Having trouble making a wireless connection

Similar Questions

• Im having trouble with my wireless setting can anyone help with the problem?

  Hi my name is Lloyd and im having problems connecting with my wireless network and need help to understand my problem

  1. http://Windows.Microsoft.com/en-AU/Windows7/setting-up-a-wireless-network
  2. http://Windows.Microsoft.com/en-AU/Windows7/view-and-connect-to-available-wireless-networks
  3. http://www.7tutorials.com/how-connect-wireless-networks

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Having trouble making a clickable banner HTML5 ad

  Hello world

  I'm just getting started making HTML5 banner ads, so I do not know this must be a simple solution, but had trouble finding the forums so far.

  I got my ad the way I wanted to look into Animate and added some simple animations (nothing too fancy, some elements are mobile withdrew the canvas, the 'visible' button has a substitution effect). I tested in the browser, and everything works perfectly.

  Now, I want the whole canvas to be clickable, so I added a button that covers the entire canvas, and it contained in the Hit State (rectangle covering the field of advertising) and the named instance of the button. I added the snippet to HTML5 Canvas/Actions/click to go to A Web Page. I saved, tested in browser and noticed a few things:

  1. By clicking on it in the browser does not take me to a web page (found by default Adobe.com that is there, as well as what would be the real link, we would use), although by positioning the mouse over the ad, my cursor change 'gloved hand.
  2. The file is read on the loop now, whereas before I added the link to the invisible button he just played once and stopped, as I wanted.
  3. There is an 'Access of undefined property window' error message in the compiler errors Panel. Here is a screenshot of what I mean:

  

  All the solutions to this? Do you enjoy helping a beginner.

  Thank you!

  You work in ActionScript 3.  You must convert your document into HTML5 Canvas for HTML5 Canvas code snippets to work.

  • Click commands > convert different document formats to convert the document to the HTML5 Canvas document.
  • In the Type de Document Converter dialog box, select HTML5 Canvas and click Browse to select a location to save the converted FLA.
  • Click OK. The announcement is now transformed into HTML5 Canvas.

  Once you correct the type of document, for banner ads, you'll want to use a "clickTAG", not a direct link.  Do you know if the banners are going to be victims of trafficking by DCM, Adwords, Sizmek or company of different ads?  (They all unique needs "clickTAG", then how you implement that will depend on how the advertising is served).

• Having trouble making a repair, then activating the product key

  Intel core 2 duo with a card mother asrock, the coa and the XP sp3 disc.

  I wanted to do a repair, because the system restore did not work.  Not so simple.  Need administrator authority, but did not know the password.  checked some forums and the administrator password has changed something I could remember and tried a repair.  Microsoft would not accept the product code, I seem stuck with a half finished repairs and can't go forward or back... help!

  Hello

  1. What is the exact error message?

  2. How are you trying to fix? (You initialize the system using disk or do you run the installation of the drive after starting from the desktop)?

  3. who is the manufacturer of your system?

  4 do you have. which type of installation selected? It should not prompt for a product key, when you perform a repair installation.

  Please answer the above-mentioned questions and provide us with any other information about the issue so that we can help you better.

  Please make sure that you type in the correct product key. Make sure that the caps lock is turned off. If you have another keyboard, connect it to the computer and type the product key

  If there are still problems, suggest him to contact Microsoft Customer Service and get the product key verified

  How and when to contact Microsoft and support Customer Service:

  http://support.Microsoft.com/kb/295539

• Having trouble making a purchase: individual level all App with annual plan, paid monthly!

  Hello

  
  

  I have problems in making a purchase, individually all App with annual plan, paid monthly, the Indonesia.

  
  

  He said: there is a problem processing your order, please contact our Service team customer care for assistance. Indonesia: 001 803 447 361 Malaysia: 1 300 80 0027 Philippines: 180014410440 Thailand: 001 800 441 8813 others: + 65 66221459

  
  

  I try to call but no one don't answer.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Having trouble making a PDF using Acrobat 9 and 10 Windows

  Hello:

  Maybe someone can help me I have an error by creating a PDF file from a file I created using MS Publisher 2007.  I use Adobe Acrobat 9 and I have 10 windows.  When I try to create the file, I get an error message in the form of a text file, the error message is below, can someone please help?  Thank you.

  %% [ProductName: Distiller] %.

  %% [Page: 1] %.

  Cambria found, using Courier.

  %% [Error: invalidfont;] [OffendingCommand: show] %.

  Battery:

  ( )

  0.0

  []

  10.0

  0

  0

  1.0

  fake

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Plans and prices: compare plans | Adobe Acrobat DC

• Having trouble making a gif of jpg

  I'm doing a gif from a series of jpg using photoshop cc.  A step in the process, according to the tutorials that I've referenced say "menu of the palette in the Animation/timeline, click the images made of layers."  This option does not appear in my menu in Photoshop CC drop down animation.  It doesn't have an option "Convert executives" but it is gray out and cannot be selected.  Have I missed something. ?  This step has been changed or assigned to another location?

  I think that I thought about it.  I didn't know that I had to click on "create the image animation.  When I did make frames from layers becomes available.  A brief click... it's me. Thank you.

• Having trouble making a tear drop shape specific

  Hello

  My difficulty is based around to win a tear drop shape on illustrator. I use two forms to make it a square and the circle (as shown in the attachment), however, the accuracy is poor because the circle and the square don't line up.

  I used a grid, but the precision is always difficult because his function of trial and error. Is there a specific way to realize this form successfully? Shown in example there are corners that comes out!

  I have Illustrator CS3,

  Helen

  Draw a circle, use the pen tool and add a point between two points of the circle.

  This new point of drag and align first the point on the left, then on the top.

  Finally, use the direct selection arrow and draw lines to the curve at the point, which makes it a square.

  I hope that's clear, it worked when I tried it anyway.

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless

  Bluetooth

  Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.

  Can not find the necessary drivers

  Hello

  1 have you tried matching the laptop and the wireless audio link?

  2. What is the number of the model of the laptop?

  Method 1:

  Follow the link below and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)

  I also suggest you to contact the manufacturer to get the required drivers for the device and install it.

  http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html

  http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/VI-VN/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps!

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

  I have a Dell laptop which does not connect to the internet via the wireless connection.   I can connect via a line to broadband, but not the wireless.   My work PC and iPad are connect.  I tried compand repair network and he says that the problem is resolved.    I tried a system restore a week before that the problem started.

  Any other suggestions?   Thank you

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for vista, win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/