Have we not available under linux admintool

Similar Questions

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• Maximum simultaneous tasks available under Linux.

  I used the converter for a few weeks now.  I would like to be able to set up a queue of tasks to have the converter to start now.  However, I'm unable to change the maximum number of virtual guests on a linux vmware converter standalone installation.

  When the demon of converter is linux on a machine, I connect via another machine with the customer installed linux or a windows with the client box is installed.  When I select the Administration, simultaneous tasks Maximum is not available.  The same result occurs when I connect from the client linux for itself (localhost).  However when I connect to the converter of windows server, the "Maximum simultaneous tasks" option is available.

  Does anyone know how to set this option for vmware converter for linux server?  I tried editing /etc/vmware-converter/converter-agent.xml and /etc/vmware-converter/converter-server.xml and replace the parameter of vmacore - & gt; threadPool - & gt; TaskMax 40-to-1.  The result being that the client could not connect or demon is deceased early solange, respectively.

  Go to a command line, and then run the following as root.  Root is the only one who has permissions to modify the file that contains the number of concurrent tasks.

  /usr/lib/VMware-vCenter-converter-standalone/bin/VMware-Converter-client

  You can then change the number of concurrent tasks.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Satellite L50-B-166: Webcam + microphone does not work under Linux

  Hello

  I'm under Linux Slackware 14.1 with kernel 4.11 on a Satellite L50-B-166.

  Webcam and microphone are not detected by the system, and I can't find the firmware and the module for them.

  Can someone help me?

  Hello

  I get the Webcam work properly in Fedora 22 core 4.0.6 (Incidentally, kernel 4.11 does not yet exist, so what kernel do you use )
  I suggest therefore that you check the software for the Webcam settings is not simply disabled:

  F2 at the STATION
  Go to advanced > system configuration
  Make sure the Webcam is turned on.

  Tom BR

• printf method does not work under Linux?

  Hi, guys
  
  I created a simple java program that uses the printf method to print the results to stdout.
  I found it would not work correctly under Linux (Debian) as it does on Windows. Does anyone know what the problem is and how to fix it?
  
  REF:
  [Screenshot of running on Debian | http://kawamura.blog.enjoy.jp/photos/tmp/screenshotjavadebian_scorechecker_ver10.png]
  
  [Screenshot running on Windows | http://kawamura.blog.enjoy.jp/photos/tmp/scorecheckerwin.jpg]
  
  Best regards
  HappyJay

  You use "gij" and any resemblance between it that a Java tends to be purely accidental. You use openjdk or Oracle's Linux JDK.

• Navigate in the Mini Bridge is not available under the file Menu in Photoshop CC

  Recently installed CC Bridge and Photoshop CC in the Windows 7 environment. "Browse in Mini Bridge" option is not available in the file menu. I reinstalled bridge CC, rebooted, yatta yatta, but no option of Mini Bridge. Any ideas how to make so that it can install/come?

  Thank you!

  Kent

  Mini Bridge is no longer available, then he will never run again. All Flash-based extension signs were removed from Photoshop, and Mini Bridge is one of them. More info here:

  Photoshop: Spring cleaning | Mini Bridge

• Satellite L300-1AQ - Fan switches do not properly under Linux

  For L300-1AQ, the CPU fan is controlled by the BIOS. When you start the Linux machine against the cold, the fan runs at least as it should. But then nothing happens until the critical temperature is reached. At this point, the CPU fan going at maximum speed and stays there even when the air coming out is still cold. So the only way to make the rotation of the fan down once again is to restart... The startup parameter "acpi_osi =' has no effect."

  This isn't a hardware problem, because the fan works well under Windows: slow and steady rotation up in States somewhere between min and max. After a few seconds slow and steady to the low towers.

  This could be a roadmap dsdt buggy, which affects only Linux.

  Problem is that Toshiba doesn't support this model of laptop for Linux and there is no tool available as Toshiba Power Saver for Windows power management.
  Try visiting some Linux forum and discuss it.

  On Linux forums, you will find the most useful information or people who might be using the same specifications with the same distribution of Linux.

• The specific letters are not available under Windows 7 drive letters

  1.) bought a new computer - a Windows 7.

