having problems with the trash icon - documents are not deleted when deleting

Similar Questions

• Anyone else having problems with the payment information section does not load?

  Im trying to put in my payment information in and it will not appear. don't think its connection. I have tried everywhere

  Try a few steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• having problems with the pop-up windows of analytical Google all of a sudden and now the pages are crashing or being redirected

  original title: google analytics popups

  Ive been having problems with the Google analytic pop-up windows all of a sudden now pages break or redirected, I've ran Malware, Windows Defender, a direct care, Avira, Avast and F-secure, and nothing seems to have read on other forums to help, that his may be a Trojan horse: Trojan.osx.Dnschanger.B... ive also rebooted my router as suggested in some forums , but nothing seems to help?

  Hi NicolaaTC,

  See the links below and check if it works.

  What is the browser hijacking?

  http://www.Microsoft.com/protect/terms/hijacking.aspx

   

  Difficulty of your web browser hijacked

  http://www.Microsoft.com/security/spyware/browserhijacking.aspx

• Problem with the desktop icons

  I have the problem with the desktop icons... they come from both sides... one above the task bar and on the other hand under the task bar too... I'm unable to remove those who are below the taskbar.

  Hello

  You can try following the steps provided below and check if this can help, make sure that closing all open programs:

  (a) the Task Manager open by right-clicking on the taskbar

  (b) in the process tab, right-click on "explorer.exe" and complete the process

  (c) screen will be blank, except for the Task Manager.

  (d) open the file - new task (run)

  (e) enter "explorer.exe" click OK.

  If the problem persists, try to create a new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  See also: http://windows.microsoft.com/en-us/windows-vista/fix-a-corrupted-user-profile

  Hope this helps,

• anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  Hello

  1. The issue is only with MSN mail?
  2. Have you tried using another web browser and check if you are faced with a similar question?

  Given that the problem is related to MSN I suggest you to contact MSN support for assistance.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  Check also:

  https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Hope this information is useful.

• Anyone having problems with the GENERATED_KEY in CF8 lately?

  Anyone else have problems with the GENERATED_KEY value returned by a cfquery when using ColdFusion 8 and MySQL?
  
  I'm inserting records in a MySQL 5.0 DB and then enter the result. GENERATED_KEY and assigning my ID of objects field. Nothing spectacular here.
  
  In my test harness, everything works fine but when I download files to my host I get this error;
  An error has occurred at the request:
  Error code: Server.Processing
  Details of the fault:
  Error string: cannot call CFC - element GENERATED_KEY is undefined in QCREATERESULT.
  
  I thought that there must be a bug I introduced so I check my code and ensured that it worked on my system and Uploaded the cfc again just to be sure there was nothing broken in transit.
  
  Always had problems.
  
  So, I checked the Web and found that the MySQL Connector/J version 5.1.5 has a problem with that. I contacted my provide my Site host and has asked to check the environment that I was for me.
  
  I was told it is ColdFusion 8 (as it should be.)
  
  At the beginning when I asked what version of Connector/J server on that I had used on me version 3.51. This is not a version of connector for all those of you who did not have to deal with it. (At least one that would have shipped with CF8.) That sounded more like the version of the MySQL server, but I was supposed to be on a 5.0 Server and my account information specify also the same, so I let this drop for now.
  
  After having to explain how to find a way to know what the version of the connector was attached their support they told me that it was 5.05 (has happened to the version that I already told him was the version I thought comes with CF8, if I'm wrong.)
  
  And I asked him to confirm that the DB was version 5.0.
  
  So assuming that told me the truth. I can't find a reason why the GENERATED_KEY are not returned.
  
