Installation of windows 7 with bootcamp

Similar Questions

• Installation of Windows 7 with new HD failure

  Background information:

  Just bought a new WD 1 b HD for my laptop Latitude E6510. Has decided to install Windows 7 64 bit version at the same time.

  Problem:

  I get about 3/4 the way through the installation and "Complete the Installation" (where system restarts normally several times)... the screen blinks several times, and then restart. Loading Windows comes up and then a mistake with this message, "installation of Windows could not configure Windows to run on a hardware on this computer." I click ok, the system reboots, I get a "Setup is starting Services", then the same error once again!

  I try to come back just to recharge my 32-bit version of Windows 7 and I get the same error.

  Aid or reflections on this issue, would be greatly appreciated.

  Load the Intel Rapid Storage Technology driver F6Flpy SATA driver during installation. You can get one from Dell drivers and downloads directly to your model or go directly to Intel:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3449&DwnldID=22676&keyword=Intel+rapid+storage+technology&lang=eng

  See the Windows reinstallation Guide - clean install Windows 7 step 6 and 8 for more details:

• Activation of Windows 7 with bootcamp and virtualbox problem

  How to correctly activate my Windows 7 Professional works on two different configurations. With Bootcamp and Virtual Box? This used to work great until an update does not allow me more. I have it setup where I can boot into parrel with my mac or by itself with bootcamp.

  Any ideas? Thank you

  You must have separate licenses for two instances of Windows 7 Professional. Both facilities are considered to be different computers. The VM (VirtualBox) and BootCamp are regarded as separate computers.

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Why the sound does not work in Windows 10 with BootCamp installed on MacBook Pro mid 2012

  So, I recently had a mistake huge hard drive, then I formatted the drive and installed Windows 10 I downloaded the BootCamp 5.1.5621 software (which is the version for this computer) and my audio didn't work. I've used Windows 8.1 in the past without Activation, but that was a few months ago. I've deleted it 2 days after I put it on the computer, but all drivers well worked out there. Although I plug in a USB headset and audio installed and worked fine! Help, please! I even reinstalled BootCamp!

  I have the same Macbook Pro 2012 with boot camp and dual boot Windows-10 and Sierra.

  Everything works fine. I think you have the wrong boot camp files.

  I think that you need version 6. Reconnect to OS X and run the boot camp assistant and try to download new files from boot camp.

• instalation of lightroom6 rejects installation on Windows 7 with note that windows vista is not supported

  I tried to install Lightroom 6 on my Windows 7 system

  The installer jejects the Installation with the remark that Windows Vista is not taken in charge by this product

  Is - this known issue? Any solution is available?

  Thanks for all your ideas,

  the solution was simple in case you know. The Installation CD includes an additional folder "Win Support files", where annother exe file is included. Using this exe file implementation of work.

  Could be better designed by Adobe.

  Concerning

  Michael

• R12 Installation on Windows XP (with Cygwin) fails with the error

  Hi all
  
  I try to install R12 on my PC with 32-bit Windows. In the control of pre-installation phase, I get the error:
  
  ===============================================================================================
  
  System utilities
  
  command: cmd.exe /c F:\StageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin C:\Oracle_Prereq_SWs\VCPlus
  
  F:\StageR12\startCD\Disk1\rapidwiz > echo off
  / cygdrive/c/Windows/system32/cmd
  order «»who is available.
  "gnumake" is not available.
  ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
  who: no gnumake in (/ usr/bin: / cygdrive/c/WINDOWS: / cygdrive/c/WINDOWS/system32)
  
  RW-50011: error:-the availability of utility systems test returned an error: 1
  
  =============================================================================================
  
  While I installed Cygwin, correctly and completely, in C:\cygwin. I saw some threads here who advised me to set the environment variable correctly, so I added "C:\cygwin" my path variable...
  
  The message says "who is available, while"gnumake"is not"... I wanted to find gnumake.exe under C:\cygwin\bin so that I could move it to the C:\...\system32 folder, but I can't find it there... Am I supposed to?
  
  Any help will be highly appreciated because I'm stuck on this issue for a long time now... Thanks in advance.
  
  Aravinda

  Salvation;

  Please check:

  Re: RW-50011: error:-the availability of utility systems test returned an error

  Respect of
  HELIOS

• Executing new installation of windows 7 in bootcamp on new macbook pro. Microsoft Updates do not install KB973688 and KB954430

  There were 4 updates running, one was successful, three failed.  Tried to run several times with the same results.

  without success... Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)
  without success... Update of security for Microsoft XML Core Services 4.0 Service Pack (KB954430)
  without success... Microsoft Suite Service Pack 1 (SP1)
  success... Removable tool of Windows malware - January 2010 (KB890830)

  Hello

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

  This should solve the problem, give it a try and check if you are able to perform windows updates.

