HAWX DirectX 10, Windows 7 64 bit mode black screen

Similar Questions

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• When I turn on Windows Vista, I get a black screen full of f zeros.

  Original title: zero screen

  When I turn on my system (Windows Vista) I get a black screen full of f zeros.

  Hi Lyndiatxaz,

  1. you receive the error codes?

  2 are you able to boot into normal mode after getting the black screen?

  3. have you made a recent software or hardware changes to the system?

  You can check with the following and see if it helps.

  Method 1:

  If you are unable to boot in normal mode, you can start your computer in last known good configuration.

  We can refer to the following article and try to use the last known good configuration and the control.

  Using the last good known Configuration

  Method 2:

  Step 1:

  Start your computer in safe mode and check if you can start.

  Step 2:

  If you are not faced with the question in safe mode, and then perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to complete the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in the article above to configure Windows to use a Normal startup state.

  For more information, you can also view the article

  What to do if Windows does not start correctly

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• Windows 7 starts with a black screen (since the last update), if I go to the Task Manager.

  * Original title: startup error

  Windows 7 starts with a black screen (since the last update), if I go to the Task Manager and processes there are 2 sessions of "run once container" if I stop or another (they are two different size) windows lights up normally.

  Can someone help me please?

  Hello

  Thank you for the information.

  System Restore helped to heal the cause (last option of course)

  not sure about the Windows update that seemed to start the problem, but it is 2 instances of run once Wrapper were running.   I have found that if black screen you started the Task Manager, then selected and close it, either run it once windows Wrappers would begin.

  Anyway thanks for your help, we are now healed.

• Cannot install DirectX on Windows 7 (64-bit)

  I'm trying to update DirectX from here (I tried other sources):

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  and this error:

  ---------------------------
  dxwsetup.exe - incorrect Image
  ---------------------------
  C:\Windows\system32\SPINF.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.
  ---------------------------
  Ok
  ---------------------------

  Any ideas?

  Windows 7 64 bit, ATI Radeon 4890, AMD Phenom II X 4 965

  ------------

• XP 32-bit Windows 7 64-bit mode?

  Hello
  I'm ready to buy a new computer laptop gettng.  Its a version of Vista Ultimate 64-bit.  It will have the option to upgrade for free windows 7 which I assume is a version of Windows 7 Ultimate 64 bit.
  My question to everyone is how experience with the Windows 7 XP Mode.  I would like to know if xp mode is a 32-bit or the 64-bit version.  My problem is that I have some working software which will not run in the 64-bit system.
  Thank you

  Hello, orangealum

  The Windows 7 XP Mode is a Virtual PC update version that includes a pre-configured Windows XP 32 bit version.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VB 6 application on Windows 7 64 bit turns black instead of white when active control

  Our VB 6 application shows a simple form with a few text controls and radio buttons.  Text controls is by default disabled (gray), but when the user changes an option button, the control is enabled if the user can enter some data into it.  On a Windows 7 64-bit workstation, the control becomes black instead of white when turned on, then the user is unable to see what they type into it.  Y at - it any resolution to this problem?  The form works very well with Windows XP and also works very well on a Windows 2008 R2 64-bit server.

  Hi Mark,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Microsoft Developer Network. Please post your question in this Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  For reference:

  http://msdn.Microsoft.com/en-us/library/kehz1dz1 (v = vs. 80) .aspx

  Hope the above information is helpful.

• Windows Vista starts with a black screen with the mouse cursor

  Hello

  I bought a new Toshiba laptop with OS Windows Vista from Best Buy. At time of purchse that Best Buy does not give me the Vista OS software, they said that the operating system is already installed in the laptop.

  Now, after a year, I have problems with the laptop. The Vista starts with a black screen with a mouse cursor. Before writing this issue, I searched some tips to solve the problem as

  (1) by pressing F8 while the computer is on and select it the option "last good known Configuration (Advanced) option." but it didn't work.

  (2) by pressing F8 when the computer is turned on, then turn on the option 'System repair Option', it did not work.

  (3) by pressing F8 when the computer is turned on, and then select the option "" safe mode / Normal mode option "Unfortunately she also did not work."

  Could you get it someone please let me know how I can solve this problem.

  Thanks in advance

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a startup repair, etc.:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you're up a new drunning.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 starts with a black screen

  I am running windows 7 32-bit home premium, when I start my camera, it starts normally but when I'm in the log on screen, I just get a black screen and nothing happens, I tried to use the application and windows recovery windows problems but I have results not been.
  side note: my device allows to run in safe mode

  Boot your system on a system repair disc.  If you don't do not have one yet, find another job 32-bit Windows 7 machine and make a.  It's simple.  You will need to a blank recordable cd or dvd.  Start, all programs, Maintenance.

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• After using a third party partition manager program left to extend my Windows 8 partition, the system of Windows 8 start to a black screen and Windows 8 partition of the drive letter has changed

  Original title: problems of Windows 8

  I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.

  Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.

  I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.

  Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).

  Can someone help me with this please? Any help would be appreciated.

  Hello

  I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.

  Try to run auto repair from the Windows recovery environment and check if that helps.

  Method 1: start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) click Auto repair of Advanced Options screen.

  (g) following, choose the operating system by clicking on its button.

  (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.

  
  Method 2: Run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting from the Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
  
  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.

  Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.

  Write to us if you're still having problems. We will help you.

  Kind regards

• Windows XP starts with a black screen and hangs for two minutes before the end of the boot process.

  Original title: Windows xp slow at startup delayed to the office after you download the updated April 8,2011

  First time after updating, would start then black screen can see the cursor then took 20 minutes before Office input... now does the same thing but just a few minutes. What happens all started after the recent update April 8... something about a NET update? any IDE how to fix?

  Hi kaeli,.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you can start fine.

  Step 2: If he is able to start fine then try try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  See also:

  Computer stops responding with a black screen when you start Windows XP

• Windows Vista does not boot, black screen after "windows loading files...". »

  I have a laptop HP Pavilion dv2000, it came with windows vista, so I don't have a boot disk. When I try to start it, it will say "windows loading files...". "with a bar, once the bar is loaded it will say microsoft Corp. (with the copyright symbol) and another bar with a bar made up of three small bars of loading through it, once that is done, it will show a black screen. I have installed recent updates and I can't access the restore mode or security system.

  Hello

  The possible fix is the same that you can not boot the system currently.

  You need to make a computer repair/restore on another disc, borrow a friends Windows disk.
  or buy one from the manufacturer of the system. See the methods in BOLD above which also shows how
  a repair/recovery disk which is bootable.

  It may not be repairable by a user and the help of a real store of the computer (no leeks and peaks at)
  a BestBuy or other BigBox stores) or Support from HP is required.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My Windows Vista computer displays a black screen with only a white arrow to the mouse cursor.

  I have a black screen with only a white arrow to the mouse cursor.  I tried to start in safe mode, safe mode with networking, and safe mode in the command prompt. Each time, I just get a black screen with a white arrow cursor.  How can I get my screen back?

  original title: black screen

  Hello

  Remember to make changes to the computer before the show?

  Try the following methods and check the status of the issue.

  Method 1:

  Disconnect an external device connected to the computer with the exception of the keyboard and mouse and check if it helps.

  Method 2:

  If you have the Windows Vista disc, the computer by using the startup disk and perform the Startup Repair. See the following links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Make repairs to the system from the Windows recovery environment.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Method 3:

  If the method above does not solve the problem, then try to perform a restore of the system from the Windows Recovery Console. You can see the link provided in method 2.