Hdmi output Lenovo A530 of image fuzzy tv

Similar Questions

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• Re: Satellite U400-145: no option to select HDMI as HDMI output default

  Hello

  I followed the instructions in the manual its leader to the topic on the HDMI output.
  However, when I go to the sound control panel, there is no digital output device (HDMI) listed only the Conexant Chairman and SPDIF outputs.
  I tried the default SPDIF output, which did not work.
  The HDMI works fine for the image, but the absence of the sound through it is driving me crazy.

  I'm running VISTA (fully updated) on a U400-145

  Someone at - it ideas how I can get the HDMI to appear as an output option?

  Andy

  Hello

  Go to the control panel-> Sound-> playback tab
  There, you have to click to the right.
  Then mark the options; Show all disabled devices
  Then you should see the HDMI interface.
  Now, you could activate and chose as the default value.

  Welcome them

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• HDMI output in grayscale

  Hello

  I have a Dell XPS 15 computer laptop (L502X) with a Mini Displayport and HDMI output. I'm on WIndows x 64 8.

  I have my laptop in a configuration with 2 external monitors, the two Samsumg Syncmasters (a HDMI, one on DP).

  Recently, the screen that was connected via HDMI shot in grayscale. The image is still correct, only there are no colours (apart from black to white).
  This problem is not related to the screen, because when I connect to laptop to my TV (Panasonic Viera) he has the same problem.

  Any ideas how to solve this problem without offspring of color?

  Thanks in advance,

  Jens

  In the control panel for your video card, use the "reset to defaults" option - which should correct the problem.

• T-500 HDMI output

  Hello

  I got Lenovo T500 as Christmas gift and now I'm trying to connect it to the TV using an HDMI output, but there is nobody. Despite insurance Lenovo sale guy that it comes with it.

  Can someone tell me what is the best way to connect it to your HD TV and a HD picture.

  Also on the side next to the USB ports, there is only one single port that has similar to capital D symbol, everyone knows that is it for?

  My laptop is:

  1

  2081CTO

  THINKPAD T500 EXPRESS - 1 YEAR DEPOT WARRANTY

  1

  6206 44

  SBB I.CR2DUO PR P8700(2.53GHZ)

  1

  45M 3092

  GENWIN7HOMEPREM64 VBB

  1

  45M 3740

  SBB GEN WIN 7 HM 64 PR WE EN

  1

  44 C 1924

  SBB 15.4 WSXGA + TFT

  1

  44 C 1921

  SBB ATIMOBRADEON3650WITH256MB

  1

  42 X 6309

  1067MHZ2DIMM 4GBPC3-8500 VBB

  1

  42 X 6355

  KYB SBB US ENGLISH

  1

  44 C 1927

  SBB ULTNV (TR. P. + TOUCHPAD) + END

  1

  44 C 1935

  SBB 250 GB HDD, 5400 RPM

  1

  44 C 1931

  SBB DVD REC8XMAXDUL. ATU. S.SATA

  1

  42 X 6310

  VBB EXPR. CARD SLOT/PCCARDSLOT

  1

  62P 6054

  VBB INTEGR. BLUETOOTH PAN

  1

  2616 44

  SBB INT WIMAX/WIFI LINK 5150

  1

  44 C 1928

  SBB INTWIRELESSWIDEAR.NETW.UPG

  1

  39T 6651

  SBB 9 CELL LI-ION BATTERY

  1

  39T 6442

  SBB COUNTRY PACK NORTH AMERICA

  1

  45M 3942

  SBB LANGUAGE PACK US. English

  The porti is a DisplayPort, not the same thing as an HDMI port.  There is no port HDMI on the T500.  You need an adapter DisplayPort to HDMI.  Look on EBAY or I think you can bea wheat to get one from Lenovo.  The port will give you video but not the audio.

• PC HP Compaq 8100 Elite: How can I add to my PC HP Compaq 8100 Elite HDMI output

  I would like to use my PIP (picture in picture) of HD television feature newly acquired as a monitor for my PC HP Compaq 8100 Elite, which has no HDMI output. The PIP function requires a HDMI input.

  Is there a map update I can add to the PC HP Compaq 8100 Elite to provide me with HDMI?

  At any time.

  I am pleased to have been of assistance.

  There should be a driver disc in the box.

• HDMI output have suddenly stopped. Pavilion a6340a

  Hello

  I posted here in hope that someone can give me some advice.

  The system in Question is:

  • HP Pavilion a6340a desktop computer. Double heart
  • Vista 32 bit SP2.
  • NVIDIA GF8400GS
  • COMPRO Video mate Vista TV Capture card.
  • 2 GB of RAM.

  It is a bit of an older system, I guess, but it plays well as a HTPC for a while now. It has a small LCD monitor connected via the standard connection and a large flat screen Toshiba TV connected via HDMI. He did a great job.

  Today, the HDMI output just stopped. The Toshiba TV again to survey/is visible in the Nvidia Control Panel and the Vista Control Panel when it is connected to the HDMI. the implementation of the features of multiple monitors are available. But there is nothing happening on TV.

  Things has tried so far.

  • Two different Cables HDMI - nothing.
  • Connected my Pavilion Notebook DV6 on the same HDMI port on the TV - works fine.
  • Installed the latest driver from Nvidia - nothing.
  • Tried all the three HDMI ports on the TV - nothing.
  • Physically, shot the video card in the computer, he dusted off and reassembled it. -Nothing.