  If that does not help and uninstall the updates manually and then download the updates and install then one by one.

  Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=00bcdf28-2299-4150-964d-88a601e25229&displaylang=en

  Update of security for Microsoft XML Core Services 4.0 Service Pack (KB954430)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=96a4413c-5261-4f69-83d0-932c430abd14&displaylang=en

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help please with the new installation of windows 7 with internet

  We have two laptops, both using Windows 7 and a hub BT wireless, everything works fine, until I decided to reinstall windows. Now, with this computer, I just haven't been able to connect to the internet, even if the other laptop works very well. I'm no computer whizz and so enjoy really simple instructions on how I can connect to our BT Hub (internet).

  You will need to install your wireless adapter and Ethernet driver.

  Visit the Web site of the manufacturer for your laptop.

  Is which laptop brand and model?

• Installation of Windows 8 with SSD

  My computer crashed and I reinstalled Windows 8, but the disk partition that is created is then very unhappy: Windows and all other programs are installed on my SSD, it is completely filled. Can I fix this without having to re - reinstall Windows? Can I move windows normal hard disk parts? Or if I have to reinstall Windows, what should I do what disc use optimal?

  Hello

  To start... what type of installation media that you are using?

  Is this a real Win 8 installation DVD, or is it a disc that you created to restore the factory machine, or even a drive you've purchased from the manufacturer of the computer?

  It makes a difference as to how the process works...

  If you use a disc of 8 Win, you should be able to do a CUSTOM INSTALLATION, and then choose the location.

  If you use the manufacturers pre-install discs, you probably have the opportunity to...

  Whatever it is, you should probably hook an SSD... Also delete EVERYTHING on the HARD drive...

  If you are not using a Flash drive install, I think you need to upgrade the BIOS to the legacy...

  There seems to be a way to use THE installation DVD, but I do not think that a standard, it will work...

  This link can be useful... It also contains a link to the instructions to create a disk for Installation of Flash...

  http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows-8-a.html

• I have an imac (late 2012). I have to install windows 7 with Bootcamp. Please give me instruction to installing windows 7

  It asks me for the ISO file and mountain lion drive which is not included. Please give me instruction to do so.

  Thank you

  Mountain Lion does not come on a disc, it is provided through the App Store, you must upgrade to 10.8.4.

  You can download it at the following link

  http://support.Apple.com/kb/DL1658

  Buying Windows 7 Home Premium, it need to check everywhere where computers and software are sold in your area. If you get a copy, you can simply download the. ISO proposals of links and use the product key.

  Please note that you will need a USB along which the Boot Camp Assistant will use to create a bootable Windows 7 as well as the drivers needed to install on your Mac.

• How can I install Windows XP with my USB?

  I tried to install winxp with my USB. I used to copy the contents of the cd to my USB software wintoflash. then I tried to install the operating system. It has worked well. It shows the instructions as "1 text mode setup 2nd gui mode setup + 1 start windows" it's education that I got. and installed the operating system. According to the guidelines I tried and installed the operating system, after I've changed the first boot device as my local disk and I got the error msg "error loading operating system". then I changed the boot sequence to my USB stick, by doin so my laptop works very well. but without the USB, it says error. I can't find where I have error. (my laptop starts only with the USB key)

  original title: installation of Windows XP with a USB key.

  Hi Arjun Mcs,

  ·         What happens when you change back to normal boot sequence?

  ·         Are you able to see the files in the USB key?

  Answer with the information required to help more.

• How can I install Windows Xp with Windows Vista?

  INSTALLATION OF WINDOWS XP WITH WINDOWS VISTA?

  I HAVE WINDOW VISTA HOME PREMIUM 32-BIT IN MY SYSTEM, BUT SOME OF MY SOFTWARE IMPORTANT DO NOT INSTALL VISTA SO I TRY TO INSTALL WINDOWS XP WITH VISTA BUT IT DOES NOT WORK.
  AFTER AWHILE, I SEE THE TYPE OF HARD DRIVE IN MY SYSTEM IT IS AHCI IN THE CASE OF VISTA, WHEN I CHANGE TO THE SECOND IDE TYPE THEN XP IS INSTALLED AND WORKING BUT VISTA IS DEAD AND WHEN I CHANGE TO NEW TYPE OF DISC TO AHCI THEN VISTA THROUGH REPAIR AND BECOME WORK VERY WELL , BUT DESTROYED XP.
  BOTH THE WINDOW WORKS ON DIFFERENT DISC TYPE AND WHENEVER THE DISC TYPE CHANGE, IT WILL TAKE VERY LONG TIME TO FIX THE WINDOW.
  IT BECOMES IRRITATING.
  WHY I CAN'T USE THE WINDOW AT THE SAME TIME?
  SO PLEASE GIVE ME THE GUIDE-LINE STEP BY STEP HOW INSTALL WINDOW XP WITH VISTA?

