Having a doubt concerning the direct IOM user configuration process

Similar Questions

• OIM 11 g change the tasks of user Xellerate process

  Hi all
  
  I try to send an email when a user IOM is disabled. To do this, that I would first notice for the "Disable User' on Xellerate user process task.
  
  However, any changes to attempt to process tasks gives this error:
  
  The security level for this data element indicates that it cannot be updated.
  Update failed.
  Update failed.
  
  Adding a subsequent update event handler does not work in 11 g more so.
  
  What would be the way suggested to send emails and adapters of fire on the changes to the user profile?
  
  
  Thanks for your thoughts.

  Can you create a task with a Disable trigger and attach your notification to this task?

  -Kevin

• access denied on the C: drive due to the destruction of user name accidentally safety on the properties of the c: drive

  By chance, I deleted all the names of users and groups in the security properties of the C: drive

  shortly after that I tried to access the C: drive and discovered that access was limited to it.

  I tried to use the Security Editor, but I'm also locked down because I don't have permission, even if I'm running the active user in administration settings.

  It is very annoying because I have most of my computer files on the C: drive, and I am unable to run application shortcuts from the desktop as the directory of all the shortcuts applicaions lead on the C: drive, which is is not accessible.

  So far, I tried to disabled UAC and other services concerning the name of user and groups, but also "access denied"...

  I'm not able to run CMD and RUN.exe of normal mode, but I can not in safe mode with command prompt,

  I therefore believe that any possible solution must be done under mode safe mode with CMD.

  I also tried to follow the instructions, but I had no success because the instructions was for someone with a vista and some of the directories mentioned files there is not applicatible for Windows 7.

  http://forums.techguy.org/Windows-Vista/831578-cant-regain-adminstrator-access.html (post #10)

  I heard that formatting the drive can bring back the factory settings and the previous user, but put names in form is not an option for me, I never run'ed a backup of the C: drive or its contents, thus losing all that data would be catastrophic for my financial and emotional state.

  Is their way of bringing user names I have both in the security properties of the C: drive?

  Hi Xerovoid,

  You can try the steps below.

  Step 1

  A. Click Start > computer

  B. right-click on the C: drive, click Properties.

  C. click on the Security tab

  D. click the Advanced button > owner > Edit

  E. make sure the replace the owner of subcontainers and objects box ischecked

  F. click apply, Ok

  G. wait until it changes ownership. (may take a while)

  H. check if the problem persists.

  Step 2

  If the above does not help you solve the problem then try the system restore on your computer.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• For the update for user in OIM11g

  Hello...
  
  To update a field (email ID) of a user learned about the following steps.
  1. change email IOM profile identification and save the user form
  2 IOM then checks compared to Lookup.USR_PROCESS_TRIGGERS searching for a task name that is mapped to the Email field - typically "change Email".
  3. Add a task in the name of the process of the supply of the system target like "change Email".
  4. now write code using the IOM API that will update the Email field of the target form system configuration process with the new Email ID.
  5. connect this adapter in change Email' task.
  6. then when the form of courses is updated that triggers a process task to update the Email for that given resources - "E-mail update"
  
  May I know what APIs are to be used for step 4 so that the update can take place of IOM form of process for the target system.
  
  Thank you.

  Amruta Agarwal wrote:
  Hello...

  To update a field (email ID) of a user learned about the following steps.
  1. change email IOM profile identification and save the user form
  2 IOM then checks compared to Lookup.USR_PROCESS_TRIGGERS searching for a task name that is mapped to the Email field - typically "change Email".
  3. Add a task in the name of the process of the supply of the system target like "change Email".
  4. now write code using the IOM API that will update the Email field of the target form system configuration process with the new Email ID.
  5. connect this adapter in change Email' task.
  6. then when the form of courses is updated that triggers a process task to update the Email for that given resources - "E-mail update"

  May I know what APIs are to be used for step 4 so that the update can take place of IOM form of process for the target system.

  Thank you.

