Having trouble getting Boolean button While loop is not updated

Similar Questions

• Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless

  Bluetooth

  Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.

  Can not find the necessary drivers

  Hello

  1 have you tried matching the laptop and the wireless audio link?

  2. What is the number of the model of the laptop?

  Method 1:

  Follow the link below and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)

  I also suggest you to contact the manufacturer to get the required drivers for the device and install it.

  http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html

  http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/VI-VN/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps!

• Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA

  Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA

  Original title: motorola razomax hd

  Hi Bill,

  You can read these articles and check if that helps.

  How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D

  Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device

  Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player

  For more help.

  https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US

  Additional information.

  Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. Tried to download the CreativeCloud Installer, but still now working. How to make creative work Cloud

  Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.

  How can I get Creative Cloud works on 2nd new computer please?

  Hello

  Please use the link below to completely remove the creative Cloud Desktop Application.

  Using creative cloud | Uninstall the creative cloud desktop application

  Hope this will help you.

  Kind regards

  Hervé Khare

• Can not on the button while loop

  Hi all... hoping to get a few design tips as I am very, very new to LabVIEW. I got a project that someone else had started and I've encountered a problem that I don't know how to solve.

  I'm using LabVIEW version 8.0.1 and I think my problem has to do with the help of DAQmx in a while loop. In "Working.vi" (including the Sub - VI 'Temp data to CSV.vi'), I copied - and stuck the while loop in a vacuum VI for testing. In this VI, with nothing else, it works - slowly, but it works.

  In the real VI, I can see the data of temperature updated every 4 seconds, so I know that the program is not frozen or something like that. However, by pressing the button "Return to main Menu" does nothing - the image of the button does not show that it is to be depressed, regardless of how many times you click or click and hold the button. I've attached a screenshot of the while loop inside the real VI; I prefer not to fix the real VI (especially because it contains references to many of the Subvi, and it is not currently contained within a LAW degree).

  I'm this coding the wrong way? I have the feeling that it might be caused by my settings DAQmx (continuous samples, 2 samples to read, 250 mHz). The very low rate would be the cause? Is there a better way to have readings of temperature taken every 4 seconds (approximately)?

  You have your case of event the value "lock the front panel" until full?  If so, then no other presses the button will be recognized until the ongoing case event complete.

  It is never a good idea to have a code in an event business that takes a long time to run.  It will make your UI seems to lag or even functional.  Any time I see someone with a while loop inside a case of the event, I'm afraid.  (By the way, I am also concerned all nodes comments hovering over the structure of your event?  What are doing?  Why some operate on the default data?)

  In general, events should take is no longer running then what ordinary person could be expected until they feel like the user interface is delayed.  Perhaps at the top of 1-2 seconds.  You should look at a model of design of producer/consumer with events.  The structure of your event should respond to UI events, then pass orders by a queue path to the part of your program that does the real work.

• Time to toggle Boolean in while loop?

  Hey everybody,

  I need to toggle a Boolean variable for a short period of time (~0.5 seconds, but it doesn't have to be exact, as long as it can be changed) when the trigger signal is on.

  -basically the variable Signal should remain False until the trigger indicator is True

  -Signal must turn to True for ~0.5 dry and turn return False after

  The program must be substantially while loop (loop data acquisition). Using the calendar could affect the acquisitive data (not shown in the sample program).

  I tried to do this with a case structure and sequence flat but in vain. Any suggestions are welcome. THANKS FOR YOUR HELP!

  

  Something like that?

  

• Hi, having trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.

  Hi, I have trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.  Here I did successfully about 3 days ago, but since then has picked up a virus.  I used system restore to restore my computer about 5 days, which was to remove the creative cloud and Photoshop.  Now I am trying to re - download creative cloud with no luck.  Any idea would be highly desirable. -Demian Arend

  Hello

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• I'm having trouble getting updates to download automatically...

