Dv6500 laptop - no Standard disc HARD SATA/power connectors

Hi - I decided to upgrade my 80 GB Western Digital Scorpio 2.5 inches with a Seagate Momentus 2.5 inch 250 GB. The Seagate as I thought, were the standard SATA power connectors. The connectors slide on, the same thing as what I saw on all SATA 3.5 Desktop drives. We WD Scorpio, the pins are divided and snap into the motherboard. So I don't think I can use the Seagate, what 2.5 inch disks have will work with the DV6500? I thought that SATA SATA.

Duh! Answered my question on. Looked at training, I got out and noticed there is a converter of pins of connectors SATA slide standard split connectors that facilitate their insertion in Notepad. just removed the old WD drive converter and added to the new Seagate.

Tags: Notebooks

Similar Questions

  • HDD WD20EARS to HPE 112Y - power to SATA power connectors - only P4 Molex available?

    Hi all

    I bought a new drive HARD for Western Digital (WD20EARS) and when I went to install in my HPE 112y

    I saw that the harness for my existing WD10EADS had the usual black SATA power connector (labeled P9)

    plugged in,

    still on the same spot next to my main HARD drive did not exist another SATA Black Power Connector for my new HARD drive but a great white molex 4 driver female connector P4

    I searched through the bundle of cables, Power Supplies, but I have not found another available black SATA power connector.

    So very quickly what I thought would be a simple upgrade of HARD drive stopped me in my tracks.

    So, my questions are...

    (1) can I buy an adapter's cable to power the existing WD10EADS as well as my new HDD WD20EARS?

    (2) is there a short jumper cable that allows you to convert the white Molex P4?

    (3) should I just upgrade the existing LiteOn model of block of power SUPPLY PS-5301 - 08HA / power 300 WATT?

    If so, what is a good upgrade and did so for my HPE 112y? Necessary power, 400-500-700 watts

    I have a gateway FX541S with a power of 700FB1E Delta Electronics which has 3 SATA power connectors

    that align perfectly to each of its 3 HARD drive location... Very well!

    That's why I was surprised when I saw the problem I had with my RESUME, I was expecting the same thing.

    I never thought that I would have a cable problem, after that I got my new HARD drive.

    The HP Pavilion Elite 112y has two discs, Blu - Ray and DVD as well as a Radeon HD4350 Video card and now two HDD.

    Is 300 watts enough, even though both of my HARD drives WD Green drives are.

    Unlike my front door where security HARD drive in place with a lever and blade in the front or side according to the case law can be too LOL!

    My HPE 112y has a cage for two HARD disks that screw in place... I don't have the necessary screws.

    Where can I get these very short screws to ensure my WD HARD drive?

    I tried Lowes with no luck.

    Thanks in advance for any help.

    I went simple and fast 5 minutes HDD Upgrade which I have just done to my front door, a serious project with my RESUME.

    I still love my HP, but not too friendly!

    Bud

    Hi again,

    Update.

    I went to my local computer store and got an adapter 'Y' which connects Molex 4 male pins on the computers Molex 4-pin female connector, then to a 'Y' for two SATA power connectors.

    They were kind enough to give me a bag of screws for the installation of my HARD drive in the cage.

    HDD installed in the cage, connected new red SATA cable and power cable SATA and everything has been working well since!

    Thanks again,

    Bud

  • Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

    Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

    If there is not a spare SATA power connection, maybe sometjhing like this would help:

    http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

  • Pavilion Elite 170f: SATA power connector

    SATA power cable has three connectors.  One is connected to the HARD drive.  Other two are as in photo.  What do I need connect another SATA drive to this cable?

    Glad to be of assistance.

  • the power supply in a 8300 has a SATA power connector

    I bought a new sata 750 GB drive for my dimension 8300, but lost the power cable. The PSU comes with one, or do I have to buy another?


  • All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

    All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

    Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

    Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

    Laughing out loud

  • I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software c

    I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.

    Warning: "Adobe software real failure of Validation...". » | Windows

  • I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

    I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

  • I bought standard XI but the download - new laptop is not a hard drive. Can someone please send me a link to download so I can activate with my serial number?