  Just copy adapter that reads the user profile data and the copy to treat the form field.
  Not for Oracle:

  (1) assume a created a UDF: UDF USR_UDF_BUS_PHONE phone number called 'Phone number' form field users user defined in the Console Design

  (2) then double-click "Définition Lookup" under the tree of the Administration Console Design and query that this code "Lookup.USR_PROCESS_TRIGGERS".

  (3) add "Information of Code Lookup" like that.

  (i) enter the UDF column, created in step 1 for Code key as USR_UDF_BUS_PHONE
  (II) enter the word "Change" without the quotes, followed by the name of the field in the column UDF created in the column of Decode. So in this case decoding is "Change phone number" without the quotes
  (III) language: en
  (IV) country: U.S.

  (4) then create a task in process of type adapter
  (i) move to the tab list of Variable and create a variable 'var1' resolve at run time.
  task logic II) Add-> DEFINE the VARIABLE and click on continue
  (III) in the Add Set parameter Variable of the task dialog box, select return value of adapter in the drop-down variable name, Type of the operand as a Variable, the qualifier operand-> 'var1' created in 4i).

  (5) add a process task under the definition of process of the resource object in Design Console called "Change phone number" without the quotes. Note: The name of the task must be
  exactly even decode the value in the choice list definitions and then make it conditional and also check "allow multiple Instances".

  ((6) in the tab 'Integration' of the task add the adapter, you created in 4) then map it on the variables of the adapter.
  (i) card adapter return Variable to process the data, and then select the form field in process (example: UD_ADUSER_PHONE) that you want to update with field of Business USR_UDF_BUS_PHONE of the user's phone.
  (II) then map the other variable of the adapter to the definition of the user-> field of Business USR_UDF_BUS_PHONE of the user's phone card.

  Result: Now when business phone is updated, business phone user change will trigger in and inserted to this resource and copy the profile to your process change. If the connector already has the task of process 'Affairs updated phone' in the definition of process that has an adapter to update the target and then due to the update to business phone in the form of process, the 'Business phone day' task will be triggered and target will also be updated with the new change.

  HTH,
  BB

  Published by: bbagaria on Sep 5, 2011 10:44

• Why is the snmp Server user must be added to the configuration

  I find that when I download a new configuration of a router with tftp which I then go back and add the following lines

  Server SNMP user sxxi-sxxs_SNMP = sxxxxxQ SXBI v3 auth md5 TaXXXXXXEsp & home

  AND

  Enable SSH

  generate encryption rsa key

  768

  And when you do a show start or run the command you do not see the snmp-server user configuration.

  Is there a better way that I am I missing?

  An SNMP user shouldn't show in the running-config. Use 'display the snmp user '.

  For SSH, it is more difficult to know the reason. Maybe nothing is done in the right order. As the domain name must be written before "generate the rsa encryption key", etc.

• User customized user AD process defintiion confidently attribute map

  Hello

  I created 2 custom attributes in the form shape design console desinger UD_ADUSER and made the active version.

  (2) went to the resource object and added the reconciliation AD and AD user Trusted user mapping field and clicked on create a profile reconciliation.

  (3) went to the process definition and added cards filed for the definition of user AD process

  But when I go to the AD user confidence and try to create the field mapping, I'm not able to see custom fields created in the column "user attribute"?

  

  I have to do something else?

  Thank you

  The attributes of user show what UDF you have on the form user rather then the form of resources (AD in your case). The fields for which you want to map from your announcement of confidence, they are born on the user as UDF?

  -Marie

• Is there a limit on the number of users to create in the IOM?

  Hello
  I created about 6000 users in IOM by using the method.
  "IOM now not allow me to create more users give all the" DOBJ. Error INSERT_FAILED Insert failed. ».
  
  Is there a limit on the number of users to create in the IOM?
  
  Any help please.

  Hello

  There is no limit to any number of users that can be created in the IOM, but maybe it's because the limitation in the database table space, just try increasing the table space.