  2.) proposed two hard drives from my old computer to the new computer.

  Each 1.5 TB drive has a single NTFS partition.

  (3.) I want to use the same drive letters, I used to have for these two partitions: Z: and G:

  Z: assigning to any readers was no problem.

  Assigning G: the other drive is impossible: Windows simply does not present G: as one of the options.  Available drive letters are ABEFMNOPQSTUVW.    The letters of drive in use are

  C (the primary partition on the new hard drive in original)

  D (DVD player)

  F (one of the hard drive from the old computer has moved new computer)

  L (USB HDD)

  R (mapped to profile just to keep simple traces, make it easy to find in the Solution Explorer, etc.).

  Z (one of the hard drives from the old computer has moved new computer)

  Even if I unplug the USB stick, unplug Z and don't map r: whereupon, letter G ever becomes available for anything.  I can change F to an easily - available drive letter and return to F - but I can't change it to G.

  How G in the drop-down list with all the other available drive letters?  By the way, where the hell are I, J and K?

  How G in the drop-down list with all the other available drive letters?  By the way, where the hell are I, J and K?

  The computer has a multi card reader? If so, they probably use these drive letters.

  To show empty drives:
  1. open Windows Explorer.
  2. click on organize.
  3. click on folder and Search Options and click the view tab.
  4. uncheck the hide drives empty in the computer folder, and then click OK.

  Check if it shows the missing disks and you can now assign.

• Satellite A100-998: mono/stereo mix not available under Vista

  Windows Vista and the Microsoft default value "High definition Audio Device" driver (automatically selected and installed by Setup of Vista), no recording device is listed with the exception of the Microphone, Line In, CD Audio, as in this screenshot of the A100-998 in question:
  http://img230.imageshack.us/img230/1981/a100998jp6.PNG

  No new Mix or record Waveout options of the device, which means that you can not, for example, doesn't record audio stream on the Internet. I tried the latest drivers from Realtek HD Audio for Vista (30/11/2006 R1.52). No change. Is there a way/driver to enable this as in other Windows Vista machines.

  Is also the audio material in the A100-998 "Vista Premium Ready" with the specifications set out in the http://www.optimalsound.net/?

  It's the third disappointment. The first two were that he has not delivered with the announced NVIDIA GF7400 (came to the square with 7300) and the second is that the hard drive is 4200 RPM (instead of the advertised 5400).
  The third issue is the audio issue detailed above.

  Here is a solution I found, but it is not free (costs $US28.20) and requires users to manually switch the "playback devices" each time that they execute it:
  http://www.NCH.com.au/SoundTap/index.html
  Unlike other programs like Audacity which are based on the Waveout/Mono/Stereo Mix as their sound source (and so do not work in this case), NCH SoundTap installs its own virtual driver and is therefore able to record everything you hear through your speakers in Windows Vista without the need for Waveout/Mono/Stereo Mix. "All the sound elements are"typed"by a pilot virtual directly in the kernel, so the process is perfect digital quality."

  However, it would be better that Vista Realtek/Toshiba/Microsoft "High definition Audio Device" driver is updated to include the Waveout/Mono/Stereo Mix (under "recording devices"), so that programs that rely on it are broken. SoundTap can do on Vista means that it is not a hardware limitation.

  PS new Vista sound effects as Loudness equalization, Room Correction, Bass Management and Virtual Surround are already supported in the current drivers Vista (the driver from Realtek v1.52 and that by default by Microsoft) in Satellite A100-998.

  Post edited by: [email protected]_UK

• Why the drop shadow is not available under the effect - style?

  I'm having the hardest right now time with the functionality of the illustrator of the drop shadow. It's nothing exists for me. I have the selected object I want to apply the effect to and the only option available is Scarlet contours. Nothing else is there as an option or even gray. I restarted my computer and closed Illustrator several times and that doesn't change. I have also opened up a whole new file and just drew a rectangle and went to effect - style and it still only gave me glowing edges. I'm at my wits end on this one.

  There are two submenus aesthetic. Glance to the top.

• Still not available under Creative Cloud Desktop App

  Hello

  I just purchased Premiere Pro CC 2014 as a single application

  and I'm trying to find out how to get the option to view the Premiere Pro CS6 so I can install to get installed yet.