    I bought standard XI but the download - new laptop is not a hard drive. Can someone please send me a link to download so I can activate with my serial number?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

  • Satellite M70-159: put disc HARD question

    Hello.
    I have problem with my laptop Toshiba M70-159.
    When I have my laptop turned on, wait 2-5 minutes and my hard drive turn off why? I put in Toshiba Power Saver to never... when I click on some... my hard drive won't power on and I hear it. How can I make my drive hard not power down?

    Please help me, I have to get some software or what?

    Hello

    First of all, I would like to know why you are sure that HARD drive turn off 100%.
    If you do not hear that the HARD disc spins, it does not mean that the HDD power off.

  • removing the disc HARD dv4t-5300

    Oops someone showed me where the maintenance manual is on this.  Thank you!

    I just bought a laptop HP dv4t-5300 series.  I removed the small bottom plate to find that there are no screws to remove the disk hard so that I can put in my drive SSD OCZ Vector (w00t).  Dv6t-7300 there is two screws and disc hard this spell.

    I can't find any on HDD removal textbooks and when I called technical support HP says the hard drive can't get out and it is a particular size for a SSD will not fit.  The hard drive is a standard 2.5 "and I think that the tech knew what he was talking about.

    Anyone would be able to seat me with where to find a manual or something on this computer?  Usually youtube or some forum or Internet HP site it would, but I can't find anywhere, anything on this computer again.  Sometimes, you have to remove the keyboard in order to install things but I don't want to start taking everything as part of discover that it's just a hidden screw or something.

    Thank you!

    Hello:

    I agree that you have received incorrect information.

    Here is the link to the service manual for your PC.

    http://h10032.www1.HP.com/CTG/manual/c03581909.PDF

    Drive hard R & R procedures can be found in Chapter 4, starting on page 36.

  • How can I reinstall vista on my laptop without a disc.

    How can I reinstall vista on my laptop without a disc. I have an acer aspire 4520 and INF files are missing, umbrella I don't have a disk to reinstall. without these files, I can't update any driver...

    Hello

    You can reinstall vista without a drive on an Acer if you never received a disc when you bought

    try to press Alt + F10 at the Acer splash screen after power on to start the relocation process

    Here are the different ways to reinstall vista;

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Can I insert disc HARD 160 GB in Satellite U200-181

    Dear friends!
    If I insert disc HARD 160 GB laptop Toshiba U200-181?
    Version 3.40 BIOS

    Thank you!

    Hello

    Hmmm, comment of the snipe is not 100% good.
    If the size of the HARD drive is not supported BIOS does not recognize the HARD drive!

    I think you could use a HD up to 120 GB, but I'm not sure of the larger sizes.
    You should really examine it until you buy one.

  • 860 - 160se CTO: install a SSD and SATA power connections

    I try to add an SSD for my computer.  Does anyone know the correct references to allow the DSS must be installed in drive caddies in the chassis?

    Also, I will need another cable to SATA power by the look of it.  I need an explanation of the various SATA ports on the motherboard to know that one to connect the new drive in.

    Thank you

    Hi @Roughneck42,

    Please become a member of the HP's Support Forums. I understand that you are have question for upgrade of your computer. I'll be happy to help you.

    By HP part Surfer screw is

    482291 - 001Screw - M3 x 5mmL, TT, second lieutenant, HI / TP

    The cable is

    809377 001

    Cable - SATA3.0, 185mm, ST - ST, RF

    The SSD are

    696356 033

    Disk hard - SSD, the GNRC, 512 GB 2.5 "SATA 6GBs 3

    6GBS Drive - SSD, GNRC, TLC 256 GB 2.5 "SATA3, 696356-035Hard

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • SATA power for Slimline 450-121

    Just bought a drive additional sata hard. (to be added as a second drive)

    I see the (data) sata plug on the motherboard, but the power supply has only 1 sata power cable.

    How can I add power to my extra (second) drive sata hard?

    I watched 2 docs that are no help:

    https://t.co/QXaueAKFFj

    https://t.co/ugPaqxrwjX

    There are two ways to solve this problem.  You can get ONE OF THESE(simpler).  Or if the power supply has the former molex connectors, get ONE OF these, that simple.

    BTW: I guess you know if there is a spare Bay drive.

Maybe you are looking for