  Concerning
  YMI

• Conceptual doubts on the tasks of process by IOM

  Hello
  
  I have a little doubt about the performance of the tasks of process.
  
  I wanted to know: -.
  
  In what order are called the tasks of a particular process?
  How IOM to determine which task to call?
  What are the conditional tasks?
  Where to define conditions for these conditional tasks?
  
  Any help will be much appreciated.
  
  Thank you
  Abhishek

  The order in which the tasks are called depend on the triggers research associated with the resource.

  Conditional tasks are those that depend on an event fires. Unconditional tasks are those which will be triggered when you are asked for this object resource for example: create user task is a task without condition, which means it will be triggered as soon as the commissioning is triggered.

  and suppose you have a conditional task as 'name change', it's getting only fired when the field name is updated in the user form

• I want to create the user in the direct areas but I found thi message: the requested account name is already in use.

  Over the period of re - use the account in the domains.live

  I want to create the user in the direct areas but I found thi message

  The requested account name is already in use or has been used in the past and has not been through the waiting period required of re - use.

  Can you help me

  Hi, Ahmed.

  It seems that the domain name you have selected is not available (or has already been used and it is found that the previous owner of the domain has used the same user name as an account).  In any case we can not help you here.  You need help from domain.live.

  Please go to http://help.live.com/help.aspx?project=domains&market=en-us&querytype=keyword&query=SNIAMODTUOBA&tmt=&domain=domains.live.com&format=b1 and down, click on support and follow the prompts to get help.  Although it is technically to the implementation of the field, I'm sure that your application will be either still answered or they will direct you to the proper location for assistance.

  In addition, you can try http://windowslivehelp.com/product.aspx?productid=25 for help Windows Live Administration.  If you can not find help with solutions validated or by performing a search, try posting in the forums.  I suggest the following for the problem that you specified: http://windowslivehelp.com/forums.aspx?forumid=7e6f04c0-6a48-4719-98f4-a9729d34c76e.

  I hope this helps.

  Good luck!

• Microsoft Lync 2010: When you add users to the Conference for the first time without having to type anything, the chat window is grayed out.

  Hello

  Microsoft Lync 2010: When you add / invite users to the Conference for the first time without having to type in the chat window, the chat window is grayed out. I am not able to type anything in the chat window to continue the Conference.

  Thank you
  Rajeev G C

  Phone: 9886540640

  Hello Rajiv Iyer,

  There is a forum for questions about Microsoft Lync 2010.
  Click here for a link to repost your questions in forums Microsoft Lync.

  Thank you

  Marilyn

• error during the upgrade of form of the user in the sysadmin IOM console

  Hello

  While trying to update the UserForm, I get error below. What could be the problem here.

  It worked a few days back.

  [2015 07-29 T 10: 47:41.807 - 07:00] [oimext_server1] [NOTIFICATION] [] [oracle.iam.platform.entitymgr.impl] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 77744a889dde03de:4484be9e:14edad031c8 :-8000-0000000000000393,0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvQoy6OEoIs6wjyWMG1LiGdA000003] provider initialization data for the entity type - user of the type UserDataProvider

  [2015 07-29 T 10: 47:42.021 - 07:00] [oimext_server1] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:4484be9e:14edad031c8 :-8000-0000000000000393,0] [APP: oracle.iam.console.identity.sysadmin.ear #V2.0] [IDDM: 0000KvQoy6OEoIs6wjyWMG1LiGdA000003] ADF: addition of the following JSF error message: error returned is: JTA transaction suddenly cancelled (perhaps due to a timeout); nested exception is weblogic.transaction.RollbackException: an unexpected exception in beforeCompletion: sync=org.eclipse.persistence.transaction.JTASynchronizationListener@2120ece2 []

  Inner exception: java.sql.SQLException: ORA-01691: impossible to extend lob IAMEXT_OIM segment. SYS_LOB0000354182C00002$ $ by 128 in tablespace IAMEXT_OIM

