HDMI icon

Similar Questions

• HDMI icon after plugin

  Summer watching movies on my tv through my laptop for a few weeks now. Yesterday the sound has stopped working. I noticed something weird today. When the HDMI is not connected the icon is available in the menu sound but as soon as I connect to the HDMI from my computer it disappears. Help!

  Hi RyanMcWilliams,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest to try the steps from the link to the following article and check to see if it helps:

  No sound in Windows

  I hope this helps.

• P70 - A satellite - after victory 8.1 update no sound on the TV via HDMI

  Hello

  I bought my laptop 3 months ago and I didn't have any problems until today.
  Yesterday I updated to Windows 8.1 and since then, I have a problem with the HDMI output...

  I connect to my laptop to the TV and the video is ok but his continuous in the laptop.
  I go to control panel > Sound > playback, but the HDMI output icon is missing.
  I can only see the audio speakers (conexant HD Smart) icon

  I tried to restore my laptop to an earlier state (the only one I could choose was yesterday) and it worked fine, but when I changed my computer laptop and then changed again to a second display screen...
  . It happens again... Output HDMI icon disappeared again

  Anyone know if this has to do with the upgrade to windows 8.1?

  How can I fix because until yesterday, everything worked well
  Thank you

  P.D.: Excuse my English... I m from Spain

  I don't have this model, but on my Satellite everything works correctly after upgrade Win8.1.
  Have you installed upgrading Toshiba instructions and document of instructions to facilities offered on Toshiba download and support page?

  By the way: can you please send name of full model of your laptop?

• HDMI Audio and Windows 7

  I'm trying to connect my Pavilion dv6 on my HDTV with a HDMI cable. I make the video, but no audio on the TV speakers. The problem started after I upgraded from Vista to Windows 7. I had no problem with HDMI with windows Vista.

  I tried to date/reinstall the audio drivers from the HP website, but it does not work. I also tried to go into the control panel and change the playback device, but the HDMI audio device icon no longer appears in the playback devices dialog box. Read-only devices are speakers and headphones double independent double headphones and SPDIF (Digital Out Via HP dock.)

  How can I solve this problem? Why the HDMI device is not displayed in the reading dialog box?

  Hi all HDMI his problem solved after I installed the new windows 7, icon hdmi on the menu of display devices have disappeared.  Here's what I did and the icon go back and redo the sound work of hdmi. Graphics cards intel must be updated. The link below will take you to the site intel and it detects the updates required for your system. http://www.Intel.com/support/detect.htm run the program and install the required updates and then restart windows. HDMI icon will be back and the sound will work normal as before.  I hope it will solve the problem of everyone with the hdmi sound problem. I have hp Pavilion dv6, I'm happy to hear the clear sound crisp again of my bar of his Philips HTS 8100. Kevin www.canvasdelight.com

• Satellite P300 - Drive necessary explanations

  Hello

  Just trying to understand what is on my records. I have Satellite P300-150 with 500 GB. It has 4 partitions (I think) with a hidden.

  C: drive is (Vista 117 GB capacity) however its filled up quite quickly so I started saving drive D (232 GB of local disk capacity) which had nothing about it. There is no drive E (but under Advanced System properties, I found a labeled disc WINRE... is this drive E?) Then walk F (data capacity 113 gb with 5 GB used) it's enigmatic whats me... If the mysterious E Drive is the WINRE so what are data on the F drive?

  Why have I not 4 discs? The reason I ask, this is drive C is high filling... so I do the right thing to save on drive D instead?

  When the D drive is full does that mean I can't use Drive F because there are 5 GB of mysterious data out there?

  When I bought the laptop with 500 GB... I thought there would be a drive with Vista and one for all my things. Instead I have not the slightest idea what drives to use and not use.

  On a separate issue... the Fn cards flash not working properly I have to start their manually whenever I want to show them on the screen. I used to be able to connect the laptop to TV, and then click HDMI icon and the output on the TV screen. Now I have to restart flash cards before you plug into TV or HDMI out icon does not work. I tried to disable at startup flash cards and then by restarting, but they still won't turn on automatically.

  Hi good

  Prior to starting us discussion offer us please some basic information.
  Purchased this laptop new or opportunity?
  Do you have the recovery DVD installation disc?

• BDP-S580 white screen after startup

  I've owned my player for several years and had zero problems with it.  However, it now turns off after startup.  I see the sony blu ray logo, then the next screen has the blue streak fell on it (I call it the loading screen) and then the screen goes white, and the signal is lost.  On the real player, however, everything looks normal.  The display shows the home page, it responds to the remote control to open and close the drive.  If I touched the game, I get the meter to display and advance but I get no sound and no video on my tv.  Indeed, after a few minutes my self to stop the countdown appears and turns off the TV because no signal detected.  My audio system (which is connected between the player and the TV) shows as it loses the signal dropping HDMI icon which is initially present when loading the blu - ray player and the logo screen is present.  Any help would be greatly appreciated.

  Oh dear, my apologies!

  I give this advice to so many people, I forgot that you actually wrote, sorry!

  I noice that you have your BD player that is connected to your audio system, can you give me the make and model number? Alternatively, you can try to reset this device if possible. Also please be sure to check that your HDMI connection wires are firmly held down, sometimes they come loose over time.

  Another suggestion, that you can try is to turn your BD drive and unplug the power supply for a few minutes before you reconnect the power and turn it back on again.

  If the issue is not fixed please visit this link below and perform these troubleshooting steps, please not, some are model specific and does not apply however it is recommended that you try to change the screen resolution by following these instructions.

  There is no picture of a Blu - ray disc player and the screen is completely black or flashes.

• How to enlarge the toolbar and all the fonts in the drop-down lists using HDMI monitor to print is to small.

  Now, I use Windows 7 and a HDMI monitor. Print them out and the icons on the toolbar Firefox and drop-down lists is very low. How can I increase the police & the size of the icons on the toolbar and to all dropdowns?
  Thank you!

  This extension allows to adjust the font size for the user interface:

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
  • Big buttons: https://addons.mozilla.org/firefox/addon/big-buttons/

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

• Satellite A300 - no sound, the "speaker" with a red icon

  Hey there!

  So, I got this Toshiba sat idle until I decided to restore it to factory settings and start using it again. I remember exactly if I didn't sound the last time I started before restoring it, but now, after three reinstalls I've still no sound, all I have is the speaker with a red x icon.

  This laptop is using Windows Vista 32 bit, I had no problem during the restore, everything has been properly installed except audio drivers. I'm sure I should have something in the sense of "Realtek High Definition Audio Driver" or something on the Manager devices, but all I have is "ATI HDMI Audio" and three devices not recognized and the only thing that appear on the output devices is "Realtek HDMI Output/ATI HDMI Audio" and say that it is not. Already tried to reinstall the Toshiba drivers, Realtek, even went as far as to try to force Windows to install the correct driver, but it ended in a BSOD.

  Then... I'm really at a loss. I really want to restore the sound, and I refuse to believe that there is no solution. The device is detected every time even though she has not recognized... Then... Am I missing something?

  Help, please. =(

  >... until I decided to restore it to factory settings
  Original recovery image contains all the necessary drivers for all hardware components, so its driver must be installed correctly.
  Can you please open the Device Manager and check the status of the sound card it.
  Please post comments.

• Qosmio X 70-A-12 X - no sound through the HDMI connection

  Qosmio X 70-A-12 X - Windows 7

  I have tried everything regarding this issue, lost 12 hours of research and asking everyone... I hope that you will give me the answer. I tried to install the drivers for different processor, Intel based, each time nothing, I have a controller, video, audio and Conexant smartaudio HD game.

  I also tried letting windows install their own driver. Windows Media Monitor... I have this case HDMI is shown but gray color, as there is nothing plugged. When I click Properties it says that everything is ok and active... so thank you for reading this. If you know another way to activate the sound via HDMI, I would be very grateful.

  PS - I picture on HDMI, but no sound.

  Thank you!!! :)

  Hello

  I checked the Toshiba download page and I can see your Qosmio machine is supported for Win7 64 bit and I think that you are using this version.
  I see ago offered all the important factors like driver chipset driver driver sound or display, so I hope everything works out well and there is no reason for experiences drivers.

  I would like to know if there is a problem when you use your machine without connect anything to it? is everything is OK with the material? You hear the sound on the internal speakers or headphones?

  To your HDMI issue: can you please explain what you are trying to do exactly?
  Are you trying to use your Qosmio with TV or what? When you open the properties of the sound > playback devices have tried to activate the listed device output digital (HDMI) and set its default value?

  By the way:
  Click on the volume icon in the taskbar and click mixer.
  Digital output is listed here? Check it out in the operative part of the option. Make sure that is not set to mute.

  Play a little with all these settings to make sure that everything is OK.

• Equium P300-16 t cannot connect to TV via HDMI

  I have an Equium P300-16 t and a TX-32LXD52 TV with a HDMI input terminal. I tried to connect Toshiba HDMI to TV HDMI TV AV control after.

  When I connected the cable the Toshiba reported a change in the display device (he changed the screen resolution), but when I click on the HDMI Out icon, it says could not connect.

  I just noticed that it says in the manual of the TV that the input terminal is not adapted for use with computers.

  I use a son plated gold.

