HDMI no sound between KDL46EX520 and BDVE2100

Similar Questions

• Reduction of sound between CS5 and CC

  Hello

  I created a project in first Pro CS5.

  I just had to first Pro CC.

  When I open my project in first Pro CC, the noise level has dropped.

  How can I retrieve the original sound level in first Pro CC?

  Thank you in advance.

  Axel

  Manually adjust.

• Why apple is only stream at 256kbs? ! ? ! Anyone know if the upgrade is in the works? There is a significant difference between the quality of the sound between 256 and 320 on spotify.  If they do not upgrade it is switch it on Spotify.

  256kbs? ! ? ! It will be upgraded to 320?

  Here nobody Apple plans for the future. Submit your comments here:

  http://www.Apple.com/feedback

• Switching between microphone and line-in in the Realltek Sound Manager

  Ok.
  Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
  But how can I switch between microphone and line-in?
  At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
  Everyone knows this, or has some experience in this regard?
  Cordially in advance
  Frans

  Sorry but I don't understand what exactly you want.
  You have built in mic or you can use the external microphone connected to the mic-in port.
  When the external microphone is connected a resident will be disabled.

  The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

• Selected "do not use this device" to TV HDMI for sound. Cannot find him.

  Windows 8.

  Went to the sound engineer. Clicked on the tv that I am connected to HDMI and opens the options for this. Selected "do not use this device.

  How can I get that back? I should have just changed between speakers and tv instead of that.

  Video works, but I just can't select the upcoming sound of TV more

  NVM. fixed. lock'er upward.

  right click a blank space under playback devices

• Toshiba L2333 TV - DVI-> HDMI - no sound

  Hello!

  I have connected my PC via DVI-> HDMI cable to the L2333.
  It works very well.

  However, how can I give audio to the TV via a my sound card output?
  My PC does not provide any audio over HDMI.

  I've tried the input SCART and the entrance (by component) audio cinch. No sound.

  Thank you!

  Thomas

  DVI provides only the video signal. The HDMI port provides both: video and audio.
  If you connect the TV to s for laptop DVI, audio port would not be transmitted.

  I guess you need connect s headphones Jack card or the audio output jack to a receiver hifi (av) to get the best sound. Or another possibility to connect to the computer is the use of DVI adapter component. Then, you should be able connect the computers taken DVI Component of televisions. The audio signal would be transmitted from the headphone jack of the computer to the TV's component audio L / R

• Satellite A-L70-12W - HDMI only audio in stereo and 5.1 not send

  Hello

  I have a question about my laptop's HDMI output.

  When I connect an HDMI cable to my tv and cable toslink from my TV to my receiver, my laptop still sends 2.0 sound to my TV.

  The TV I use is the LG 42LV3400-ZA, and he is certified Dolby Digital.

  I have there any possibility of a 5.1 signal via this laptop HDMI port?

  Thanks in advance.

  HDMI offers digital sound output means that the stereo and 5.1 would be financed.
  The question is if you have used an audio source that supports 5.1, and if your playback software has been set to 5.1 too.

  There is usually only one place where you can check the audio setup for HDMI output port.
  This can be checked in Control Panel of-> sound-> the Read tab

  Here you will find the different devices that are available for the audio output.

  But as I said above: important are the settings in the software you use for audio playback.

• Re: Satellite A660-10W - connection external display with HDMI cuts sound on

  When I use an external display via the HDMI, it mutes the sound of the laptop.
  It's OK because the external display has a headphone/speaker output jack.

  However, when I close the external screen (which I use for movies only) and to use the laptop only, the sound is cut all the time that the HDMI cable is connected.

  I can't hear sound - by harman/kardon speakers or headphone - when the HDMI cable is disconnected (if the external display is turned on or off).

  Is there a way to allow me to have the choice and use her laptop - even when the HDMI cable is connected - in order not to keep plugging and plugging on?

  Thank you

  It is clear.
  If the HDMI cable is connected, then the digital output is defined as audio output by default and therefore you do not hear the sound of the internal speakers but on external monitor speakers.

  You need to change the sound settings.

  Go to control panel of-> sound-> reading tab and set the speakers to laptop as default.
  Then you should hear sound from the speakers for laptop!

• Display Port-> HDMI - no sound

  I connected my t410 to my HDTV using a DP-> HDMI adapter but no sound from the TV. don't you think it's a problem with my computer, which once connected claims that HDMI sound is on and all the way up, my DP connection, the adapter I use or my TV?

  [quote = "peoples2"] First, go to your audio settings by going to FN + F6, choose "settings Audio default is +". Then choose your TV audio as default. [/ quote] that's all that had to be done, setting the TV as default thx

• HDMI not sound - DV6T-3100

  I have a PC laptop dv6t-3100 CTO.

