HDD WD20EARS to HPE 112Y - power to SATA power connectors - only P4 Molex available?

Similar Questions

• HPE-112Y video card / RAM / motherboard/psu / processor / upgrade harddive

  I've been streaming broadcast game / live at 1024 x 768 resolution fps 25.00

  2 two monitors 1 at a resolution of 1024 x 768 and 1440 x 900

  I run a server minecraft and minecraft a few times

  Hello

  Is your HP HPE-112y in the original configuration or did you change?  Review the specifications.

  If you have any questions, please tell us what specific questions do you want to solve.  Have you run any diagnostic?

  Casual, without details, I suggest you a card larger video with a power as starters. Another suggestion would be to replace the hard drive with an SSD.

  Have you tried increasing the amount of memory by default assigned to Minecraft?

• 660 GTX to my hpe-112y

  OK, so I'm wondering if this card would work with my computer here are its specs

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/specifications

  This is the power supply im planning on getting

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=7906002&CATID=1079

  and finally here is my profile

  http://www.CNET.com/products/HP-Pavilion-elite-HPE-112y/specs/

  in any case if none of the parties do not work with my computer thoes pls tell me and possibly give me a recommendation on what maps and power to use, I want to be able to play most of the games in high or ultra with fall of small frame.  in any case thank you for taking the time to read this!

  Hello

  Consult this publication of the article.  Open your PC and a few measure ensure that the graphics card will adjust. While the PC is open, measure the distance between the power supply and the optical drive.  Feeding you are considering is 1.6 "longer. It compress the space between the power supply and the optical drive, making it very tight wiring and may bend the cables too.  I suggest that you consider the CX600 Corsair or CS650m they match better is physical size with the existing power supply.

  The NVIDIA GTX 660 is a map of excellent graphics for PCs that have a legacy BIOS.  The new higher level cards will not run in your PC.

  If you are not sure that the NVIDIA GTX 660 has sufficient performance, then try one or more game simulators that are available on the internet.

  These articles HOWTO HPshould be useful.

  The processor and the existing memory should be enough for most modern games.

• Upgrade the video card on HPE-112Y

  Hey, I've been looking to update my video card in the HPE-112Y, but honestly, I know almost nothing about computer hardware. How will I know what types of cards will work, or adapt? Do I need a better diet? What types of cards are actually good and worth the money? Help please, thank you.

  furrysparks has writtenkay, one last question. These two cards physically enters the computer?

  Hello furrysparks, here are the dimensions on both cards.

  NVIDIA GTS 250 product Dimensions: 9.5 x 2 x 4.4 inches

  Dimensions of the XFX HD-577 X 8.8 "x 4.4" card

  Remember that the cable connects to the back, so it will take just a little more space in the case that these dimensions.

  Just to be safe, I unplug the power cord and remove the Panel and measure the space between the end of the slot of the motherboard at the back of the case and the front of the PCIe x 16 slot. This measure should be at least 10 to 10.5 inches for the Nvidia card and 9, 5-10, 0 inches for the XFX card.

  I noticed that the Nvidia card has each of the HDMI, VGA, DVI connectors while the XFX card has only 2 DVI and a mini-Port connector. This cannot be a factor if you use DVI or have or are looking for an adapter DVI to HDMI if you wish.

• Paviollion HP HPE 112Y - no video SIgnal from the computer - monitor works

  I have a desktop HP Pavilion HPE 112Y.  About two weeks, the video has stopped working.  I replaced the HDMI cable, we replaced a VGA cable, etc with no luck.  I plugged in the screen of my laptop and it works fine, then it is certainly the office.  All I get is a message "No. Sigmal video»

  I tried to connect the monitor directly on the edge of VGA video connection - without going through the video card.  No luck.

  .  I can not get the system starts from the CMOS or restore screen.  Hard drive runs, but goes into the cycle of continuous type "whiring.

  System is about 2 years old, running Windows 7 64 bit.

  Help!

  Hello

  Try this procedrue:

  Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.

  If the above does not help this procedure: power.  Do not skip steps.

  Finally, try to clear the CMOS memory.

• Help with updates for HP MediaSmart Suite & DVD/BD discs for PC HP Pavilion Elite HPE-112y

  HP Pavilion Elite HPE-112y PC

  VT637AA-ABA

  Genuine Windows 7 Home Premium - 64-bit

  Blu - ray player

  HP MediaSmart Software Suite

  I bought my computer new from Best Buy in 2010.