  SPECIFICATIONS:

  Cable: Double shielded
  Color: black
  Length: 1.5 m
  Connections: 19pins - 19pins DORÉ

  Compatible with all devices that use 18 or HDMI 19pin ports:

  Box of HDTV, PS3, Sky HD, HD-DVD recorders/players, other Set Top Boxes, video monitors, projectors, LCD and PLASMA TV etc.

  The note in the TV guide really means I cannot use the installation of Toshiba HDMI or is there something I can do to work around it?

  Thank you

  You have a FULL HD TV?

  You can switch between using the FN + F5 key combination?

• No sound HDMI

  HP G72 259WM sound is ok on laptop, but when I plug HDMI the sound of the TV does not work for the single TV laptop speekers work

  HDMI is not his transfer to TV HELP!

  I installed two things sound listed above and is gone to the hp site and got realteck drivers hd audio sp rebooted 49526

  and activated for playback devices and single speaker speaker icon is

  updated, I plugged the hdmi tv and pc cord and now appears in the playback devices defined as default and tested on film and all thanks a lot for the work of assistance a few things you must understand by trial and error

• No display on screen Z30 - a Portege but HDMI / RGB ports work

  Hello

  I have a laptop of i7 Z30 - A old Portege of 6 months (PT243A-0HW02X) running Windows 7 64 bit and the internal display of 1920 x 1080 screen 13.3 "doesn't work - nothing is displayed on the screen.

  However, I can connect an external monitor via the port of RGB cable or the HDMI port and still use the laptop like that.

  I tried various output F5 toggle function choose Clone, external, Extend, switch display, but nothing works to get back out again to the laptop screen.

  The external option that I see a gray icon to clear color laptop with an X on the screen, and a '1' on another display icon and a window is displayed for "Toshiba Flash Cards" red x error message "Failed to initialize the output Configuration dialog box!". "."

  There is no extra help available to tell me what the problem is.
  When I choose the option to set up output function F5, the 'Internal' line is grayed out so I can't select it.

  Does anyone else have this problem?
  An update of the BIOS might help tell me if there is a hardware problem?
  There is nothing about the display error in the Windows Event Viewer.

  Thank you.

  I'm wrong CPU built in this Z30t-A-123 should be the Intel i7-4510U and this processor supports the Intel HD Graphics 4400.

  The latest graphics card for this Intel graphics driver may be downloaded from the Intel page:
  https://Downloadcenter.Intel.com/

  Here, you will get the list of drivers for the Intel HD 4400
  https://Downloadcenter.Intel.com/sea...+Graphics+4400

  I recommend you to choose the ZIP package in order to install the driver in Device Manager by using the Advanced installation procedure.

• Question I look at KODI cable HDMI MacBook Pro 13"

  Hello, I have a MacBook Pro 13 inch with the retina display; 2.9 GHz Intel Core i5 processor and an a 6100 Graphics Iris Intel running iOS EL Capitan 10.11.3.

  My MBPro has an HDMI port that I'm supposed to be able to connect to and watch on my TV. When I connect the HDMI to the TV, I met a few scenarios.

  My desk top appears on the TV (even if it is a modified version of my office, in what most of my icons are not displayed)

  I can hear the show on television but not to see the movie on the TV; KODO always plays on the MBPro.

  I can watch on my MBPro KODI but I would prefer to watch on the big screen.

  I tried:

  connection cable before I start,

  cable connection during execution of KODI

  go to System Preferences / display and AirPlay of selection and non-selection and mirrored and I really have no idea if anything else that I can solve this problem.

  Help, please.

  With the connected HDMI, available to the default view will be a desktop for your Mac and one for the TV.

  You can drag the window from application KODO to the TV screen to see her there. See System Preferences > monitors > Arrangement to see where the TV is set, probably to the right of the screen of the Mac. You can also drag TV to a favorite place there too.

  Alternatively, if you select mirror display in System Preferences > displays both screens will display the same content.

• Pavilion x 360: no sound in my TV when I plugged in my HDMI cable

  Hello, I just bought a HDMI cable to connect my HP Pavilion x 360 on my TV. Unfortunately, I get only video on my TV but no sound. Audio only comes from my x 360 Pavilion. I am aware of the right by clicking on the volume icon and clicking on "playback devices" to defult cable HDMI or TV. Unfortunaly, it is not visible even after activating the devices disconnected and disabled. Please, someone help so I can get sound on my TV as well? I left a screenshot. As a reminder, my HDMI is connected on both sides, and I also disconnected and disabled visible devices. Thank you!

  On my HP Envy, there is a known issue, that the system still does not recognize the new connection, so you get no audio and video.  The solution on my machine is to connect the hdmi cable with the computer and the television to stop (or at less the computer sleep), THEN you will need to activate them in the right order - I think that this is TV first, then computer to find the live TV connection already when it starts / wakes up.