Having doubt about Eric boss with as

Sir I want to know the chain begins with _ in the name column
The table column look like

name
--------
_raja
_verma

Hello

Looks like you are looking for a similar State to:

where substr(name,1,1) = '_'

Tags: Database

Similar Questions

  • Doubts about RAC infrastructure with a disk array

    Hello everyone,

    I am writing because we have a doubt about the correct infrastructure to implement RAC.

    Please, let me first explain the current design we use for storage Oracle DB. Currently, we are conducting multiple instances in multiple servers, all connected to a SAN disk storage array. As we know that it is a single point of failure so we have redundant controlfiles, archiveds and Orde in the table and in the internal drive of each server, in which case table has completely failed us 'just' need to recover cold backup nightly, applied hoops and Oder and everything is ok. This is possible because we have autonomous bodies and we can assume that this downtime of 1 hour.

    Now, we want to use these servers and implementing this table to a RAC solution and we know that this table is our only point of failure and wonder if it is possible to have a RAC multi-user solution (not AS a node) with controlfiles/archs/oder redundant internal drives. Is it possible to have each written full node RAC controlfiles/archs/oder in drives internal and applies these files systematically when the ASM filesystem used for CARS is restorations (i.e. with a softlink in an internal drive and using a single node)? Maybe the recommended solution is to have a second table to avoid this single point of failure?

    Thank you very much!

    CSSL wrote:

    Maybe the recommended solution is to have a second table to avoid this single point of failure?

    Fix. It is the right solution.

    In this case, you can also decide to simply use the distribution on both tables and mirror of the array1 array2 on table data using the ASM redundancy options.

    Keep in mind that the redundancy is also necessary for connectivity. If you need at least 2 switches to connect on two tables and two HBA ports on each server, 2 fibers running, one to each switch. You will need driver multichannel s/w on the server to deal with the multiple I/O paths for storing same lun.

    Similarly, you will need to repeat this step for your Interconnect. 2 private switches, 2 cards on each server which are pasted. Connect then these 2 network cards on the 2 switches, one NETWORK card per switch.

    Also, don't forget to spare parts. Spare switches (one for the storage and interconnection). Spare cables - fiber and everything that is used for the interconnection.

    Bottom line - not a cheap to have a redundancy solution. What we can do is to combine the layer of Protocol/connection of storage with the interconnection layer and run both on the same architecture. Oracle database machine and Exadata storage to servers. You can run your storage Protocol (e.g. PRSS) and your Protocol (TCP or RDS) interconnection on the same 40 GB Infiniband infrastructure.

    As well as 2 switches Infiniband are needed for redundancy, plus 1 spare. With each server running a dual port HCA and one cable for each of these 2 switches.

  • Having doubts about the logical operators and, or.

    I wrote a query as

    Select ename emp where mgr = 7902 or sal = 1600 and employment = "seller."

    The o/p of the above query is

    Ename
    Smith

    I cannot understand the o/p, which he gave to me.

    the table is
    EMPNO, ENAME, JOB HIREDATE DEPTNO COMM SAL MGR
    ---------- ---------- --------- ---------- --------- ---------- ---------- ----------
    7369 SMITH COMMITTED 7902 17 DECEMBER 20 800 80
    7499 ALLEN 7698 1600 20 FEBRUARY SALESMAN 81 300 30
    7521 WARD 7698 1250 22 FEBRUARY SALESMAN 81 500 30
    7566 JONES MANAGER 7839 2975 2 APRIL 81 20
    7654 MARTIN 7698 28 - SEP - 81 1250 1400 30 SALESMAN
    7698 BLAKE MANAGER 7839 2850 MAY 1, 81 30
    7782 CLARK MANAGER 7839 2450 JUNE 9 81 10
    7788 SCOTT ANALYST 7566 3000 APRIL 19, 87 20
    PRESIDENT OF 7839 17 NOVEMBER KING 81 5000 10
    7844 TURNER 7698 08 - SEP - 81 1500 0 30 SALESMAN
    7876 ADAMS 7788 1100 23 MAY CLERK 87 20

    EMPNO, ENAME, JOB HIREDATE DEPTNO COMM SAL MGR
    ---------- ---------- --------- ---------- --------- ---------- ---------- ----------
    7900 7698 DECEMBER 3, CLERK JAMES 81 950 30
    7902 7566 3000 3 DECEMBER ANALYST FORD 81 20
    7934 MILLER COMMITTED JANUARY 7782 1300 23 82 10

    Please check again.
    The query is very well.
    I assume you are using version Oracle 11 g and schema scott!

    SQL> ed
Wrote file afiedt.buf

  1* select ename from emp where mgr=7902 or (sal=1600 and job='salesman')
SQL> /

ENAME
----------
SMITH

SQL>

    Thank you!

  • . can howb I find information about a moblile with number?

    . can howb I find information about a moblile with number?

    What number, information and mobile are you referring?

    Please see: http://support.microsoft.com/kb/555375 on how to ask a question effectively. It is in your own interest to do as this increases your chances of having an answer quickly to your question correctly.

  • Doubts about licenses

    Hi all

    I have a few doubts about the price of licenses.

    I understand, I can deploy an APEX Server 11g XE free of charge, but what happens, if I want to install, a version no XE?

    Imagine a billing application, for 10 users, and I will assume that a Standard is sufficient. With the help of [this price list | http://www.oracle.com/us/corporate/pricing/technology-price-list-070617.pdf], how much exactly will cost?