  HP MediaSmart Version: 3.1.0.1

  HP TouchSmart DVD Version: 4.1.2.5122

  HP TouchSmart Music Version: 4.1.1.4604

  HP MediaSmart Photo Version: 4.1.2.4327

  HP MediaSmart video Version: 4.1.2.4322

  HULU Desktop: Host Version: 0.9.14.1 - SWF Version: 0.9.15.33

  HP MediaSmart/TouchSmart Netflix Version: 1.0.2.0

  I have apalogize, I know that this has been done before, but I'm looking for different software or updates not upgrades.

  A couple of weeks, I tried to watch a movie Blu - ray (made before 2013) through HP MediaSmart DVD, when I put the movie in him would ask if I wanted to check the updates, so I said yes, he started the process of loading and asked again if I wanted to check the updates. Finally, I took the film and went into settings, watched in updates and there was an update. So I chose the update and HP MediaSmart DVD HP TouchSmart DVD changed. After that, the movie played fine.
  
  Now I'm watching a Blu - ray movie (made in 2013) and still once he asks me if I want to check the updates, so I took the film out, went into settings, that update, but there is nothing there. I put the movie back to try again and he asks me if I want to check the updates, so I push No., he would say "disk ready for play. Press Play to start. "So I press start and it will immediately message asking if I want to check the updates. So then the movie is still in I go into the settings, that update, and there is still nothing.

  All DVD for the 2013 game and rain fines. All comics before 2013 play fine. All BDs for 2013 keep asking check updates.

  Now, I find another reason that could not work the BDs is because my DVD/BD players could be updated.

  Device: hp BD O DH4O3S SCSI CdRom Device & hp DVD a DH16AAL SCSI CdRom Device
  Driver provider: Microsoft
  Driver date: 21/06/2006
  Driver version: 6.1.7601.17514
  Digital signer: Microsoft Windows
  
  I clicked on the update for both driver and said that I was aware.

  I find no new updates for HP TouchSmart DVD on CyberLink website. Where can I check updates? In addition, what I have to update all of the HP MediaSmart Software Suite to make it work (and where I do that)? Are there updates for DVD/BD drives and if there is where can I find them?

  Someone, please help me to find the updates.

  Sorry it took so long to get back to that.

  I finally got a new monitor (a long while ago):

  HP Pavilion 22bw IPS monitor 21.5 backlit "

  1920 x 1080

  VGA, DVI - D, HDMI

  So I tried again a movie BD 2013 on the HP MediaSmart/TouchSmart DVD thanks to the new screen and he asked again if I want to check for an update, but it worked fine on PowerDVD from CyberLink 13 (which means I have to buy ). So I have not watched all BD movies on my computer for awhile.

  I recently bought a new computer and restored my old computer to its factory condition and reinstalled all programs and installed the updates I could find.

  After I restored the computer I tried BD 2013 & 2015 on HP MediaSmart/TouchSmart DVD movies and he even asked if I want to check for an update. It's been 2 years and still no new updates! Looks like HP MediaSmart has become obsolete. I don't know if PowerDVD 13 still works because I obviously don't buy it.

  Thus, it seems that if someone wants to play movies BD 2013 or newer that they should ensure that they have the right connection between the monitor and the computer and buy a new BD software to replace the old software obsolete.

  With my new computer, I'll be closing this and boxing upward. So I don't need to worry about this more.

  Thank you for your time and your help. And good luck to anyone else who might have the same problem.

• Pavilion hpe-112y: I have a hp Pavilion hpe-112y and would like to find the firewire port

  I have a hp Pavilion hpe-112y and would like to find the firewire port

  Looking at the back - #4 is the firewire port

  

• For model HPE-112y recovery disk

  How can I get a recovery for my model HPE-112y disc?

  You can not order the HP recovery kit. However, you can order it from others through the following link:

  http://www.computersurgeons.com/search.aspx?searchTerm=HPE-112y

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• Dv6500 laptop - no Standard disc HARD SATA/power connectors

  Hi - I decided to upgrade my 80 GB Western Digital Scorpio 2.5 inches with a Seagate Momentus 2.5 inch 250 GB. The Seagate as I thought, were the standard SATA power connectors. The connectors slide on, the same thing as what I saw on all SATA 3.5 Desktop drives. We WD Scorpio, the pins are divided and snap into the motherboard. So I don't think I can use the Seagate, what 2.5 inch disks have will work with the DV6500? I thought that SATA SATA.

