the internal test and everything passes with flying colors.

  I finished download an iso image and install from scratch, but I can tell you that it is the system more screwed up that I never ran into 30 years of working with these toys.  I tired to do a repair, but that creates just again the same symptom.

  I have an Acer Tablet that I've been able to use the computers acer recovery disk that was not intended (but had the same version of the operating system) and at least was able to get the operating system and software and finished to the top with the right drivers, size of the hard drive has been ignored in their case.

  Thanks for help you, it is appreciated, but I doubt I can recommend HP to one of my clients in the future based on what I've run here.  This is inconsistent with a solution of recovery as far as I'm concerned, that MS requires manufacturers.  Lets get real, hardware fails for various reasons, and you may not necessarily the same size hard drives with the rate of change occurring in the industry.  Personally, I prefer a game of installation for the operating system and drivers disks.  Dell is one of the only ones I know who did this, and as much as their material is so so, they do at least that right of the party.

  Once again thank you.

  Mike

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• Pavilion dm4: replacement failure of hard drive, the recovery disks does not

  A few moments ago, I started getting a message that my hard drive was not so I purachased a new hard drive and also decided to upgrade the ram. When reinstall drive serves screen says its loading files, then after the progress bar fillsthe computer screen is empty, the hp logo comes on the screen, while she just repeats what was just described. Don't know how to do this, pls help if possible.

  troupe20

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on problems to do a restore by using the disks and wanted to help.

  I know this may sound weird, but at the time of Win7, I would have problems installation or upgrade of PC, if there is too much memory system.  So, what I would say, it's to put the old memory and see if that makes a difference.  I know it shouldn't, but it could.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Pavilion dm4: Windows 10 upgrade fails with the message error "we couldn't update the system reserved partition."

  Both HP and Microsoft indicate my laptop was ready for the upgrade to Windows 10, but when I tried to do the upgrade there not - several times - with the error message of Microsoft that "we could not update the system reserved partition."

  What should do?

  Other threads of error indicate the system reserved partition must be larger.  This partition is usually small.  Try making at least 400 MB instead of the 100 MB to 250 MB it is probably now.