Having problems connecting HP Laser Jet P3005Device

Similar Questions

• Laser Jet 4100N: direct connection of Laser Jet 4100N using a crossover cable CAT5/6

  Hello

  I want to connect my Laser Jet 4100N directly to my laptop which only has USB and LAN ports.

  The printer has a parallel port and a LAN port.

  I have access to WiFi internet, the modem is located in another room.

  I have a CAT 5/6 connecting cable.

  I get the 192.168.1.8 IPv4 address for my computer by typing IPCONFIG at the command prompt.

  I connected the crossover between my laptop and the printer cable.

  Turn on the printer lit up an indicator on the LAN port on the printer.

  In the menu devices & printers, I added a new option of "using TCP/IP" printer and 192.168.1.8 provided IP address.

  The computer search TCP/IP but end in nothing.

  Please help me to communicate with the printer.

  Thank you.

  You try to use your wireless PC address to print with a wired device.

  Your PC has two network adapters, they are not in fact cards, they are integrated into the motherboard and but I will refer to them as cards for simplicity, or I could call ports.

  When you find the IP address of your PC you are probably finding an IP address wireless, but since you're wired card has never been configured statically and is not connected to a network there is no ip address.

  What I would do would be statically configure the IP address of the port wired on your PC, & I would something like 192. 168 2. 2, with a default gateway of 192. 168 2. 10, & a subnet mask of 255. 255 255. 0 and don't worry because you do not connect you to the largest network on the DNS servers. Then I go to the printer and change the network settings and give it a 192 IP address. 168 2. 10 and its default gateway I would set it to 192. 168 2. 2 and the subnet mask would be the same that you set on the PC.

  Regarding the process of search for the cable network on your PC etting sand information in map, I think you need to do some research of the internet based on your operating system. I mean version of Windows operating system. Windows 7 would be different from Windows 8 in perhaps a few minor details.

  The reason why I change that a number from 1 to a game in your IP address is that it puts the port wired into a network separate from the wireless port, in my view, that will keep your PC of confusion as to which port uses to communicate with the printer.

  And back to another part of the discussion, the default gateway of a network printer on a small network is often on the IP address of the printer because the printer has never try to connect to what outside the network, but in your case, we want to put the IP address of your PC wired port to ensure that When the preacher looking for information, outside of himself, he sends will go to your PC.

  If you find my post helpful please give me a few laurels by clicking the thumb upward under the post. The number of congratulations I helps to establish my credibility on the forums. If my information solves your problem then click on please accept it as a Solution button located under the point of sale, when messages are marked as being solutions which help other people decide that they are large enough to read when they have a similar problem.

• Laptop started having problems connecting to internet connections Wi - Fi

  in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.

  Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.

  Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.

  Thanks in advance

  > in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
  Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
  It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings.

• Did someone having problems connecting to the functionality of adobe currently shipping?

  Did someone having problems connecting to the functionality of adobe currently shipping?

  Finally got the link: https://cloud.acrobat.com/send

• Problem with HP Laser Jet 5550 HDN

  Hello

  My printer (HP Laser Jet 5550 HDN) print a black line "BOLD" instead of text when you print a pdf document.

  Operating systems Windows 7, Adobe Reader XI

  Could someone please help?

  Thank you

  I was watching a few just referb cartridges today.  I had two in my hand and spoke to another technician who said that society referb clean very important he should which is deep inside.  I tried to google your exact cartridge to make sure that I was looking at a similar to yours and I couldn't not all the images out of the box, so I'll just describe what I saw and can let me know if yours does not:

  So I had this little 'flap' on the bottom of the toner cartridge and when I pull it slightly back and forth, I see the drum.  It is what can be easily replaced (by buying a new toner) If you see what looks like one white line - in other words damaged.  By just trying a new or used cartridge, you can solve the problem.  Although the referb may have a new drum in there, we're components deeper inside, which could cause problems like that, but to answer your question directly... eh, I doubt it, but you get about 60/40 chance of getting a good or bad toner when you get a refurbished.

  Research on the age of your printer, it's probably just some general maintenance reason so if you get a new toner and you you have the line again, look at my link and in this list, you will see a merger that's going to be the next thing I would check.  Pretty easy to change I guess.  I hope that answers your question.

• at & t u-verse, & having problems connecting my Officejet 4500 to my current wireless network

  Hello

  I just got an Officejet 4500, and I am unable to connect it to my current wireless network.  I'm AT & T U-Verse so I use 2Wire equipment.  I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8.  When I try to connect, I get an error message saying something like "Failed to connect."

  In the past, I had problems connecting my Airport Express to 2Wire.  In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES).  My Airport Express was able to connect without any problems.

  Please help me to connect my Officejet 4500 to my 2Wire router.  I note also that I'm not really tech savvy so I need instructions are written in simple terms.