  I have followed the docs online on how to do, but can't see an option under Apps to view previous versions, I just find new applications tab on the left and right all the Apps on the right, when I drop down all it gives me is an option to display the list of Apps like filter > applications Audio/Video, etc.

  In the show The installed at the top that I just listed

  First Pro CC

  Adobe Media Encoder

  classified both as everything up to date.

  I started with a trial of 2 above Apps, but have now just bought a license for single PP monthly App, I tried also incidentally loging in and out of the creative clouds, but always the same resutls.

  I wonder if the CC desktop application has changed since the tutorial yet?

  Thanks in advance.

  Beardedboss

  When I drop down all it gives me is an option to display the list of Apps like filter > all Apps, Audio/Video, etc.

  Down by the ETC and you will find the previous Version.

  

• default gateway not available under 8.1

  My brand new spectrum 13 Ultrabook cannot find the default gateway but connects to my wifi network. My other devices on the wifi network can all find the gateway and use the internet. 13 Ultrabook spectrum cannot... Please advise the steps to solve. Thanks a lot in breathless anticipation.

  SOLVED! Seems 8.1 does DNS differently to 8.0 and of course MS is unable to talk to someone. Download the latest driver for your card wifi on board and also update the firmware of your router with the latest revision. It worked for me, I hope it will help many people with the same problem. A BIG thank you to Microsoft for yet another farce of windows 8.

• FRM-10043 can not open the file under LINUX

  FRM-10043: could not open the file.
  I created a form correctly in windows. It works very well.
  Now, I have to use it under LINUX. Then I copied the fmb file in Linux
  where the default test.fmx is placed.
  
  Now, I've run the sub query and got the result can not open the file.
  
  
  [orabif@br bin] $ sh frmcmp_batch.sh userid=CNT/CNT@cmt
  compile_all = Yes module_type = form module = logonfile.fmb
  
  
  10.1 forms (form of the compiler) Version 10.1.2.0.2 (Production)
  
  10.1 forms (form compiler): Release-Production
  Copyright (c) 1982, 2005, Oracle.
  All rights reserved.
  
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  PL/SQL Version 10.1.0.4.2 (Production)
  Oracle V10.1.2.0.2 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle 10.1.0.4.0 Production CORE
  
  FRM-10043: could not open the file.
  
  Form not created
  
  
  Please help me solve this problem.
  
  * I know that there is no need to compile OLB files. but my forms display error that
  FRM-18108 has no dependent objects.
  
  When I use Frmcmp.sh GUI is the compiled form succesffully if there is no OLB attached with it.
  It gives Fr-18108 when OLB is attached with the form that he
  
  Timely help is needed...
  
  Thanks in advance...
  
  with cheers
  Sprity...

  spirty,
  This sounds like it could also be a permissions problem. I'm guessing that when you copy-n-Paste the form on the LINUX Server, you did what Windows Explorer. When they are copied to the server LINUX file will be created with the default privileges defined on the file. I recommend that you connect to the LINUX Server and check the permissions on the file. If your file permissions do not match the permissions of the text.fmb (or other files .fmb you have there) I suggest that you change the permissions so that they match.

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• plugin information under Linux

  Hello

  I'm looking for information plug-in for LabVIEW in Linux as we receive an error "Element is not supported, the plugin for the selected item is not installed on your system or the plug-in has expired license". The thing is that we might be able to see the Build-> option Installer to the project folder. We have a licensed version of system of professional development and I hope that do not have excedded the authorized number of Installation of LabVIEW 8.6.

  Please do help me.

  Thanks in advance,

  Vivek

  As the LabVIEW help explains, the creation of a Setup program is not supported under Linux. It is windows only.

• "Adobe Dynamic Link" option is not available

  Hello

  I have Adobe first CC and after effects CC 2014. The "Adobe Dynamic Link" option is not available under 'file' in Adobe Premiere. What should I do?

  I have a licensed copy of these two programs. I checked the firewall they allow .exe files needed etc.

  Thank you, Elliot

  That is right. You will have only dynamic links between applications of the same version.

  You install AE CC for DL.

  Or go for the first 2014 and 2014 AE.