Why a while loop does not start in a flat sequence if I have another loop running in a different sequence of flat?

Similar Questions

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• Why my HP Scanner does not start?

  Why the scanner will not start on my printer HP Deskjet HP1050?

  The installation is correct and the scanner works fine once I get the logon request.

  Very often the application scanner will not start using either the icon or running in the start menu.

  I found that just by closing all applications loggin consumer and restart will be the application and run it.

  Clearly a bug in the HP software.

  I'm sorry you have a problem with your features. It seems that there might be something in your Windows causes this problem.

  You can stop and restart the printer spooler.

  1. click on Start Menu

  2. click RIGHT on COMPUTER

  3. choose MANAGE

  4. select Services and Applications. Click on Services

  5 down to the printer spooler. Stop and restart. Make sure it is on AUTOMATIC AND NO MANUAL.

  Then see if it works.

  "" Click the WHITE STAR if you want to say thank YOU." »

• Why after the installation does not start effect?

  I bought the full package for annual students a few months ago and I also downloaded Ai, Ps, Dw, Id; FL etc...

  Unfortunately, I would also like to Ae (After effect) and when I go to creative cloud that I does not show precisely, instead of it if I go the site makes me see the download button, but after I clicked told me that at the moment you can't download, and so I have to ask adobe support. You know why I can not download it?

  You MUST have a 64-bit computer what is your computer?

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

  -Programs does not appear if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

• Why Assassin's Creed does not start full screen mode?

  I have to type Alt + Enter whenever I want to play AC.

  Search for C:\Users\\AppData\Roaming\Ubisoft\Assassin's Creed\Assassin.ini

  In this file, there should be a line that says "fullscreen = 0" or something like that. Change to 1 and you should not do that either. This game is quite buggy for PC.

• Windows does not start until after the second day to have.

  I just got my laptop Toshiba yesterday with Windows 7 above. I used it for about 4 hours, when I'm done I turned it off by saying it close here go to start > stop. Before putting the laptop on I saw the lights on so I pressed the manual to close button, at the last second, I saw he said something as 341 on 356 updates installed, do not turn off the computer. I don't think a lot because I was tired so the next morning, I try to turn on my laptop and it stops after the Windows 7 load loading animation, and all I have is a black screen with a mouse. I tried to run in safe mode, same thing black screen with my ability to see where is my mouse.

  Contact Toshiba support under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why gadmai 208/pt218 does not work with the 64-bit system (I have just a 32-bit driver)

  hardware driver not installed

  Hi Andry,

  Thanks for posting your question in the Microsoft Community.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the error message that is accurate or complete?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

   

  For more information:

   

  Contact Support Gadmei:

  http://www.gadmeisrilanka.com/gadmei-contact-details-numbers.php

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• Novo Button does not start in OKR but in Windows

  Hi all

  I wonder if anyone can help me do my work with Novo Button.

  I have a Z50-70 who came without OS - if I want to install the OKR feature manually.

  I use Win7 Professional with OKR Engineering ed. 7.0.

  Here are the steps that I realized so far:

  1 installed Windows in UEFI (questionnaires properly as TPG) mode

  2. run OKR ed. Engineering and chose Option 2 to create the partition LENOVO_PART

  3 realized that the score was not hidden and concealed the partition using diskpart

  4. run OKR ed. Engineering and choose Option 3 (difficulty ASD)

  5 tried to start using Novo Button, choose "Recovery" - but the machine still boots into Windows after that

  See attached screenshots of my windows diskmanager and properties of the partition LENOVO_PART of diskpart.

  

  

  You have an idea why my machine still does not start in environment OKR?

  ***

  There is a strange thing that can be causing it - I'm not sure tho:

  Despite having installed Windows in UEFI mode, I need to enable Legacy Boot in the BIOS. When you enable "UEFI" only, the machine is not able to boot and returns errors

  • "Boot of Windwos Manager has been blocked by the current security policy."
  • "Default Boot Device missing or startup failed. Insert the recovery media and press a key. Then select "Boot Manager" to choose a new device Boot or Boot Recovery Media"

  Any help would be greatly appreciated!

  Thanks in advance!

  Note for someone else running on this problem:

  I finally got to work changing to MBR EFI - thank you for all your help!

• Station service does not start automatically

  Hello

  recently the Toshiba Service Station application does not start at startup of Windows (8.1). If I run the application manually, it works normally.
  I would like to restore the automatic start of this request. What can I do?

  Hello

  Open system configurations > startup and check if Toshiba service station is on the list.
  Control Panel > administrative tools > system configuration
  If Yes, check the checkbox in front of it. Restart your computer and check please if gas station will start again.