  My CFQuery insert code looks like this;
  
  < cffunction name = "crΘer" output = "false" access = "private" returntype = 'Cancel' >
  < cfset var qCreate = "" >
  
  < cfset var local1 = Field1 () >
  < cfset var local2 = Field2 () >
  < cfset var local3 = Field3 () >
  < cfset var local4 = Field4 () >
  < cfset var local5 = Field5 () >
  < cfset var local6 = Field6 () >
  < cfset var local7 = Field7 () >
  < cfset var local8 = Field8 () >
  
  < cftransaction isolation = "read_committed" >
  < cfquery name = "qCreate" datasource = "datasource" username = "userName" password = "password" result = "qCreateResult" >
  Insert into myTable (Field1, Field2, Field3, Field4, sphere5, case Field6, Field7, Field8)
  values)
  < cfqueryparam value = "" #local1 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  < cfqueryparam value = "" #local2 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  < cfqueryparam value = "" #local3 # "cfsqltype ="CF_SQL_VARCHAR"/ >,"
  "< cfqueryparam value =" "#local4 #" cfsqltype = "CF_SQL_INTEGER" = null "#iif ((local4 eq""), ("yes"), ("No.")) #" / >.
  < cfqueryparam value = "" # locale5 # "cfsqltype ="cf_sql_integer"/ >,"
  < cfqueryparam value = "" #local6 # "cfsqltype ="cf_sql_integer"/ >,"
  < cfqueryparam value = "" #local7 # "cfsqltype ="cf_sql_varchar"/ >,"
  < cfqueryparam value = "" # locale8 # "cfsqltype ="cf_sql_integer"/ >"
  )
  < / cfquery >
  < / cftransaction >
  < cfset variables.objectID = qCreateResult.GENERATED_KEY >
  < / cffunction >
  
  [No I am not really using Field1, 2, 3 in my code and my password is not actually password, but you get the point].
  
  Again, this works in my lab. (CF8, MySQL 5.0, Apache, standard Connector/j) That is what it is?
  
  Personally, I think that my environment is not what it was supposed to be regardless of what I was told. The rep that I was talking doesn't seem to know much about ColdFusion and at the end of the conversation, he said as well and opened a ticket. Not very useful, but at least not rude.
  
  However, I want to be fair and check all the possibilities. If you see something wrong with my Code let me know that I'm rather crazy eyes will then return to writing queries to get the id.
  
  Thanks in advance!
  
  -Joe
  
  PS: Just before posting this I tried to add < cfset var qCreateQuery = "" / > to the list of the variables just to see if it would change what anyone and it doesn't work. " Still works on my system, but not on them.

  Found the problem.
  The environment has been set up correctly, but the DSN apparently obtained the value a MySQL 3.51 Driver to the administrator.
  It's something that my hosting service, I have no control on however I also don't even think about asking them to check for me either. I forgot that CF has even a version 3 driver for MySQL.

  So my hats off to HostMySite technicians who concluded that, for me and for anyone having the same problem, I suggest you also check the same.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Is anyone having problems with the last lR? I can't do to apply effects to develop at all. I have to force to leave whenever I try to use it.

  Is anyone having problems with the last LR?

  I can't do the effects to apply to develop and I have to force to leave whenever I try to use it.

  I have absolutely nothing accomplished recently - it has worked so well.

  I created enough space on my hard drive thinking that this might be a cause of slow operation but he has not made the difference...

  Hi GKVsiuals,

  suggest make you in Lightroom preferences > performance > uncheck 'use graphics processor' and restart Lightroom to check again.

• Is anyone else having problems with the crop tool in LR6.

  Is anyone else having problems with the crop tool in LR6.
  My PC crashes sometimes when I use the crop tool in LR6. It seems fairly random, and I never had this problem in LR5.

  Have you tried to disable the GPU acceleration in Lightroom preferences?

• Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Depending on your mobilde device you must first unlock the developer settings in order to test the AIR apps on it.

  Where to find these settings depends on your specific device.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• (Problem with the arrows) Adobe Reader is not working properly

  I have problem with the Adobe Reader plug-in. When I have a tab open with the pdf file, my arrows do not work in other tabs in firefox, only in this tab where it is the open pdf file. Also, I noticed that when you try to use the arrows in the other cards, they are working on a pdf file.

  I am tempted to uninstall and reinstall Adobe Reader, but it does not work. Help, please.

  I solved the problem reinstalling Firefox, because when I turned off Macromedia my pdf file still worked, but the arrows didn't always work. I think it was a problem with the plugin from adobe.

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246