Error 80200011 when you install the Kodak printer software.

Similar Questions

• error 0X800f0214 when you install the printer driver

  When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.

  Marc DS,
  It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc.  You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file.  There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify.  Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared.  I hope this helps.  Please post back with more information if you still need help.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• Error message when you install the printer driver

  First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

  My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

  Windows found driver software for your device but encountered an error trying to install it.

  In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

  If you know the manufacturer of your device, you can visit their website and check the support.
  My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

  Please sent me useful information.

  Thank you so much.you sent slove my problem how.

  It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
  step 1:
  Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
  step 2:
  Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
  step 3:
  I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
  step 4:
  I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
  I hope this answer helps anyone with a similar problem.

• Download 0x8007001F error message when you install the latest updates in Windows XP.

  Original title: problems with the update of my compooper (computing)

  Windows will not update it after updates KB2707511, KB2699988, KB2709162, KB2685939, KB2510531, KB2544521, KB2718704. I already got an answer to a clean boot and I did with no results, I also re installed IE8 with still no result. I get the 0x8007001F error code and all these updates keep in default even after using Mr. Fixit. This becomes a real headache. My computer is constantly freezing up and I lost my audio controls, it does not at the moment where opening tabs announces that there is a long list. Please, someone give me a remedy for this nightmare.

  Your suggestion of a clean boot is not resolution, I first had to remove a virus with Norton and then install the latest version of IE 8, then updates went through. I also had to use the Norton Power Eraser program in order to irradicate of other inhibitory start-up problems which were deeply rooted in my hard drive. Thank you for your attempt to help me, but I was the one who had to understand this. Now, my computer is high and GREAT work! I would say that MSN and Norton to collaborate in trouble all program and incorporate into the program of Mr.Fixit you who will remove the virus and update at the same time in order to avoid such a period of long downtime for all customers who have similar problems.

  Sincerely,

  Clinton joints

• Error 0X0000000D when you add the network printer at home

  Original title: try to add a printer to My Desktop 2 which is connected via a USB port on my desktop computer 1. Both are pre-cabled linked to my home network. They are both under Vista.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  1. Programs that you have problems with adding printer
  • Error 0X0000000D
  • Recent changes made to your computer no
  • What you have already tried to solve the problem, not yet

  Usually, you insert the printer cd in desktop1 and follow the procedure for setting up a shared printer / network

• Error 0x8007F064 when you install the update KB2718523 for Windows XP

  Installation error of update security for Windows XP (KB2718523) met 0x8007F064, what cause it past? How can I solve it?

  Thanks for posting the log file.

  First of all, have you had the opportunity to do a Windows repair installation recently?

  Then, download the file HERE. Save it to your desktop. Double-click on the file and let it run. Rate this file expires after 3 days if it is downloaded.

  Click on start > run > paste the command below and press ENTER. You should receive a success message. Let me know if you do not have.

  % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

  Then, restart the computer. Disable your anti-virus software and try to reinstall the update manually as in my post above.

  Display the results.

• Code Error 80070020 when you install the KB2756919 update

  It downloads NO MORE than 11% and it's all FAILED EVERY TIME!

  First, check the site Download of Windows for direct download on the update that gives you bad. Manually download your update from the following link, then right click on the downloaded file and run as administrator. Acknowledge the UAC warning and provide credentials if requested. This grant you elevated privileges that may be necessary to carry out the reconfiguration of the system.

  MS13-004: Description of the update of security for .NET Framework 3.0 Service Pack 2 on Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: 8 January 2013
  Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.

  How to reset the Windows Update components?

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  Start your computer in safe mode
  Any Windows Update file can be manually applied using this method. To quickly access the correct download, just replace the # part of the link with the numbered part of the KB update #.
  http://support.Microsoft.com/kb/###

• Windows Installer error wont let me install the hp printing software

  She keeps herself uninstall just after that an error message appears that says: "fatal error during installation, windows Installer Service is not to be accessible. This can occur if Windows Installer is not installed properly. Contact your support team. "However, I am able to install any other program.

  HP people have tried to help, but they say it's a Windows problem. How can I fix it?

  Thank you

  Von

  Hi, Vonique,
   
  Try these steps and check the result.
  Step 1: Disable all non-Microsoft programs and try to install the printer.
  1. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  3. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  4. click OK and then click on restart.
   
  Step 2: Once the computer is restarted, try the following steps.
  1. right click on the file to install printer software, click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2 follow the instructions in the wizard to install the software.
   
  Step 3: Once the printer is installed, start the computer in normal mode.
  1. click on start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.
   
  For more information, see http://support.microsoft.com/kb/929135
   
  For further assistance, contact the manufacturer of the printer.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When you install the adobe reader software to change some of my icons and programs all try to open with adobe instead of their exe files. If I delete the adobe reader software, then they return to their exe. files and work well. Why what is happening

  I am running windows vista and am trying to install Adobe Reader.
  My internet programs explore and the printer have changed the icon and the programs trying to open with adobe instead of their exe. If I delete then adobe, they work fine...

  Hi dabrown52,

  You can check out the following link and try the suggestions posted by Linney MVP on Friday, January 29, 2010 19:03 and check if it helps.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/d18cbb53-6c2e-437D-ae98-ebba1d80f582

  If the problem persists, you can try uninstalling and reinstalling adobe.

  You can try to uninstall all older versions, Adobe Acrobat , and see if the problem is resolved. Uninstall earlier versions of the application and then install the version you want. If multiple versions of Adobe Reader are installed on the system, remove all versions and install only one version.
  To do this, follow these steps:
  1. click on Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list of found files.
  2. double-click on the version of Acrobat or reader you want to uninstall.
  3. click on Yes if you are prompted to confirm that you want to uninstall the program.
  Note If you are prompted to confirm that you want to run the program, click on allow.
  4. click Yes to restart the computer.

  For more information, please visit the following links:
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/8730d9b6-2fa6-41d2-815F-e68c9d3619ce/

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 800719E4 when you install the update of security for Vista(KB972270/KB978207/KB951847)

  Hello

  I need help for error of update of address 3 for Vista security:

  (1) 800719E4 error during the installation of update of security for Vista (KB972270)
  (2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
  (3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Thank you

  See the section "How to get help", for example, http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 0x08007F0F4 error code when you install the KB2686509 update

  Were there any resolution to this problem?

  If so, what is the solution?

  see these topics for updates:

  1. http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

  2. http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-update-kb2686509-will-not-install-error/1df6306a-1bb1-47ac-941b-5779415b2e95

• Received the A12E1 error code when you install the adobe application manager?

  Received the error code A12E1

  Hello

  Please go through the mentioned thread: http://forums.adobe.com/thread/1002413

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft