User customized user AD process defintiion confidently attribute map

Similar Questions

• LDAP on SAA with the attribute-map

  Hi all

  I have problems to set up authentication of VPN clients on a LDAP server.  The main problem is when the ASA needs to decide a strategy group for users of the non-compliance.

  I use the LDAP attribute cards in the SAA to map the parameter memberOf attribute group Cisco-policy, can I associate the ad group that the user must belong to a VPN and rigth memberOf Group Policy access.  This method works correctly.

  But the problem is when the remote user is not in the correct group AD, I put a group by default-policy - do not have access to this type of users.  After that, all users (authorized and unauthorized) fall into the same default - group policy do not have VPN access.

  There are the ASA configuration:

  LDAP LDAP attribute-map
  name of the memberOf Group Policy map
  map-value memberOf "cn = ASA_VPN, ou = ASA_VPN, OU = my group, dc = xxx, dc is com" RemoteAccess

  AAA-Server LDAP protocol ldap
  AAA-Server LDAP (inside) host 10.0.0.3
  or base LDAP-dn = "My group", dc = xxx, dc is com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = users, ou = "My group", dc = xxx, dc = com
  microsoft server type
  LDAP-attribute-map LDAP

  internal group NOACCESS strategy
  NOACCESS group policy attributes
  VPN - concurrent connections 0

  internal RemoteAccess group strategy
  Group Policy attributes RemoteAccess
  value of server DNS 10.0.0.3
  Protocol-tunnel-VPN IPSec
  field default value xxx.com

  tunnel-group RemoteAccess type remote access
  attributes global-tunnel-group RemoteAccess
  address-pool
  LDAP authentication group-server
  NOACCESS by default-group-policy
  tunnel-group ipsec-attributes RemoteAccess
  pre-shared key *.

  As you can see, I followed all of the examples available on the web site to solve the problem, but I can't get a good result.

  Does anyone have a solution for this problem?

  Kind regards

  Guzmán

  Guzman,

  It should work without a doubt, that is the part to refuse already works well and the user who has the correct memberOf attribute should certainly are mapped to Allow access policy and should therefore be allowed in.

  I think that's a bug as well, but I had a quick glance and see nothing correspondent, and if it was a bug in 8.2.3. so I'm not expecting you to be the first customer to discover this, so I'm still more inclined to think that it's something in the config that we neglect (I know frome experience typo can sometimes be very difficult to spot).

  Could you get "debug aaa 255 Commons", so please, maybe that will tell us something.

  BTW, just to be sure: you don't don't have anything (such as vpn - connections) configured in the DfltGrpPolicy, did you? Just double check since your access policy Allow would inherit that.

  Maybe another test, explicitly configure a nonzero value for this parameter in the policy allow access, i.e.

  Group Policy allow access attrib

  VPN - 10 concurrent connections

  Herbert

• Attribute map

  What table stores the attributes mapping information? By ex. How can I know what the HZ_CUST_PROFILE_AMTS column. Attribute1 is really?
  
  Kind regards
  Dinesh.

  SELECT   dff.descriptive_flexfield_name, dff.application_table_name,
           app.application_short_name app, u.descriptive_flex_context_code,
           u.application_column_name, u.end_user_column_name
      FROM fnd_descr_flex_column_usages u,
           fnd_descriptive_flexs dff,
           fnd_application app
     WHERE u.descriptive_flexfield_name NOT LIKE '$SRS$.%'
       AND dff.descriptive_flexfield_name = u.descriptive_flexfield_name
       AND app.application_id = dff.table_application_id
  ORDER BY app.application_short_name,
           descriptive_flexfield_name,
           descriptive_flex_context_code,
           TO_NUMBER (REGEXP_REPLACE (u.application_column_name, '[^0-9]'));
  

  Credit goes to http://wdding.blogspot.com/

  Hope this helps,
  Sandeep Gandhi

• Modification of user OID according to IOM attribute container

  Hi all
  
  I am using OIM 11 g with LDAP synchronization to OID.
  
  I have configured LDAP container rules according to the Country attribute. So when I give a country during the creation of the user, then it moves to the container specified for the IOM.
  
  Now, the problem is that I want that whenever the country of this user is updated... it should move to its respective container. but now the container is considered only at creation time and so user don't move from one container to another.
  
  Can you please tell me how I can achieve this.
  
  Thank you!!
  
  TJ

  You can try to update the user "usr_ldap_dn" or "usr_ldap_organization_unit" attribute and see if that moves users.