  I can't get windows to download updates. I had this problem since 11/11/09. Is someone can you please tell me what I can do to fix this? I can't download 2007 Microsoft Office System, Microsoft Excel 2007, Microsoft Works 8.
  Thank you
  angrob93

  Compliments of my MVP TaurArian colleague:

  You can try to download the updates manually (search for a download
  http://www.microsoft.com/downloads/search.aspx?displaylang=en) or try the following command to see if it helps

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Where d = the drive where Windows is not installed (IE a flash drive or a 2nd hard disk etc.): click Start, run, type:

  "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes)

  and then press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Having trouble getting the voice VLAN on the switch X1052P to work at all

  Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...

  Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.

  Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.

  I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.

  Network administration > VLAN > VLAN static

  Network administration > VLAN > Voice VLAN

  I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.

  This is the short story from where I am now. Any help is greatly appreciated.

  FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.

  After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.

  I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!

  SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.

  So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.

• Having trouble getting first pro clips cut into compositions

  I'm working on a mashup of TV intro in the style of happy days to see the tv with another Publisher.  I'm a complete noob with sequelae.  I have never used before for anything.  The other editor has created the model in the after effects of the turntable with the player intros compositions in the center of the disk and sent the project.  He created a composition for every character intro and I'm trying to get in and replace the clips which he used as place holders with clips that I cut in first pro.

  As a first step, I managed by dragging the first pro sequence in the after effects project.  Then when I looked at the composition of the sequence, I could see the trimmed clips and could copy paste clips I wanted in their compositions respective intro.  I noticed the first time, I imported the sequence in AfterEffects and make the changes in first pro it updated in real-time.  Now all of a sudden the changes I made to the first pro sequence is more updated of sequels.  What's weird, it's update to the extent if I watch the sequence in after effects viewer I can see the changes, but on the scenario where the clips are arranged the changes are not reflected and it shows me a previous version of the sequence.

  So my two main questions are

  (1) how is the line time in legacy is no longer updated is the changes I make to the sequence in first pro?

  (2) what is the best way to get trimmed first pro clips in after effects compositions?

  Question 1:

  Since you're so new to AE, it is quite possible that a number of things that happened without realizing you it. This and you have given a lot of information for troubleshooting I mean, we don't know yet the raw versions you use, much less minor version numbers. (For example, we do not know if you use CC 2014, much less if you run the update 13.2 for AE or not.) Here is some info that we need to help: http://forums.adobe.com/thread/961743

  http://forums.Adobe.com/thread/961743

  Question 2:

  You can choose file > Import Premiere Pro Project and he'll bring the clips. It does not update, but it will give you the items you need in a way that is easier to deal with EI.

  Alternatively, you can choose to dynamically bind a first project (which resembles what you initially). In most cases, I prefer the first way.

  Since you have never used before AE, there will be a lot of things that frustrate you if you try to plow ahead without knowing the basics. I highly recommend you to go through the resources linked here: granted starting After Effects , there is a wide range of resources, but that's because EI is such a deep and complex program. Without a foundation in the basic principles, you just want to keep to be frustrated.

• Why a while loop does not start in a flat sequence if I have another loop running in a different sequence of flat?

  Hi all

  Basically, I'm in the order of many device and regulation for that pourpose, I created a sequence of plate to do. Also, at times I have start the potentiostat measures I use too, which follows a sequence and I created a second flat sequence to do this. In a part of my experience, I want to follow the voltage and current of high voltage power supply that is located in the flat main sequence and also read the results I'm getting with the potentiostat simultaneously.

  In the main sequence, there is a constant bollean which triggers the beginning of the secondary sequence. In the framework after it contant Boolean, I have a while loop in which I read 2 analog inputs of the power supply high voltage with my USB-6218 for awhile every 100 m, my problem is that the Boolean constant actually starts the subsequence flat but when it reaches a while loop in which I continue to read the results of the potentiostat , for a reason that the operation does not start until the while loop in the main loop is not finished.