  I don't understand. Could this be a processor problem, or I have to pay for a new video card? Is it possible to test the output from the HDMI port with a multimeter or something? I do not understand why it would stop just like that. I just installed Vista SP2 a few weeks ago, but it was working well after I did.

  Any help with this would be greatly appreciated. The system is out of warranty, of course, but it has been a great HTPC for me. I stuck a blu - ray inside player and I was about to give him another 2 GB of RAM.

  Kind of useless now, without HDMI.

  IM at a loss. What else can I do to verify that Exchange of the graphics card?

  Hello

  The short answer is: replace the video card VNvidia GF8400GS. If you happen to have another video card around laying which has an output and HDMI, then install it for a test. It's the fastest way to solve the problem.

  Best regards

  EICO

• F5 will not read a map and will not HDMI output

  Hey guys, I'm new here and new to F5. I just got me second hand F5 and opportunity SXS pro + card (64 GB) and the camera is not picking up. When I insert the card, turns bright red media access, and then I get locked out settings. I get a cannot continue message when I try to do something. I don't get a message to format the card, and I don't think I can access the menu to format the card manually because I don't have a HDMI output power on my HD Gratical Zacuto. Any idea of what this could be the cause?

  
  

• Qosmio G30-161: Cable for HDMI output on DVI input

  I have my G30-161 "HDMI" output as well as the analog out. I began to find a cable to connect it to the DVI to a TFT monitor, but seem to have trouble identifying which is the end "HDMI" cable connection. Does anyone know the formal classification of HDMI connector (or a UK power cable) I can be sure I buy the right cable?

  Thank you very much

  Phil

  Hello Phil

  Put? HDMI-DVI adapter? as keywords on Google and you'll find enough online shops where you can order one.

• Live streaming and own HDMI output on camcorder SONY consumer (HDR-PJ650VE in my case)

  Hi all

  I'm trying to figure out how I can live streams, using my Camcorder HDR-PJ650VE. I managed to connect the camcorder to my TV by HDMI out and get the live stream, but the problem is that it also displays the superimposed onscreen. It would be a very useful feature, since it this way, you are able to capture the stream by a jury of consumers capture and share it on Youtube for example.

  I cannot find anything on the manual release of the stream HDMI output and get rid of overlapping info. Is there a key combination or a hidden menu to achieve?

  In addition, it seems very strange SONY would not offer such feature, as for example the PANASONIC offers this good enough consumption walked on models like HC-V520

  Please, let me know if it would be possilb esolving this annoying limitation

  Best regards

  Matteo

  I want to share my discovery because it seems to be valid for all SONY camcorders: to have a clean HDMI out, turn off on HDMI CTR.

  I'm very happy now and I'll start live broadcast!

• Satellite P50-B-103 - to connect my HDMI output on a VGA monitor

  Hi all

  I just bought a satellite * P50-B-103 *, which has a HDMI output and I want to connect it to an external VGA monitor.

  I thought that I just need to buy a HDMI - VGA Converter, but the buyer was told that Toshiba, unless this model, is not ready to connect to a VGA monitor, although I use a converter.

  Is it true or I can connect my laptop to the vga monitor using the converter?

  Thanks in advance,

  Charly

  It remains that HDMI provides digital signal and analog support port VGA (RGB) signal.

  To be honest, I read a lot of articles on these adapters and converters, but in many cases, these converters are useless.

  So it s no matter if your laptop was manufactured by Toshiba or another manufacturer.
  ITSA the question of the standard of caught signals supported by each port.

• Satellite L500-131, an HDMI output to the audio amplifier

  Hello

  I can't the sound of my Satellite L500-131 HDMI port to my Pioneer amp supposed to be designed to manage these tings...

  Think the problem is in the early stages as I * don't * select "Realtek HDMI output" as default + output + option is not available.
  Playing around, I managed to get to an old Microsoft driver hidden in memory somewhere and could select HDMI output 'default' through the laptop speakers. But ultimately this ddn can't get sound through either, well that the volume to "sound board" control of Vista indicates activity signal (bars during playback of DVD)... :|

  No idea what is the problem? By selecting "Output HDMI" audio output by default seems to be a Solver for everyone, but it's the only option that is not left in me, so frustrating... :|

  Thank you very much for any help provided.

  Hello

  To be honest I often use HDMI connection on my laptop but I never had any problems with this connection. Everything is working properly and even I checked again all works well!

  Anyway, in your case, I'll try reinstalling the audio driver. You can find it on the Toshiba site.

  If you use the HDMI connection, connect the cable first. Then turn on your TV or your amplifier and finally the laptop.
  Check it!

• Y510p - drivers nvidia HDMI output that's an analog connection

  I had occasional problems with HDMI output before, but can usually get things working in certain combinations to turn off TV and laptop.

  This time, however I can't convince them to talk together. I suspect that this may be due the new drivers (353.30).

  The control panel can see TV and recognizes that it is a LG TV, but TV shows only "no signal".

  I tried

  -the extension and mirroring of the display

  -changing the resolution

  but no luck. The only thing is that enter in the nvidia Control Panel, I noticed that the control panel is refers to the "analog display" and claims that he uses the VGA connector.

  Any ideas how NVIDIA persuage it's really a digital camera display via the HDMI connector?

  Thank you

  Mark

  Now fixed by the expediency of simple to try another HDMI cable :-(