  The last time that I managed to connect to my Sharp Aquos LC52D62U via a HDMI cable has been about three months ago.

  I discovered it a month ago that I lost the audio of the same connection. I suspect that some of the "automatic updates" may have compromised the pilot. I could not identify the update was because there is a lot of them.

  I tried to go through a lot of messages and research, but could not find a solution.

  Please let me know what to do to get the sound.

  The laptop has Windows7 Home Premium 64-bit with 1 GB ATI Mobility Radeon HD 5650.

  Sincerely,

  Patt

  Hi Patt,

  With the laptop connected to the TV, do a right-click the speaker icon in the taskbar and select playback devices.  Left-click the HDMI AMD once to highlight, and then click the Set Default buuton.  Click on apply to save this change.  Now you have audio through the HDMI connection?

  Kind regards

  DP - K

• What is the difference between Fdisk and Chkdsk programs?

  Hello:

  I don't think I have a common question of OS knowledge and I worked a lot with both, however for years so I forgot everything I used to know.  I was talking to someone Executibles MS-DOS command line and this person I know told me in email and I did not at the moment, but he said the following:

  "Fdisk and chkdsk are pretty much the same.

  Being an old Microsoft OS Engineer I knew it was wrong, however I've been retired since almost 20 years and I have not worked with either for a while.  I looked in the KB for articles explaining the difference between fdisk and chkdsk or define at least the two against each other, but there is no specific article I could find.  I remember the days when the scariest user had a problem, but they ran all third party software on their computer and have installed BETA version software etc so I'm sure you know the drill and this type of person.

  The person who said this about fdisk and chkdsk is one of those people.  It is a really nice guy, but a nightmare to Microsoft when you talk to a convenience store to the BONE for assistance.  Is there someone out there who could you, please, help me and summarize an irrefutable definition or description indicating the differences between fdisk and chkdisk?  I don't remember the basic functions both I widely used both, but too many years have passed and I don't want to sound like a fool trying to write about the differences.

  I'd appreciate any help I want to educate my friend and the intention is to not make this person feel like a stupid either.

  Thank you, and I expect your response.

  Eric

  The two are completely different, one is a format utility the other is a utility disk check

  http://support.Microsoft.com/kb/255867/en-us

  Fdisk was used in earlier versions of victory

  http://Windows.Microsoft.com/en-GB/Windows/Fdisk-FAQ#1TC=Windows-7

• Problem between C40 and Panasonic AW-HE50HE camera

  Hi all

  We have identified a problem between C40 and Panasonic AW-HE50HE camera with HDMI connection.

  The Panasonic camera is configured with the 720 p output, and it can display on a LCD monitor.

  However, we have connected the camera C40 and Panasonic AW-HE50HE with HDMI connection, the C40 show black screen.

  The codec C40 is confirmed as well function and its specification declared support,

  1280 x [email protected]/ * /, 59,94 Hz (720 p 60)

  1280 x [email protected]/ * / Hz (720p50)

  Anyone can provide help for me, thank you,

  Ben Lai

  Hello

  Can you telnet to the codec with the camera connected and check if the codec no video camera and what is the detected resolution.

  Teck Chye

• Its deleted between pc and tv option

  Hello.

  By mistake I have managed to disable the sound between my laptop and the TV option. I was going to play a game with a helmet, and the sound came from the TV, so I disabled it and it disappeared. How can I turn it on again.
  Have almost no knowledge about the tech stuff and 'tech' English is not very good either. I hope someone can answer my question :)

  Fixed it :)

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• Difference in volume between hearing and AE

  Hello! If it's in the wrong forum, please let me know.

  (Mac Maverick, Adobe CC.) A customer has provided a clip for me one. MOV file. The sound was way, way hot on the clip, so I ran through QuickTime to export audio, has this file in hearing to normalize levels, exported as a. WAV and imported WAV in After Effects. Okey dokey.

  Problem is the audio from After Effects is still much stronger than the. WAV file. I gave of the AE to MP4 which uploaded to Vimeo to show my client, and the audio was very overwhelming. So, I went back and repeat the process to make sure that I didn't had all messed up and had the same results. I went the the audio Panel Audio in AE and lowered a full 96dB, but it had no effect on the rendered final. MP4.

  Can someone point me to some resources that explain the relationship between hearing and Adobe After Effects, or (best) explain how it works in very small words? I seem to be a bear to the brain very little...

  It seems certainly if you have two instances of the same audio in the same AE comp... and both were left running.  Check this model and disable the speaker on the audio icon, that you do not want to use.  Chances are GOOD your video even has an audio track in the annex