Having problems with the resolution of the screen from the 1st upgrade.

Similar Questions

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• having problems with the pop-up windows of analytical Google all of a sudden and now the pages are crashing or being redirected

  original title: google analytics popups

  Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?

  Hi NicolaaTC,

  See the links below and check if it works.

  What is the browser hijacking?

  http://www.Microsoft.com/protect/terms/hijacking.aspx

   

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  Hello

  1. The issue is only with MSN mail?
  2. Have you tried using another web browser and check if you are faced with a similar question?

  Given that the problem is related to MSN I suggest you to contact MSN support for assistance.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  Check also:

  https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Hope this information is useful.

• Is anyone having problems with the last lR? I can't do to apply effects to develop at all. I have to force to leave whenever I try to use it.

  Is anyone having problems with the last LR?

  I can't do the effects to apply to develop and I have to force to leave whenever I try to use it.

  I have absolutely nothing accomplished recently - it has worked so well.

  I created enough space on my hard drive thinking that this might be a cause of slow operation but he has not made the difference...

  Hi GKVsiuals,

  suggest make you in Lightroom preferences > performance > uncheck 'use graphics processor' and restart Lightroom to check again.

• Is anyone else having problems with the crop tool in LR6.

  Is anyone else having problems with the crop tool in LR6.
  My PC crashes sometimes when I use the crop tool in LR6. It seems fairly random, and I never had this problem in LR5.

  Have you tried to disable the GPU acceleration in Lightroom preferences?

• Anyone having problems with the GENERATED_KEY in CF8 lately?

  Anyone else have problems with the GENERATED_KEY value returned by a cfquery when using ColdFusion 8 and MySQL?
  
  I'm inserting records in a MySQL 5.0 DB and then enter the result. GENERATED_KEY and assigning my ID of objects field. Nothing spectacular here.
  
  In my test harness, everything works fine but when I download files to my host I get this error;
  An error has occurred at the request:
  Error code: Server.Processing
  Details of the fault:
  Error string: cannot call CFC - element GENERATED_KEY is undefined in QCREATERESULT.
  
  I thought that there must be a bug I introduced so I check my code and ensured that it worked on my system and Uploaded the cfc again just to be sure there was nothing broken in transit.
  
  Always had problems.
  
  So, I checked the Web and found that the MySQL Connector/J version 5.1.5 has a problem with that. I contacted my provide my Site host and has asked to check the environment that I was for me.
  
  I was told it is ColdFusion 8 (as it should be.)
  
  At the beginning when I asked what version of Connector/J server on that I had used on me version 3.51. This is not a version of connector for all those of you who did not have to deal with it. (At least one that would have shipped with CF8.) That sounded more like the version of the MySQL server, but I was supposed to be on a 5.0 Server and my account information specify also the same, so I let this drop for now.
  
  After having to explain how to find a way to know what the version of the connector was attached their support they told me that it was 5.05 (has happened to the version that I already told him was the version I thought comes with CF8, if I'm wrong.)
  
  And I asked him to confirm that the DB was version 5.0.
  
  So assuming that told me the truth. I can't find a reason why the GENERATED_KEY are not returned.
  
  My CFQuery insert code looks like this;
  
  < cffunction name = "crΘer" output = "false" access = "private" returntype = 'Cancel' >
  < cfset var qCreate = "" >
  
  < cfset var local1 = Field1 () >
  < cfset var local2 = Field2 () >
  < cfset var local3 = Field3 () >
  < cfset var local4 = Field4 () >
  < cfset var local5 = Field5 () >
  < cfset var local6 = Field6 () >
  < cfset var local7 = Field7 () >
  < cfset var local8 = Field8 () >
  
  < cftransaction isolation = "read_committed" >
  < cfquery name = "qCreate" datasource = "datasource" username = "userName" password = "password" result = "qCreateResult" >
  Insert into myTable (Field1, Field2, Field3, Field4, sphere5, case Field6, Field7, Field8)
  values)
  < cfqueryparam value = "" #local1 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  < cfqueryparam value = "" #local2 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  < cfqueryparam value = "" #local3 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  "< cfqueryparam value =" "#local4 #" cfsqltype = "CF_SQL_INTEGER" = null "#iif ((local4 eq""), ("yes"), ("No.")) #" / >.
  < cfqueryparam value = "" # locale5 # "cfsqltype ="cf_sql_integer"/ >,"
  < cfqueryparam value = "" #local6 # "cfsqltype ="cf_sql_integer"/ >,"
  < cfqueryparam value = "" #local7 # "cfsqltype ="cf_sql_varchar"/ >,"
  < cfqueryparam value = "" # locale8 # "cfsqltype ="cf_sql_integer"/ >"
  )
  < / cfquery >
  < / cftransaction >
  < cfset variables.objectID = qCreateResult.GENERATED_KEY >
  < / cffunction >
  
  [No I am not really using Field1, 2, 3 in my code and my password is not actually password, but you get the point].
  
  Again, this works in my lab. (CF8, MySQL 5.0, Apache, standard Connector/j) That is what it is?
  
  Personally, I think that my environment is not what it was supposed to be regardless of what I was told. The rep that I was talking doesn't seem to know much about ColdFusion and at the end of the conversation, he said as well and opened a ticket. Not very useful, but at least not rude.
  
  However, I want to be fair and check all the possibilities. If you see something wrong with my Code let me know that I'm rather crazy eyes will then return to writing queries to get the id.
  
  Thanks in advance!
  