  Duh! Answered my question on. Looked at training, I got out and noticed there is a converter of pins of connectors SATA slide standard split connectors that facilitate their insertion in Notepad. just removed the old WD drive converter and added to the new Seagate.

• Types of POWER connectors required on HP Pavilion t550.uk

  I need to replace the power supply of my HP Pavilion t550.uk to accommodate a new graphics that require 300 Watts. The PSU existing according to me is a BESTEC ATX-250-12Z REC: C.

  Open the machine up there seem to be 5 existing connections:

  (1) CD and DVD - these two players have a rectangular connector with sections of 4 x 1 and 8 wires

  (2) hard - this is very similar to the above but maybe a bit bigger in size.

  (3) motherboard - a large rectangular connector with sections of 10 x 2. Many sons.

  (4) motherboard - a connector 2 x 2 with 4 wire square.

  The new graphics card also requires a 4 pin connection.

  The existing power supply dimensions are 6 inches x 5 1/2 in. x 3 1/2 inches.

  I was considering an Antec E380 or something similar, but I am concerned about the type of connectors that I need. I think that the existing motherboard connectors are compatible with most modern power supplies, but I'm not sure about the others.

  Other http://www.itwinkle.com/be25posuba.html , which is not the same exact model, I can't find any online form describing the connectors on the Bestec. Here, they are described as 4 x PATA.

  -L'Antec has 6 x Molex (4 x SATA, which look completely different from me). http://www.Antec.com/connectors.php?ProdID=04639

  -The Cosair 430CX has 3 x 4 Pin peripheral connectors (4 x SATA).

  Are these Molex or 4 peripheral connectors that I need or do I have to seek alternatives or adapters might be?

  Would appreciate some advice.

  Thank you

  Yes, it's a 4 pin Molex. The same as that used to power the old hard disks IDE/PATA.

• DV9627cl: SATA ACHI affecting only not available in laptop DV9627cl

  I just installed a Samsung Solid State Disk in my laptop DV9627cl and it works well. However, for maximum performance, I need to set active Windows 7 and laptop BIOS AHCI to change SATA from IDE to AHCI drivers. When I display the BIOS settings after power on, only the date and time can be changed. Is there a way to define the active AHCI for SATA in the BIOS?

  Hello:

  The Nvidia chipset in your model does not support AHCI, IDE mode.

  What you see is what you get.

• HP Envy Phoenix power connectors

  Hello, I was just wondering since I don't have my HP ENVY Phoenix 810-145qe CTO desktop PC even if there will be some additional power connectors in the camera so I don't have to buy anything, I know that I need 3 to sata cables hd additional, anyone have this computer can tell me if there is & how it... Thank you...

  TAAA, welcome to the forum.

  Great choice of computer.  I have the 810-135qe Phoenix.  This is a very good for gaming.  I did it faster by adding an SSD.

  Here is the page of Product Specifications .  If you look at the section "Berries", it shows that there are 2-5, 25 "and 3 - 3.5 drive bays".  For this reason, I am sure that there are additional power connectors.  I'll check my computer when I have the time to see how many are available and report back.

• Power connector 4-pin S5-1110 or adapter?

  I need to put a USB 3.0 in my Slimline for use with external hard drives. The cards I've seen require power connectors 4 pins old style.  The Slimline is very compact and it is difficult to see where I could put a splitter or a connector.

  Any suggestions on the source of the appropriate connector and where it plugs into the Slimline?

  Hello

  Are you sure that the PSU in the slimline is big enough to handle the USB 3.0 card?

  You could look for a cable Y SATA then a SATA Adapter 4.  Here are a few examples so do some measuring to ensure that the length according to your needs.

• poorly supplied power connector

  Just got my thunderbolt and macbook pro screen, but a little puzzled that the laptop power connector that comes out of the back of the display unit is for a macbook not a macbook pro (see photo below of the Web page) - confused.

  Am I missing something? I don't remember when put my order together that I had to say anything... Do I need an adapter?

  

  Well, the MagSafe connector was used by the old MacBook, MacBook Pro and MacBook Air, but Apple MagSafe 2 released later and recent Macs have more than the connector. However, you can get the MagSafe adapter MagSafe2 to use this port, assuming that you have a MacBook Pro with the Retina display.