Paviollion HP HPE 112Y - no video SIgnal from the computer - monitor works

Similar Questions

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• No video signal from HP Pavilion monitor m7560n

  HP Pavilion m7560n, THE graphic card NVIDIA GeForce, monitor HP 2159 m, Windows XP.

  Screen went black with the message "no signal". I tried the monitor and cable on another computer, it worked, this isn't a problem with the monitor or the cable. The VGA connector and graphics is integrated in the motherboard, so I can't try another video card. TV-out connectors, isn't the PC so I can't use TV as a monitor. Is there another option, how to continue with the debugging before replacing the motherboard?

  Thank you.

  Most of these cards in PCIe x 16 v2.0 should work on your computer as long as it requires a 300 watt power supply system power or less. The 2 x 0 series is the oldest, while the 6 x 0 series is the most recent. Cards are plug-and-play... but you need to install a device driver for the card. The HP BIOS should automatically detect the card and disable the integrated graphics card. If you still have problems after the installation of a card, we will have to look for other issues.

• I can't do the video signal from the laptop to the TV, last night I could

  Today, I can not video signal on my tv via hdmi. last night I was able. usually when I unplug the HDMI - the computer makes a sound, now no sound.  thinking about what I did.  java updated, could have an update to adobe

  Today, I can not video signal on my tv via hdmi. last night I was able. usually when I unplug the HDMI - the computer makes a sound, now no sound.  thinking about what I did.  java updated, could have an update to adobe

  What happens when you type + P (e.g. Projector Options)? If you are unable to access the projector Options ( Start, accessories, connect to a projector), you may need to update your video driver. It is possible to distance an Adobe Flash update has made the existing one obsolete but barely.

• I have connected my laptop HMDI cable to my TV HMDI and everything worked well. Now my TV says there is no signal from the computer. Any advice?

  My cable is only a month and do not have any problem in a first time... do not find this one.

  Hello

  You did changes to the computer before this problem?

  Step 1: Again to check the connections and verify.

  Step 2: Update the video card driver.

  Step 3: Check that the TV has the correct input selected. Check the manual that came with the TV.

  Step 4: Perform the System Restore, restore to a date when everything worked well, on the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-pictures/no-signal-on-tv-when-connected-pc-to-it-using-hdmi/2168c897-a7bd-4420-b4c8-2a4b10e90ccf

• Dell Photo 926 cannot print, not receive signal from the computer via USB

  original title: mistake of communication by computer to the printer. All checks indicate sat

  My Dell Photo 926 gets no communication between computer and printer error. You can click on continue sometimes twice and even several times and it will print sometimes. Checked all the settingsa and removed my usb connection cable and tried on another printer and it worked sat.

  Printer problems in
  Windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: update
  drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows
  Tutorials:
  It consists of many themes that you can click and read the
  Tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting-
  Print
  http://support.Microsoft.com/ph/11732#tab11

  If none work, contact Dell Support
  http://en.community.Dell.com/support-forums/peripherals/f/3528.aspx

• 4540 s: no Signal from my computer to the TV with a HDMI cable

  No Signal from my computer to the TV with an HDMI cable. What can I do? Windows is up to date! My laptop is Hp4540s, Enterprise 64-bit windows 10

  Hi!, attilak:

  Welcome to Forum!

  (1) try, update of the graphics drivers, of... http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229457&swLangOid=8&swEnvOid=4192

  (2) try to change, by others, the HDMI cable.

• TouchSmart 610 unable to receive the signal from the configuration box

  I have HP 610 TV tuner equipped touchsmart all-in-one.  TV work very right up until a few days ago, when I couldn't have a signal from the cable box.  Box has changed and cables without result.  Tried a HDMI cable, but can't find the source selection.  Hung a small tv for the area with a perfect image, so that the excluded the cable/box issue.  Very grateful for any suggestions/advice/help.  Thank you!

  Hi again SuZQT,

  It is good to hear from you!

  To enable your system to receive a signal once more, I recommend you to return your system to a previous restore point before the problem occurred. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• My tv is not receiving a signal from my computer when I connect it via cable.

  problems with the computer to the TV.

  my tv is not receiving a signal from my computer when I connect via wires, I unplugged both ends and reconnected without result.

  I see on my computer if she went out a signal?

  Make sure that you connect to the right port.

  http://Windows.Microsoft.com/en-in/Windows-Vista/connect-your-computer-to-a-TV

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.

• U2414H - there is no signal from your computer

  Dell u2414h connected via native miniDP-> cable of DP for my Asus EAH6850 DP 1.2 mode

  It worked without problem for a week, but today I turned on my PC and I see on the screen "there no signal from your computer.

  I checked the cable connection, same relit DP 1.1 mode, but all the same

  My second monitor (connected via VGA) works well OK

  Is there an ideas guy?

  * Turn off the computer and two monitors
  * Unplug the two computer screens
  * Disconnect all cables to the back of the U2414H
  * Press and hold the power button U2414H for 10 seconds
  * Reconnect only the power cable to the U2414H

  * Open the User Guide of the U2414H on page 55. Run the Test Diagnostics automatic and integrated U2414H. If they pass, the U2414H is functional

  * Reconnect only the U2414H to the Asus EAH6850 computer
  * Put the U2414H, then the computer. Make sure the OSD (On Screen Display) - input Source is checked properly. What appears on the screen?

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• Computer off, showing U2913WM "there is no signal from your computer press any key on the keyboard.

  Hi all

  Any help on this incredibly annoying would be much appreciated; I googled the out of him, but without success. I have a month or so old Dell U2913WM which I am more than happy with picturewise, but he demonstrated a very annoying problem. Whenever my PC goes to sleep, or worse, when I turn off my system, the monitor goes power save mode BUT after 30 minutes or so flashes upward:
  "There is no signal from your computer. Press any key on the keyboard or move the mouse to wake him up. If there is no display, place the monitor button now to select the correct input in the on-screen Display menu source. »
  It then repeats this message every 3 minutes approximately.

  I tried to reset the options in the menu of the screen, change the PC drivers (although this may not be the issue once the PC is turned off) and checking the dual link cable DVI for bent pins. Nothing worked and he drives me crazy! I have also another 22 "Dell Ultrasharp plugged on the GTX 780 and who falls asleep without problem. Any help would be most welcome!

  Thanks :)

  OK I fixed this annoying problem. I thought I'd post here in case someone else falls on this problem.

  To remedy this I simply connected via DisplyPort and the monitor is no longer wakes himself of no apparent reason.

• I have can´t scan in Officejet 6700. Printing from the computer works perfectly.

  I have a new 6700 Officejet connected with the USB cable to the computer. (Windows XP) Printing from the computer works perfectly. Sannen works onl + y from time to time. When the attempt at analysis, he says that there is no connection between the scanner and the computer. I changed the USB cable to exclude damage to the cables. I tried all the help files for HP without result. Who please can tell me what is happening

  I think I know where banhien is trying to guide you. I'll explain his instructions in more detail below.
  
  1. make sure you are on the desktop view.
  2. double-click on the icon on your desktop that resembles your printer.
  3. under the section titled scan, you should see "Manage Scan to Computer".
  4. click on "Manage the Scan to Computer" and a window that's going to Enable.
  5. click on activate to activate computer scanning.
  
  If the icon is not on the desktop, or does not work, you may uninstall and reinstall the printer. If you need to do this, be sure to use the latest version of the software following the link. Hope this helps to clear things up a bit.
  
  Driver and HP Officejet Full Feature software

• HP Officejet 8610: Unable to fax from the computer

  I have a HP Multifunction printer and use the fax from the computer option several times a month. I discovered this week that she did not work AGAIN. I have had this printer about a year and need to reinstall the software several times. When I select the fax printer and say 'print', the fax screen should display and ask where to send them, but nothing happens. When I check the devices screen and printers, it shows the fax as unrelated to printing or pending tasks. The machine is connected because I can print to this well, that's just something wrong with the communication by fax. I found that uninstalling and then reinstalling the printer solves the problem, but the number of times that I needed to do this is frustrating. I guess that something is messed up when windows does its updates. Is there a setting of simple connection that I could update instead of reinstalling everything on all of the computers on my network? Maybe HP could be added a correction for this option to their troubleshooting.

  Hello

  You can use the universal Fax HP driver instead:

  1. Download and extract the following:
     http://FTP.HP.com/pub/softlib/software13/COL60874/DS-146586-1/HPUFDDriver.zip
     (Use a program like Winzip or right-click on the file and select extract all).
  2. Open the extracted folder and run setup.exe
  3. Follow the instructions on the screen, a printer HP Universal Fax Driver will be created on your PC.
  4. HP Universal print driver Fax, select your printer and check the box to add a queue for your printer.

  Kind regards

  Shlomi