  Thank you in advance for your help!

  Marc-Antoine

  Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network

  I hope this will get back you on track!

  -Sean

• having problems connecting to some websites with spa3102

  Hello

  I have problems connecting to some websites with spa 3102.

  The error message I get is as follows.

  The connection was reset

  The connection to the server was reset while the page is loading.

  * The site may be temporarily unavailable or too busy. Try again in a few
  moments.

  * If you are unable to load any pages, check your computer's network
  connection.

  * If your computer or network is protected by a firewall or proxy, make sure that
  that Firefox is permitted to access the Web.

  When I connect to my ISP modem directrly, so I'm able to connect to these Web sites.

  Any ideas?

  I already had the latest firmware (software Version: 5.1.10 (GW))

  But I think the problem is now resolved. Sites that I couldn't visit were my suppliers Web hosting and my own domain. Previously, I had activated attacking and that my hoster somehow registeren my mac address.

  Here are the settings that I had to change the spa3102.

  MAC Clone settings
  The Service Enable MAC Clone: Yes cloned MAC address: xxxxxxxxxxxx

  thx for your help.

• Having problems connecting to the Internet

  Hello, one and all!

  So, as of late I had problems connecting to Internet.  I can connect to the connection itself very well, although it shows as "Limited".  The thing that bothers me the most is that this problem is intermittent: some days, it appears, some days I have no problem with the connection to the Internet.
  I have tried all the following:
  -Reset the wireless network adapter
  -Contact network administrator (the link in question is a WiFi connection library; I'm the only one to have this problem, is not the connection itself)
  -Enabled Windows Update for updates and install them
  -Reset my computer
  At one point, I was getting an error message that says "Windows cannot communicate with the device or resource (primary DNS server).  I took measures to fix that (checked the option 'DNS server automatically get an address' under the screen properties V.4 IP (TCP/IPv4)), and now it's just going back to tell me that the error is with the network (which is not the case) or the wireless adapter (which I find more likely).
  I was wondering if anyone had any advice.  I have not yet checked to see if my computer can connect to the Internet via another connection, but I imagine that if it is a wireless network card problem, I have this same problem also.
  My computer is an HP laptop that I bought in January 2013, and it came with Windows 8 is installed.  I had previous problems with the Internet, but in the end, these problems have been resolved with a driver update through Windows Update.  There is no such update now, however.
  EDIT: I just tried another diagnosis with the troubleshooting tool, and it gives me the "Windows cannot communicate with the device or resource (primary DNS server)' once more.  I still have the "DNS server automatically get an address" option checked.

  Hi Jason,

  This problem can occur because of corrupted network, TCP\IP drivers, or due to the damaged network card.

  Method 1:
  I suggest you to check if the problem occurs with a connection cable or not.

  Method 2:

  If the problem persists, I suggest you install the latest network driver on the manufacturer's Web site and check if it helps.

  The link: http://WWW8.HP.com/us/en/support.html 

  Method 3:

  If the problem persists, I suggest you to reset TCP/IP and check if it helps.

  a. press the Windows key + X, select prompt (Admin) and on ENTER.

  b. at the command prompt, type the following command, and then press on ENTRY:

  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  See the links for more information.

  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Remote Desktop having problems connecting Surface RT to Win 8 portable Pro (new installation)

  Remote Desktop/RemoteApp problems

  I was not able to connect outside of the network.

  I sprung several days trying to solve this problem by myself, then on the phone with Microsoft productivity, and some of them aren't yet familiar with Surface RT. So with the RD in network connection is quite simple and effective, I hope some people here can confirm that they have the same problems or possible solutions.

  As I see it, there are 3 interfaces where we can connect to RD on the Surface RT: Pre-installe Remote Desktop Office found via scanning and research, the metro downloadable RemoteApp and desktop remotely via the control panel).

  I see where ping command is executed on the computer and port 3389 is open and oriented to the laptop, so I will state the problems I see with each when I try to log on a Windows 8:

  (1) pre-installed RD:
  

  It's great and the name of your computer is there for you and connected to your account and network ready. You have options like "Connect and don't warn me if server authentication fails" I think has helped many people on Windows Server with certificate problems.

  Off-grid on Surface RT, however, you get «Remote desktop cannot find the computer _.» This may mean that '_' does not belong to the specified network. Check the computer name and the domain you are trying to connect to."

  (2) metro UI:

  
  

  It seems to do a ping the computer more quickly when you put: 3389 at the end of your IP address. However, no success after having tried with and without the end of the port. The messages I get are...

  RemoteApp 3):

  

  This is the solution I've seen in most tutorials,... but the reason given for not connecting, it is "the remote computer cannot be authenticated due to problems with its security certificate."

