Having great difficulty with BootCamp

Similar Questions

• Hi all I'm having some difficulty with a send button to send a PDF file

  I use Adobe Livecycle Designer ES 8.2 to create a purchase order with a shipment by e-mail at the end button.

  The button works fine and sends the form to sales@*.ie. My problem is that the form is editable by the front desk that I don't want.

  Is it possible to create a script submission before you change the file to read only or non-interactive and the withdrawal of printing / validate buttons.

  I've been at this for hours and have looked everywhere and found nothing.

  I'm new on this and would appreciate the help.

  Thank you

  Check the discussion below...

  http://forums.Adobe.com/message/2801672#2801672

  Also, make sure you checked the option box 'Automatically' to ' preserve Script changes to form when saved... "

  Thank you

  Srini

• Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

  My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

  I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

  This problem happened in video mode.

  I hope that there is a setting I have to toggle to make this objective work in Live View mode?

  Thank you

  Mark

  I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

  The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

  The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

  So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

  I would still recommend this camera to a friend.

• Activation of Windows 7 with bootcamp and virtualbox problem

  How to correctly activate my Windows 7 Professional works on two different configurations. With Bootcamp and Virtual Box? This used to work great until an update does not allow me more. I have it setup where I can boot into parrel with my mac or by itself with bootcamp.

  Any ideas? Thank you

  You must have separate licenses for two instances of Windows 7 Professional. Both facilities are considered to be different computers. The VM (VirtualBox) and BootCamp are regarded as separate computers.

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Luvin 3.1, but just a few questions on machines with bootcamp...

  Hi all, v3.1 is fantastic and everything works fine. But I have some questions that the admin of de facto in a studio with lotsa imacs. What I do for machines with boot camp, it is creating a WINCLONE of an image for deployment and perform restorations on the machine with bootcamp when I want to update. Works perfectly :)

  But I wonder if using VMWare to make updates on my main image will in any way mess things, in other words, when a player of bootcamp partition running virtual in VMWare interface, installation of software and whatnot will be the same as if the installation of the software if the native boot? In more words, have VMWare tools installed on the Boot Camp partition will do anything to disrupt things when running native than boot camp?

  Many Boot Camps that I update don't have VMWare installed, because they are mainly used on the side PC anyway, to these people that I can not/never get clean windows. I want to assure you that I am not having problems using VMWare on the master Bootcamp partition that I use to clone.

  And just a side note: while I like your product, I can't tell you how much not having not not firewire support in virtual images is to play with a / V. Heads We absolutely need to have support firewire audio and video workstations. If there is support, I would never mess with boot camp again!

  Well, thx and hope to hear from you soon.

  Jigs

  Herojig says:

  But, I wonder if using VMware (Fusion) to make updates on my main image in any way will mess up things, in other words, when a Boot Camp partition drive is virtual running in the interface of VMware (Fusion), installation of software and which will not be the same as if installation of the software if the native boot? In still more words, will have the VMware Tools installed on the Boot Camp partition anything to disrupt things during this training camp native execution?

  Yes, you can perform maintenance of software (for example patches from Microsoft) for the Boot Camp partition in VMware Fusion almost identical initializing natively in the machine.  The only differences are the detection for device drivers that need to access the host hardware to update (this should be very rare).  Update in general things like Windows, Office, Adobe CS/Acrobat, etc. will be fine.

  As for VMware in Boot Camp tools, virtual pilots are designed to remain latent (inactive) without any problems, that is not loaded == not used.  There is only one question: activation software updates.  VMware swap files of activation for Windows and Office preserve activation in each environment.  If you move the activation of copies of Vista, 7, Office 2007/2010 via WinClone, this will trigger reactivation.  Also starting in VMware Fusion will require more activation by machine for VMware environments and British Colombia are activated.  As long as you don't replace Boot Camp partitions, activations should stay.  For the use of this type of activation, he preferred to a Service (KMS) key management to manage your licenses on site because copies at retail have limited the number of activations.

• Problem with Bootcamp

  Hello, I have a late 2013 15 "Macbook Pro. Creating a partition using boot camp, the laptop screen went black, but I could see a non-mobile mouse pointer.  Fans on the Macbook Pro started to turn very hard.

  I gave him a few minutes, but nothing did, then I hit the power button.  After the laptop came back upward, I noticed that a partition has been created called "BOOTCAMP".

  I rebooted the laptop, press the "Option" key and Windows 10 setup via USB.  However, after entering my product key (I bought 10 Windows on USB key), I get a message that says something like: "No found images."  To install Windows, I use a custom USB key that I used with BootCamp.  I think I don't need to use the USB that was in the box of Windows 10.

  I don't know what happened here and wanted to know if someone could provide assistance.  Thank you!

  I am not sure, but I think that this happens when the key cannot be validated with microsoft.

  Try to enter the product key and see if you can then install windows 10 and then try to activate later.

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• Having a problem with loading in the combustion chamber

  Hello

  I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.

  Here is the URL of the page to take a look:
  _{Specific link removed by moderator display ~ J99} < sitename >.com/top-10/top...services/

  No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.

  Thanks in advance,

  Mike

  There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.

  P.S. Note only forum content in the resolved threads is now indexed by search engines.

  (Last updated: February 14, 2015 08:45 CEST)

  Solved the locked thread now ~ J99

• I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version

  I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?

  Yes, see this article:

  • Import bookmarks and data personal from another browser

  After:

  • Update to the latest version of Firefox

• I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A &amp; B. A is the way it should lo

  I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
  It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
  [email address removed to protect your privacy and security]

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Windows with Bootcamp on iMac with only SSD HD?

  I would like to run Windows with Bootcamp on my iMac. Retina iMac late 2014 with no internal hard drive, only the SSD and the 10.11.4. After countless tests, I dropped; I ask the community, is - it possible at all?

  Yes, but your post is so incomplete, you did not provide details of what errors you got. Chances are you have too small a SSD and simply do not have enough space.

  Finally, I ask the moderator to move this thread on the forum of Boot Camp. This is an iMac general forum where most users use only OS X.

• Installation of windows 7 with bootcamp

  In discussions with Apple Support technicians, I was led to believe that the MacBook Pro machines supported Windows 7 and above. However, when trying to install Windows 7 with Bootcamp Assistant, I learned that Windows 7 is not supported and I must have Windows 8 or higher.

  Is there a work around? Or do I have to get a license of Windows 8?

  For BootCamp, there is no work-around: Win8 or Win10 are your choices. However, such as Parallels Desktop virtualization solutions can run any version of Windows and can be a viable solution for you.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?