  I communicate with the software of the potentiostat through a driver made by the manufacturer.

  Is it possible to read analog inputs with USB DAQ and simultaneously read the results of the potentiostat?

  Thank you very much

  Without being able to see the code, can only speculate. My guess is that you have probably some data flow to the second loop that depends on the first loop finish.

• Why the execution time increases with a while loop, but not with "run continuously?

  Hi all

  I have a problem of severe weather that I don't know how to fix it because I don't know exactly where it comes from.

  I order two RF switches via a data acquisition card (NI USB-6008). One job at the same time can be selected on each switch. Basically, the VI created for this feature (by a colleague) resets all the outputs of acquisition data and active then those desired. It has three entrances, two chain simp0le controls and a cluster table, that contains the list of all the outputs and some practical information to know what is connected (specific to my application).

  I use this VI in a complex application, and I have some problems with the execution time, which increased whenever I said the VI, so I did a test VI (TimeTesting.vi) to determine where the problem came. In this special VI I record the execution time in a csv file to analyze then with excel.

  After several tries, I found that if I run this criterion VI with the while loop, execution on every cycle time increases, but if I remove the while loop and use the funtionnality "Continuous run", the execution time remains the same. In my high level application, I have while loops and events, and so the runtime increases too.

  I someone could explain to me why execution time increases and how can we avoid this? I have attached my VI test and the necessary subVIs, as well as an image of a graph that shows the execution time with a while loop and «run permanently»

  Thanks a lot for your help!

  Your SetReset_DO VI creates a channel whenever it is called.  And that you never delete a task.

  When running continuously, that it's as if it only runs once and LabVIEW has internal mechanisms to close references that will not be used again.  When a VI is used as a Subvi, LV does not know if she will be called again, and lacks these things until the first level VI stops. You have a memory leak.

  Just as you open and close your file outside the loop for, create your channel out of the loop.

  Lynn

• How can I get assistance guaranteed while I'm not in the country of purchase?

  I bought the HP Pavilion 1220st just before leaving Istanbul, Turkey. And I started to use it in the Netherlands. In the second day, I experienced a few problems and I checked the hard drive. At this time, I saw bad clusters in the hard drive and on the third day, I lost the hard drive. Now I'm contacting HP service in Turkey, everything first, they directed me to service building in Istanbul. I don't always put the possibilities if I can get help in Amsterdam. I have not yet final sense.

  My question is whether anyone has similar experiences and know how I can get support while I'm not in the country of purchase.

  Sincerely,

  Recai

  Thanks for your reply,

  Service in Turkey directed me to communicate with the service in the Netherlands. After the communication I received today a new hard drive by UPS. I reinstalled everything with my recovery disks and now I am answering this post with my new computer . It seems that everything is working now.

  Recai

• FOR loop does not update the local Variable

  I am newer to labview, and I can't wrap the head around why not a habit of local variable to update in the code if it updates on the dashboard. Anything im missing?

  Assume that you are talking about the local variable of the 'State of the cell. The terminal updates every 500ms in the small top loop, the local variable indicates simply that the indicator and thus updates also.

  The problem is "dataflow" and you need to familiarize yourself with the concept!

  Once the while loop starts, the local variable is reading and inside the loop begins. Most likely, the local variable is read before it is updated in the small loop, so most likely returns the value of a fade on the first iteration of the while loop. Now the small loop continues to go twice per second for about five seconds. Only after the loop FOR (and everything else inside the while loop) completed, the while loop will go to the next iteration, date on which the local variable is read once more, this time with the last value of the last for loop iteration of the previous iteration of the while loop.

  In summary, the local variable updates very well, it's just that the code does not read the new value around most of the time.

  Your VI is full also potential competition conditions caused by the over-use of the local variable. You need to respect the proper execution order by eliminating local variables.

  So what is the solution? Hard to say without knowing what the VI is supposed to do. Most likely, you will need to remove the inside OF the loop and use it outside while loop for everything.

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.