  -Kevin

• Having a doubt concerning the direct IOM user configuration process

  Hi all
  
  I have a requirement in OIM 11 g where I want to give a user the right to access the features to create a user in the Admin tab. I'm able to do. But now, when the said user create user, the new user is created directly in the database of the IOM and then the strategy of access and everything gets evaluated. However I want to achieve is that when the user puts all the information in the page of the user to create and then click on save button, instead of get created directly in the database of the IOM, it should first go for approval to the Manager of the user admin and then commissioning based IOM and other targets resources should occur once the request is approved. I know that this is possible in the provision of application and I already did. But I need to work with the tab Administration Create User as well since based application delivery is something more long and may need 3-4 steps of Self-Service instead of creating user live stage available on the Admin tab.
  
  Is it possible to do? Maybe use the console design or something, I'm not sure. Please guide me still.
  
  Thank you
  $id

  Most of the time Yes. Make sure just that stand out from the STANDARD Administration page to create users and your own a custom.

  -Kevin

• Attribute mapping between ldap and ecm11g internal user profile user

  Hi all
  
  I use ucm11g, is there a way to map between ldap and ecm11g internal user profile user attributes? I tested with an attribute named homephone wls embeded LDAP, create the attribute homephone in ecm11g the user after login profile, I can't find the value in the ecm11g user profile.
  
  Best regards

  In earlier versions, there was LDAPProvider which was replaced by JpsUserProvider to 11g. This component allows you to do a bit in the interface, but there are a few more options which do not seem to be documented. For example, if you have a HomePhone field and enter 123456789 inside and then empty, by default, the JpsUserProvider component will not empty field the Complutense University of MADRID. You can change this by entering ClearMissingAttributes = true in the provider.hda file. Or if you want to use the credentials, you will need to change provider.hda with ProviderCredentialsMap = name_of_map (my source for the latter was the ECM blog at http://blogs.oracle.com/ecmarch/2011/03/).

  For more information on JpsUserProvider, look in the Administrator's Guide:

  When to add JPS provider: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10792/c02_settings007.htm#CSMSP496

  Adding a JPS Provider: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e10792/c02_settings007.htm#BEIIAHHI

  I hope this helps!

  Frank.

• OIM 11 g change the tasks of user Xellerate process

  Hi all
  
  I try to send an email when a user IOM is disabled. To do this, that I would first notice for the "Disable User' on Xellerate user process task.
  
  However, any changes to attempt to process tasks gives this error:
  
  The security level for this data element indicates that it cannot be updated.
  Update failed.
  Update failed.
  
  Adding a subsequent update event handler does not work in 11 g more so.
  
  What would be the way suggested to send emails and adapters of fire on the changes to the user profile?
  
  
  Thanks for your thoughts.

  Can you create a task with a Disable trigger and attach your notification to this task?

  -Kevin

• Spread of the update of the form to the user for processing the form

  I use GTC to database user configuration. Provisioning works very well. but when I update a user form field using connection xelsysadm changes are not spread user form to process the form. I checked the search values. USR_PROCESS_TRIGGER which is "Update password". Help, please.

  Hello

  Please read this post.
  Kevin and myself have it explained in detail.

  IOM password

  Concerning
  Nitesh

• Sun solaris user define process

  Hi friend;
  
  Need your help once more. I do installation on Sun can you show me a way how I can configure the maximum number of users in Sun Solaris Sparc(didn't learn yet their version,still waiting response) source.
  
  How can I make those?
  
  X display server
  
  X display I will use this right:
  
  RPM - qa vnc < < if it exists I'll run
  
  vncserver-geometry 24 - depth 1280 x 1024 (should I say starting the service VNC server or something like that?)
  
  
  The value of umask 022:
  Set the 'ulimit' as 'unlimited': (using Korn Shell)
  
  Can I define where and how?
  
  The following command displays the current settings of ulimit:
  
  I should put those in root, applmgr and oramgr, if I'm below I just put their right session? If so how I can put these value permanently?
  
  $ ulimit - a
  
  Time (seconds): unlimited
  file (Blocks): unlimited
  Data (KBytes): 131072
  Stack (KBytes): 2048
  Memory (KBytes): 216272
  coredump (Blocks): unlimited
  nofiles (descriptors): 4096
  Vmemory (KBytes): 1048576
  
  Set them all as unlimited as follows:
  
  ulimit unlimited t
  ulimit unlimited f
  ulimit unlimited d
  ulimit-s unlimited
  ulimit unlimited m
  ulimit unlimited-c
  ulimit-n unlimited
  ulimit - v unlimited
  =================================================
  Section 5: Additional steps to Solaris SPARC from Sun
  =================================================
  
  Make sure that/usr/ccs/bin, / usr/bin and "/ bin" appear in the $PATH before/usr/ucb.
  The "tr" must be in the directory/usr/bin instead of/usr/ucb.
  