  Hi AbidAman,

  I suggest to check the following items and check.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

   

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

   

  Install multiple operating systems (multiboot)

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-more-than-one-operating-system-multiboot

   

  Set up a dual-boot system

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-dual-boot-system-from-Windows-Vista-inside-out

  Hope this information helps.

• OSXRESERVED do not deleted after installing Windows with Bootcamp

  I installed Windows 8.1 and upgrade to Windows using Boot Camp 10.

  I think that the normal procedure for installation (instructions Apple) should be:

  -Boot Camp will partition the original HDD system to:

  -Partition OS x 'reduced '.

  -OSXRESERVED partition to save all the installation Windows 8.1 or CD ISO.

  -TRAINING camp of hard drive where the final installation of Windows will be.

  -Once installation is complete (it took about 5 hours!) so it should be reconfigured by boot camp would exist only two partitions:

  -Partition OS x 'reduced '.

  -BOOTCAMP with Windows OS HARD drive.

  But I still 3 partittions in my MAC PRO END of 2013: OSX, OSXRESERVED and BOOTCAMP.

  So now, when I boot my MAC PRO instead of see 2 possibilities of OS (OS x and WINDOWS) I see three possibilities (OSX, WINDOWS, and WINDOWS again), and the third possibility is wrong, it will show the original installation Boot CDROM instead of Windows 8.1

  I hope that I have explained clearly (...).

  Second part of the problem: I want to use VMWARE FUSION and configure it to use the Bootcamp partition as a virtual machine (YES, with the MERGER it is possible to use as virtual bootcamp, then you can start your Machine Windows within the MAC, or boot from the beginning). The problem is that the MERGER will detect the OSXRESERVED partition, but not the BOOTCAMP partition... So I can't get it to work until I have the first problem...

  Would you please be so kind as to help (I would like someone to really expert Apple could give a solution).

  Best regards

  Francesc

  1. you can remove OSXRESERVED manually using disk utility.

  2 VMWare seems unable to distinguish between the installer and install BC. Once you delete OSXRESERVED, it should work fine.

• Cannot install Windows with BootCamp

  Hi guys!

  I have a Macbook Pro 15ich Early 2011 Intel Core i7 2 GHz 16 GB RAM disk 'Captain' with dual operating system, Samsung SSD 840 EVO drive, and HARD drive that came with the laptop is my auxiliary drive.

  I have two problems.

  (1) when I want to make the Boot Camp partition, I opened the app, and I do Boot Camp with the DVD options, I don ' t have the possibility of USB, I try to edit the info.plist is the administrator and I n ' have permission, I lost the permission when I arrived at the happy record.

  (2) I can't do the Boot Camp with USB I did a DVD with an external DVD drive. I can make the partition, but my problem comes when my Mac reboots to install W7 and W8 and typical black screen of MSDOS with the underscore "_" appears flashes all the time. I waited for minutes, hours, day and the laptop do not respond.

  What can I do?

  Kind regards
  Alex.

  riiKu wrote:

  (2) I can't do the Boot Camp with USB I did a DVD with an external DVD drive. I can make the partition, but my problem comes when my Mac reboots to install W7 and W8 and typical black screen of MSDOS with the underscore "_" appears flashes all the time. I waited for minutes, hours, day and the laptop do not respond.

  What can I do?

  Kind regards
  Alex.

  During the installation of Windows Setup started and you have the screen which shows your partitions and to choose one, you choose your Bootcamp partition and click on Format of below the list of partitions? You must leave the configuration format the Bootcamp in NTFS partition before installing Windows actually.

• Bootcamp: Installation of Windows 10 USB cannot find bootcamp partition

  Hello

  I deleted the old partition 10 windows using bootcamp, upgrade of the space itself.

  I ran BootCamp again to set up windows 10 pro, as I had already installed on my end 2012 21.5 "iMac and the wizard successfully install on a USB stick, my Windows 10 ISO and any software downloaded from Apple.

  After restarting, start the configuration of Windows 10 until the selection of the partition.

  I, as the statement says, choose partition, BOOTCAMP and Format. Then I click Next, but the Windows says:

  "I can't create or find a partition...". »

  So I can't install it... What is going on? How can I fix this as never before appeared?

  Thank you

  Disconnect the external storage, perform the following two procedures and then only connect the USB Flash drive containing the installer W10.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .