Satellite Pro L770 - how to activate the HDMI connection?

Similar Questions

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro A100 - how to get the Wlan connection works

  Help!

  I'm a total beginner, and my problem is I can get a connection without wire only when I'm really close to my BT hub.
  My son has a laptop and gets a good connection anywhere in the House and even outside.

  He thinks I have a dodgy wireless adapter, this could be the problem?
  Can I fix it myself?

  Maybe download a new driver?
  Any suggestions would be much apreciated.

  TOSHIBA SATELLITE PRO A100

  Hello

  Your ad is not really useful.
  I mean that there is no detail about your problem
  You should first check if the laptop supports the wireless network card.
  This can be done in the Device Manager.

  Usually the WLan card must appear in Manager devices-> network adapters.
  If it s are not it is that the WLan card is not built in or the driver WLan is not installed. If the WLan driver is not installed then you should see yellow exclamation (or unknown device).

  But if the wireless network adapter is listed correctly then you should check if the WLan notebooks have been enabled. In order to activate the WLan you have to press FN + F8 and you put the switch on IT until the small LED flash.

  Finally, to configure the WiFi connection (right name WLan, encryption settings, etc...)

• Satellite Pro P100: How to activate the sound of keyboard typing

  How can I turn on the audio / sounds on my keyboard so that it creates a beep or similar, whenever I have to press a button - I need this because I keep missing keys and make a lot of typos.

  I tried all obvious and don't see any mention of how to do this anywhere?

  Hello

  I can just confirm that there is no standard option WXP and for that and you need some additional software.
  Expensive chain, you are great. I really wonder how you find it. ;)

  A BIG Thank YOU for your great job offers!

• Satellite Pro U200: How to activate the license of OneNote

  My U200 came with pre-installed OneNote, but it keeps asking for a license number. It's something and it is installed but you need to go and buy a copy, or if there was a license with the PC?

  Thank you

  Please check out what two other threads on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15769
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17908

  You can find the registration key at the bottom of the recovery of Toshiba CD cover

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite M35X-S163 - how to activate the touchpad scrolling feature?

  How to activate the functionality of scrolling on the touchpad of my laptop Satellite M35X-S163?

  Hello

  The touchpad scrolling feature can be enabled in Control Panel > mouse.

  You'll find the option but don t forget that the driver for the touchpad should be installed and you can find it on the Toshiba site:
  http://www.CSD.Toshiba.com

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• How to activate the HDMI on Satellite P300-24Z?

  Hello

  Can someone tell me how the HDMI Port get activated?

  I tried everything: different cable; another TV; latest ATI CCC, Windows Vista, Windows 7, but not matter what I do it no picture.

  In the CCC port HDMI is not yet displayed.

  With HDMI output, nothing happens.

  Hi stbarthel,

  Normally it of not necessary to enable this port. You have to connect your external monitor. Turn it on, and then select the port of entry right here. Then you can plug it into laptop you and normally the external screen will be recognized automatically.

  As written above, the user by pressing FN + F5, you can choose between the monitors.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro C850 - how to activate 'Numlock' on startup

  Hi all

  No one knows how you can activate the "Numlock" key to start the laptop.

  Concern: Satellite Pro C850 - 1LN

  I look in the BIOS (6.70) > advanced... but find nothing
  I am also looking Windows 8.1, but also without success.

  Any idea to help me?

  Thanks in advance.

  Marc

  Hi Marc

  As much as I know there is no certain special option to turn on the num lock and you can not define is as default to be always enabled. Extra keypad on the keyboard is designed for use with different applications such as Office Excel and allow you an entry comfortable numbers in some document.

  On my laptop (P500), I noticed that when I turn off laptop with active NumLock will be on next start so let is all the TIME.