  If this is the case, change your $PATH as follows:
  / usr/bin: / usr/ccs/bin: / usr/sbin /: usr/ucb
  
  I use echo $PATH if they are does not exist in the path what should I type?
  
  Thank you very much

  Hello

  the VNC Server service started?

  See (Note: 181244.1 - Configuration of VNC or XVFB as the X to 11i Applications Server).

  If I want to put these permenantly of value for the user root-appl and db I type these variables their .profile?

  You are referring to values of Wha?

  To create user and group orders as long as the same as linux?

  g s/n useradd-d/home/yyyy yyyy

  Groupadd dba

  useradd
  http://docs.Sun.com/app/docs/doc/816-5166/useradd-1M?a=view

  Groupadd
  http://docs.Sun.com/app/docs/doc/802-5747-1M/6i9g1e15j?l=SV&a=view

  Kind regards
  Hussein

• You can assign a user created VM an agent attribute?

  Hello

  Just learn HA restart prioritize virtual machines in 5.0. I understand it is that, following this order of category;

  Agent VMs

  FT secondary VMs

  High

  Medium

  Low

  If you had a virtual computer that you considered critical to be in place between all first VMs in a failure scenario HA host is possible to assign a virtual machine an attribute, such that it would be considered a VM Agent as a system assigned for example vShield Endpoint?

  Kind regards

  Victor

  Oops wrong link:

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ext-solutions-50.PDF

• ACS 5.2 - Adding custom for Juniper Netscreen GANYMEDE + authentication attributes

  Hello

  I'm trying to add custom for authentication Juniper Netscreen GANYMEDE + an ACS v5.2 attributes. The notice is to add it to the group as follows:

  ervice = netscreen { vsys = root privilege = read-write }

  I know how this adds a version v4.x ACS

  

  However, I do not know how to apply this to the attribiutes custom to an ACS v5.x

  

  Can I add the vsys and privilege attribute separately or together? What should be the attribute name? NetScreen? Should it be mandatory?

  Advice please

  Make groups of different volumes and shell authorization profiles mapped to different profiles fixed my problem BTW.

  This is the configuration I did for Juniper. I'll try the netscreen (last photo) later today ' today/tomorrow

  

  

• Get the error when creating custom 11.1.2.3 planning attributes

  Hello

  I am trying to create a custom attribute to a sparse dimension in my classic planning application, but while the updating of the database, a 1060114 error occurs. How to solve this problem, please suggest.

  Thank you

  Here you go https://support.oracle.com/rs?type=doc&id=1408609.1)

  Concerning

  Celvin

• How to add a custom 11.1.1.6 OID attribute?

  I'm new to OID and am having some problems with the addition of a custom attribute, specifically with the required field called "ID of the object. How can I find what should be placed? A preview of all this is greatly appreciated.

  Thank you!

  Anthony

  Hello

  You can use the following link http://onlineappsdba.com/index.php/2010/12/14/how-to-add-custom-attributes-object-classes-in-oid-from-command-line-or-gui/

  The object ID must be unique. You can take all the attributes OOTB and increment the ID of the object so that its unique and you can use it.

  ~ J

• The Siebel data model with attribute mapping rule OPA?

  Hello
  
  Someone at - it has mapped siebel attribute of data model with the attribute rulefiles (rule of word doc file) (for example, p1, p2, p3... generated automatically)?
  
  I imported the siebel data model in OPM version 10.2. He created siebeldatmodel.xsrc file. all siebel attribute created with ID, model ID with the same name as the name attribute of siebel. but in the rulebook, we attributte with p1, p2, p3... names etc.
  
  The problem I am facing at I'm not able to map the attribute siebel generated with attribute (p1, p2, p3) rule book
  
  Any quick suggestions of experts will be very apperciable.
  
  
  Thank you

  There are a few simple rules for text attributes.

  1. unless the attribute belongs to the global level, the attribute must have the text of the entity included in its text. Thus, if the attribute belongs to the 'contact' it must understand that in its text. The possible options are:

  "* the contact work country."

  "the country of work of * the * contact."

  2. you cannot have two attributes with the same public name or the same text. So, you will get an error if you have two attributes with the same text "the country of work.

  Published by: frank.hampshire on July 27, 2011 13:50

  Published by: frank.hampshire on July 27, 2011 13:50

• Adding custom in iPlanet attributes resource user

  I have a custom attribute in LDAP called "CustomAttr1" created. I would like to add this attribute in user RO iPlanet so that I can update this attribute by the IOM. What is the process to add this attribute to the user iPlanet process and forms?

  Have you checked the Document connector and particularly the section where it says "extending of the connector?
  This: http://docs.oracle.com/cd/E11223_01/doc.904/e10446/custom.htm#CDEGCCEB

  -Marie