  -Joe
  
  PS: Just before posting this I tried to add < cfset var qCreateQuery = "" / > to the list of the variables just to see if it would change what anyone and it doesn't work. " Still works on my system, but not on them.

  Found the problem.
  The environment has been set up correctly, but the DSN apparently obtained the value a MySQL 3.51 Driver to the administrator.
  It's something that my hosting service, I have no control on however I also don't even think about asking them to check for me either. I forgot that CF has even a version 3 driver for MySQL.

  So my hats off to HostMySite technicians who concluded that, for me and for anyone having the same problem, I suggest you also check the same.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• having problems with the trash icon - documents are not deleted when deleting

  original title: problems with the trash icon

  I DELETED THE ICON TO THE TRASH BY ACCESS WHEN I PUT NOW THE TRASH DOESN'T DESSAPEAR WHEN ITS EMPTY

  Hello

  How to restore the Recycle Bin on the desktop under Vista
  http://www.Vistax64.com/tutorials/168608-Recycle-Bin-restore.html

  Hope this helps

• IPhone update (but an old having problems with the screen Activate iPhone and Apple ID)

  I have an iPhone 5 that, by chance (Pocket escaped), is stuck on the screen of the iPhone 'Find your phone' Activate.  The iPhone does not accept my Apple ID.  He is looking for an address icloud.com.  I can't honestly remember a set up, and I tried a number of variations on the icloud.com address (using the 'index' system provides) and passwords with no luck.  Do not have any problems with my Apple ID - I can see my phone & details on my screen of the user, when I connect my account (via the office).  Subject to my cellular service provider, I tried to force a restore on the phone via iTunes, but after that he asked me a few questions of initial Setup, I'm just at the "Activate iPhone" screen

  To be honest, I was going to pick up a new phone this week anyway.  My concern is now that I don't want to not suddenly faced with the same problem.  This lock, I meet - is - this quite specific for the phone itself? If I get a 6 plus and use this Apple ID to activate it, I ask in trouble? I admit that I am a twit when it comes to activation codes, the Apple ID, SIM cards and others.

  It was my first smartphone (+ 3 years now) and the installer was made by my employer, so strange things could happen at the beginning.

  Thank you all for any help

  If the implementation was made by your employer, they can put in something different from your Apple ID to find my iPhone. It also seems that if something was damaged in the fall. Who can contribute to the problem.

  If, when you receive your new phone, you make sure you use your Apple ID to find my iPhone, you should have no problem.

• Is anyone having problems with the Times and the Sunday Times App

  Im having problems loading from the Times and the Sunday Times app. Before I launch into a major description (I have Parkinson's disease, and typing is slow) is there a known issue with the application at the present time

  There has been a lot of problems with this app as soon as they have a clear, the other seems to appear.    Take a look at this link and it followed in areas where you are affected by.

  http://www.thesundaytimes.co.UK/Sto/multimedia/archive/00258/Helpguide_stripped _ _258975a.pdf

• having problems with the installation of the operating system, updates and other disk after the installation of the new HD

  After you have installed the new HD, loading of BONES, but having trouble installing microsoft service Pack 1, but several other updates. Following the troubleshooting steps don't provide any assistance. can not load the disc to sound blaster. was originally on my system, just try to reinstall and I get a window telling me that I need to install my audio drivers first? Also experienced a few freeze ups today, would not respond to any action or orders, including the power button. Finally removed a/c and battery adapter pulled to do stop and restarted. Then he does a disk check, and then goes back to almost normal. almost, because it is not quite the same computer a few days ago. I have a dell Inspiron 1720, I am not at all computer savvy and I am very frustrated... Please help me!

  Hi Art,

  Thank you for your message.

  Here is some information about drivers and their update:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  "I went to the dell support site and downloaded what was in the audio position who has not solved my problem here either.

  What did you do with the file downloaded from the Dell support site? You double-click the file to run it?

  What version of the Soundblaster device you are trying to install? Some Soundblaster cards are not compatible with Vista.

  What do you mean by: "it's not quite the same computer a few days ago"

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Having problems with the deletion of an addEventListener

  Greetings from Adobe community,

  IM currently having a problem with my flash assignment,

  I have a: this.addEventListener (Event.ENTER_FRAME, onPanSpace);

  who is causing errors when I go to the next section:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at::mc2_3/onPanSpace() [Confabulation_fla.mc2_3::frame1:13] Confabulation_fla

  I would like to delete this addEventListener when I go to the next section (which is by clicking on a door), but to be honest, I have no idea how.

  So I ask "How can I remove this on my next frame addEventListener?

  Kind regards

  Notnao

  use:

  deur1.buttonMode = true;

  deur1.addEventListener (MouseEvent.CLICK, deurS1);

  function deurS1 (e:MouseEvent): void

  {

  MovieClip (root) .gotoAndPlay (3);

  parent.removeEventListener (Event.ENTER_FRAMEMovieClip (parent) .panSpace);

  }

• After the upgrade to El Capitan having problems with the application Mail

  Hello:

  Recently upgraded my Mac mini to El Capitan. Before the upgrade (from Mountain Lion), I got Thunderbird mail application works perfectly access my GMail account and my Hotmail account. Now, I have no problem with Hotmail and Gmail keeps asking for the password to connect to the gmail imap server. I have TBird in my laptop Ubuntu Linux and Windows too and that you have not had any problems like that. Any help to solve this problem is appreciated. Thank you.

  Try this: https://support.google.com/accounts/troubleshooter/3178296?hl=en