    I understand I can get a license by user or server, or I have to license user and server too?

    Kind regards.

    Hello
    metric license is named plu user or license CPU (see the table of the core).

    for a quote, you can take a look in the oracle store or ask your dealer for an exact price oracle.

    concerning
    Peter

  • I have a doubt about the file .folio and publications

    Hello, I m new here.

    I want to start working with DPS, but I have a doubt about which version to buy.

    At the moment I have one customer just wants to publish a magazine, but my intention is to have more customers and publish more magazines.

    If I buy the unique edition of DPS, I read that I can publish a single file .folio. What it means? Each folio file represents a publication?

    Please, I need help to understand this before you purchase the software.

    Thank you very much

    Paul

    Here's a quick blog I wrote to compare the simple edition and

    multifolio apps:

    http://boblevine.us/Digital-Publishing-Suite-101-single-Edition-vs-multi-Folio-apps/

    Bob

  • I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

    I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Having a lot of trouble with updates.

    Having a lot of trouble with updates. Windows updates do not settle with error code 0 x 643. Fix from MS Computer Center said as he repaired software update. This does not resolve the issue. Fix MS datacenter failed with code 16977922-2147024894. Troubleshooting MS Wizard had had to close with an unexpected error code 0 x 80040154.  Norton updates fails with an error unexpected 0x000003E8. Update of Skype have also failed.

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

    Method 2:
    Try to perform the clean boot, and then check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  • I read this topic (I have a lot of questions about Xperia Z2 with lollipop)

    Hello world. I read this topic (I have a lot of questions about Xperia Z2 with lollipop) and I have posted a question, but it seems that no one saw him. That means the following: (how can I install the source application unknown to other users in my phone because it is to the unknown source menu is disabled in the settings-> Security)? This means that I can not install all the apps if I switch to the lollipop? Can someone tell me please the exact meaning of this?

    Thank you.

    It's true, but game store will not need this option checked - loading of a file manager will - but which is not say that the application will work once installed

  • Vista seems to ignore the free arp packets. There are details about this problem with Vista?

    There are details about this problem with Vista?  Thks Jerry

    Hi Jerry.Smith

    You can check this link for more information:

    http://social.technet.Microsoft.com/forums/en-us/winserverPN/thread/c6cb9f57-7D5D-4B75-A79A-ff0806300fbe

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

    Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

    Sorry to repeat

    Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

    When it gets to this point, it is probably better to start from scratch.

    First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

    Then go to the following link to download the full installer for the reader.

    https://get.Adobe.com/reader/Enterprise/

  • Having problems downloading/getting started with Photoshop

    Just bought the membership. Having problems download/getting started with Photoshop. Try once then maybe interfering. When I go into Photoshop, it says it has expired! Don't see how I can remedy this.

    Hello Sharon,

    In addition you can also consult the help below document:

    Please check the help below document:

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Kind regards

    Sheena

  • I just downloaded the new DC Acrobat, and I'm having a lot of problems with it. It's very, very slow. He has opening, saving, closing, do anything. Is there something that can be done to help him run a little more, well, normally?

    I just downloaded the new DC Acrobat, and I'm having a lot of problems with it. It's very, very slow. He has opening, saving, closing, do anything. Is there something that can be done to help him run a little more, well, normally?

    I fixed it! I used the string analyze function waiting in the Task Manager while opening a PDF file and have to wait 12 seconds... and it showed that the wait chain has been blocked by the Speech SDK. So I went to my Plugins of PDF from Adobe folder, which in my case is C:\Program Files (x 86) \Adobe\Acrobat DC\Acrobat\plug_ins and delete the plugin ReadOutLoud.api. (I had to close all instances of Acrobat DC first, and I had to also click the UAC Popup Windows application approval raised to remove the plugin) Now... instant Adobe Acrobat DC charge!

  • I'm having a problem of design with photoshop for my site.

    I'm having a problem of design with photoshop for my site. www.satoriwaters.com.If someone can help me that would be great.

    As said by Mr. Pfaffenbichler, explain the problem correctly and provide the necessary technical information such as what version of PS, what system and so on.

    Mylenium

  • Doubts about event handlers

    Hello

    I had some doubts about the event handlers in the IOM 11.1.1.5...

    (1) I want to use the same event handler for the message insert and update Post task... Can I use the same handler for this... If Yes, then how can I make...

    (2) can I create the single class of Plugin.xml and add all the jar files in IE single lib folder and zip them all together... If yes then what changes I need to do? Need only add that the plugin tags for different class in the plugin.xml file files? OR need to do something extra too...?

    (3) if I need to change something in any class handler... Is it need to unregister the plugin and register again...?
    If Yes... Is it need to delete the event handler using the weblogicDeleteMetadata command?

    (4) that we import the event handler of the path as event manager/db /... If we add all the evetn handler.xml files in this folder... As when importing weblogicImportMetadata called recursively all files in this folder... Now, if I need to change anything in one of the event handler class... so if import us from the same event manager/db folder... What to do... Create the copy of the eventhandlers? OR should I not add Eventhandler.xml files to class files, I made the changes...

    (5) given that I need to create emails on the creation of the user while recon and identification of email updated as a first name or surname updates... I had to use in the event handler.xml (entity-type = 'User' operation = "CRΘER") or something else...


    Help me clarify my doubts...

    Yes, on the update post you need to be check first if the first and last name change to update the mail electronic id, rather then calculation always email identification. So, you can check the path name are updated through the previous code.

    -Marie

Maybe you are looking for