  Instead of the option to bypass (which option 1 gives you), there is no other choice, and he says "Windows is unable to continue setting up this connection. Contact the administrator of your workplace. »

  This message made me to learn more about the certificates that I always wanted to know. I tried to start MMC and ensuring that the cert listed in Remote Desktop has been copied to the folders of the confidence of the authorities certificate root (duplex as certificates on the local computer). I tried different combinations and did not really anywhere.

  If someone connects via #3, please post care on your certificate if you can find it.

  Any help on getting one of these methods to work is appreciated. It puts naked repeat that port 3389 is listed as open on my home network, the traffic is transferred to the correct PC and all firewalls are disabled until I can solve this problem.

  Hello

  Sorry for the delay in responding.

  Assistance in connection with Remote Desktop problems are handled by technicians of the TechNet Forums.

  If you are also facing problems with remote desktop on the computer Windows 7, then please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Having problems connecting iPhone 6s for iMac with OS Lion

  Hi all.

  I have an iPhone 6s and a mid-2011 iMac that is still running on OS Lion. When I connect my iPhone, I get the message "the iPhone is useless because it requires a newer version of iTunes." So I checked that, and I am running the latest version. When I open iTunes, I do not see my camera, and all the menu options of synchronization are gray.

  We were reluctant to upgrade to El Capitan because of negative comments about iPhoto (specifically, how the upgrade removes all events that we named so laboriously since we bought the iMac). We just bought more RAM for our machine (which can contain 16; we currently have 4 and we'll be adding more 8) due to the frequent occurrence of the rotation color wheel.

  Any ideas on the cause of the iTunes/iPhone/iMac problem or how to fix it?

  Thank you!

  You are running the latest version of iTunes that your Mac can run on your current OS X, however, is not the latest version of iTunes. 12.2.x is required for synchronization with any device running iOS 9. It is iOS that requires the latest version of iTunes, not the type of device.

  Sorry, but you need to update your OS X in order to be able to download the latest version of iTunes, which is 12.3.2.35

  Sorry

  GB

• Having problems connecting to my router wirelessly with Equium L350

  I can't find anything on my laptop to connect to a wireless Internet device, please help!

  How do you mean that you can't find anything on your computer to connect to a wireless device? You must activate the wireless card by sliding the switch to the right. In addition, you can activate the card wireless via the keycombination 'FN + F8'.

  A better description of your problem would be more useful. :)

  Welcome them

• Having problem connecting to OR-9188

  Hello

  I'm not able to establish the connection between the chassis NOR-9188 and my Windows 7 laptop.

  My firewall is disabled.

  I have expolrer Automation.

  Please suggest what to check.

  Thank you

  Prashant

  Hey Prashant.

  I see at least two things that can give you problems.

  First, the fact that you have no IP address either and that some fields (IP address and the subnet mask) seems to point to some kind of breach of your NETWORK adapter driver or the Windows settings.  If you go to control panel > network and sharing > advanced settings of the adapter (names may be a little different since I have listed memory), you should be able to adjust the settings for your adapter IPv4 TCP/IP.  Set to automatically acquire an address and restart to see if things improve.  If not, you may need to resolve more as to why this interface seems to be non-functional.  If plug you it into a router, switch or LAN modem, you are able to login and see better results?

  The other thing I noticed is that you have VMWare adapters configured tunneling.  I think that the first paragraph in my post is more important, because those issues will be insurmountable if your network interface is not functional, but once you have passed this point, you could have problems of routing/confusion on your system with these adapters in VMWare.  If you do not need these cards, you should consider turning off to avoid any problems.  This NEITHER KB has a few other useful troubleshooting suggestions, as well.

• Problem scanner HP Laser jet 3380

  Hello

  One of our clients have 2 x HP Laserjet 3380 all in one printer/scanner.  The printers are connected locally to each pc via usb and then shared & recorded windows sbs R2 so that everyone can access.  Everyone can print without problem, but the scanner does not work.  I tried to reinstall the most recent drivers several times and have even installed a few scan fix softare to your Web site, but unfortunately no printer allow the use of scanners out there.

  Please can you tell me if there is a solution to this problem?

  Thank you

  Please close as no response

• Having problems connecting to WiFi. It says Windows cannot find certificate to log network

  I am trying to connect to our wifi at home using Netgear N600. I get this message when you try to open a session. It worked before, but our laptop was recently reset.

  Thanks for your help

  Hello AntDre

  It seems that the question you face to either because of incorrect security settings. The link below will help you solve the problem. Find the message by Jeff Liebermann. This is the second down. I hope this helps.
  Windows could not find a certificate to connect to the network.

• Having problems connecting to my cellphone samsung sch-u370 to my laptop windows Vista dell Insp 1750

  Windows does not recognize bluetooth devices

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not resolve this contact the mobile phone manufacturer