  Error code: 1691

  Call: INSERT INTO USR_CONFIG_HISTORY (CFG_KEY, CFG_XML, ENTITY_TYPE, REASON, UPDATED_BY, UPDATED_DATE) VALUES (?,?,?,?,?,?)

  link = > [6 bound parameters]

  Query: InsertObjectQuery (oracle.iam.configservice.vo.ConfigAudit@2120ed23) oracle.iam.ui.platform.exception.OIMRuntimeException: error returned is: JTA transaction suddenly cancelled (perhaps due to a timeout); nested exception is weblogic.transaction.RollbackException: an unexpected exception in beforeCompletion: sync=org.eclipse.persistence.transaction.JTASynchronizationListener@2120ece2

  Inner exception: java.sql.SQLException: ORA-01691: impossible to extend lob IAMEXT_OIM segment. SYS_LOB0000354182C00002$ $ by 128 in tablespace IAMEXT_OIM

  Error code: 1691

  Call: INSERT INTO USR_CONFIG_HISTORY (CFG_KEY, CFG_XML, ENTITY_TYPE, REASON, UPDATED_BY, UPDATED_DATE) VALUES (?,?,?,?,?,?)

  link = > [6 bound parameters]

  Query: InsertObjectQuery (oracle.iam.configservice.vo.ConfigAudit@2120ed23)

  at oracle.iam.ui.platform.exception.OIMErrorHandler.reportServiceException(OIMErrorHandler.java:171)

  at oracle.iam.ui.platform.exception.OIMErrorHandler.reportException(OIMErrorHandler.java:65)

  at oracle.adf.model.binding.DCDataControl.reportException(DCDataControl.java:411)

  at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:424)

  at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:479)

  at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.reportException(JUCtrlActionBinding.java:2036)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1680)

  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:760)

  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:407)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:185)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:187)

  Thank you

  java.sql.SQLException: ORA-01691: impossible to extend lob IAMEXT_OIM segment. SYS_LOB0000354182C00002$ $ by 128 in tablespace IAMEXT_OIM

  This error indicates that your IAMEXT_OIM tablespace has reached the max limit.

  Increase the size of the tablespace or purge unnecessary data

• Locking ESXI option mode is grayed out in the direct Interface of the user Console (DCUI)?

  Immediately after installing ESXi, observes that set up the locking Mode is greyed out in the direct Interface of the user Console (DCUI).

  The host has not yet added to a vCenter Server. Please add and see

• How to upgrade the IOM user profile fields after the reconciliation of target user AD

  Hello

  I have a problem of set-aside. When I'm changing the values of the attributes of the user in Active Directory and then I run Active Directory target user Recon, AD in IOM account attributes are updated only but I would like to update the attributes in the IOM user profile too. Please, how can I do?

  Thank you.

  Milan

  You can create a personalized card which is your AD attributes flow into the user profile and add it as a response to the task 'receipt of update of reconciliation. "

  Use the UserManager api to update the user's profile.

• Measures to develop the event handler in 11 GR 2 IOM user name generation

  Friends,
  
  Can you please provide me steps to develop the event handler in GR 11, 2 IOM user name generation?
  
  Thank you
  Chakri

  The detailed procedure received in my blog for this. Take a look.

  http://Srini-bellamkonda.blogspot.com/2012/11/develope-pre-event-handler-to-generate.html

• users of the window having the right to kill a process window

  Hi, I would like to know which user has the previlage to kill a process in an emergency.

  namely, the administrators, backup operators, power users.

  Not all users have the right to schedule a task, and hoping in a similar way, not all users have the right to kill a process.

  Please help providing the information.

  The following article was written for Windows 2000, but applies particularly to XP as well.  It depends on if you kill the Task Manager task (administrative privilege required unless you own the process) or with the command "Kill" of the resource kit or using PsKill from Microsoft who claims to only require that the user have the privilege of "Debug".

  "Cannot complete the Service process with the Task Manager.
    <>http://support.Microsoft.com/kb/155075 >

  PsKill: <> http://technet.microsoft.com/en-us/sysinternals/bb896683 >

  HTH,
  JW