  With restart, I mean you need to complete your machine stop.

• MainStage 3.2.3 does not start

  Hey everybody! I just bought MainStage for the first time and I can't wait to try it. However, it does not start! Can anyone help?

  (1) when I run MainStage 3.2.3 it briefly appears in my dock, and then disappears.

  (2) I am then warned that it crashed with the ability to send a report to apple.

  (3) I have tried uninstalling and reinstalling, nothing helps.

  (4) I am OSX 10.11.3. iMac 21.5 inches. 3.06 GHz Intel Core 2 Duo. 12 GB of memory.

  (5) the notice of the error is:

  Process: MainStage 3 [513]

  Path: / Applications/MainStage 3.app/Contents/MacOS/MainStage 3

  ID: com.apple.mainstage3

  Version: 3.2.3 (4300.23)

  Generation information: MAMainStage-4300023000000000 ~ 1

  App item ID: 634159523

  The external application ID: 814541391

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible: MainStage 3 [513]

  User ID: 501

  Date/time: 2016-01-27 22:25:43.495-0800

  OS version: Mac OS X 10.11.3 (15 d 21)

  Report Version: 11

  Anonymous UUID: A51D0022-921A-31A7-C96C-A5F4DC651F42

  Time since started awake: 1500 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  The crashlog missing important data.

• Lenovo Z585 does not start on a DVD - jump directly to Windows

  Hello, I just got a new IdeaPad Z585 from newegg, and I can't figure out how to boot from a disk in the drawer of the DVD.

  I tried to open the BIOS and change the boot order, as well as simply go directly to the start menu. I tried with UEFI both active and disabled, as well as Secure Boot both enabled and disabled. No matter what I try, it does not start in any DVD.

  I try to install Linux and tried different discs and distributions of this. When no even reached GRUB, I tried a Windows 7 installation disc, and even that is ignored.

  What should I do?

  Hello
  The secureboot and uefi must be handicapped simaltaneously. You can try if you haven't.
  Also, could you try pressing the novo button to power your laptop. The novo button is the button of reocovery key a small next to the power button. Has then access Startup menu see if it helps.
  Concerning

• HP Pavilion p6-2054uk: HP Pavilion p6-2054uk does not start all of a sudden upward. Help, please.

  I hope someone can help here?

  I have a desktop HP Pavilion p6-2054uk (Windows 7 64 bit - i5, 3.00 Ghz - 6 GB of RAM) that I bought in 2012 and especially use of HP products.

  By starting my PC the other day, it will not start and crashes on the HP splash screen. When you press ESC, F10 and F1 and F8, it simply changes the screen to a black screen with 7 lines of text giving the details of my PC base on this subject. It should give me other optins at this stage, but does not work.

  The HP Pavilion p6-2054uk hard drive does not start even another hard drive OS I've tried from another computer with Windows 7 64 bit on it. Troubleshooting a few others, I even tried a fresh new hard drive in it with a new copy of Windows 7 64 bit to install into the CD Rom and it will not yet go through the HP start - that is abnormal screen since usually, it detects the Windows CD and install. Furthermore, fans in the PC work normal, as the eject the power of the PC CD ROM light is on too. I tried all the three available inside power cables and tried diferent nine cables sata/data and another monitor entry too, all to nothing done.

  The hard drive that was in the HP Pavilion p6-2054uk when he stopped to start up is fully accessible when placed in the other machine I have. Therefore, it is still operational.

  The notable thing only I did in the days before it were installing Adobe Creative Suite 6 but I do not think that it would cause a major problem like this, noting also that another hard disk OS (without Creative Suite 6 is installed) and a new facility wouldn't start either. Therefore, I am afraid a harware issue any.

  What could be going on here?

  Side for the second or 2 of optimism about the usual boot the PC normally makes noises, it looks like he died immediately after, suspended on the HP screen.

  Thanks in advance.

  R.

  Hi there @dougaljoe,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start and it is indeed suspended at the HP logo even with a different hard disk (with configured operating system) installed. I'm happy to help you with this.

  I suggest that you perform all hardware diagnostics in the BIOS/UEFI. Please also refer to the following, as it covers a range of start-up problems, and if you follow the symptoms you experience should be useful. It includes information on diagnosis.  Computers HP - computer won't start (Windows 7)

  According to you it might just be something easily replaceable, or something more simple to set, or in a worst case something requiring maintenance. If the worst case rears its ugly head, then try a hotline. Please use the following http://www.hp.com/contacthp and create a folder for your question and call HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html If all goes well, he will not come to that, but it is preferable to have the information if necessary.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058