Vista SP2

Similar Questions

• Tecra M9-136 - BSOD during Vista SP2 update

  Tecra M9-136 asked this morning to upgrade to the Vista SP2 and in the process the BSOD 0x0000007E arrived. Restarted in Mode safe and continuous Setup and then finally reported that the update failed - and came back to SP1. It took most of the morning.

  It will start in Safe Mode, but on a start normal, Vista SP1 gets through fingerprint recognition and then fails with the same BSOD (there is regarding the display of the desktop).

  The laptop has BIOS 1.80 level. I tried in safe mode to install 1.90 but he told me that the battery has insufficient charge and the AC adapter is not attached. Both wrong.

  Stuck - need advice. Could this be a hard failure? Can't see how I can update whatever it is if it's a soft fault.
  Thank you

  Have you tried to make back the OS to an earlier time before the SP2 installation started?
  You can do it in safe mode.

• Skype 7.8.73.102 bug on Windows Vista SP2

  Hello world

  My OS is Windows Vista SP2.

  Each Windows Vista SP2 updates had been installed.

  I met again the same bug in Skype.

  I used to install Skype offline, and then start the first time Skype has failed

  as the attached picture.

  After you restart, Skype still doesn't work even if online.

  How could I solve the problem?

  Thank you very much.

  Best regards

  Steven.

  

  I updated to Skype to 7.10.73.101, and then, the question did not appear.

• TOSHIBA DVGW/HD TS-L802A-ATA do not work after the update to Vista SP2

  Hello

  My devices Toshiba P200 DVD/CDROM has stopped working (code 39) since I've updated with Vista SP2.

  TOSHIBA DVGW/HD TS-L802A-ATA
  RSFOBUJ XEBG5QVCPQ7C SCSI

  I run Microsoft Fix It (http://support.microsoft.com/gp/mats/?ln=en) + "your CD or DVD drive cannot read or write media.
  But it has not solved the problem.

  I download and run the Microsoft devcon command-line utility.

  > devcon stack gencdrom

  IDE\CDROMTOSHIBA_DVDW/HD_TS-L802A___TO35___\5&31E4E654&0&0.0.0
  Name: TOSHIBA DVGW/HD TS-L802A ATA Device
  Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
  Controlling service:
  CDROM
  Lower filters:
  tdcmdpst
  5 SCSI\CDROM&VEN_RSFOBUJ&PROD_XEBG5QVCPQ7C&REV_1.03\ & 36E5972 & 0 & 000000
  Name: RSFOBUJ XEBG5QVCPQ7C SCSI CdRom Device
  Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
  Controlling service:
  CDROM
  Lower filters:
  tdcmdpst

  I guess that this lower filter of "tdcmdpst" (the writing of TOSHIBA motor filter driver) is the issue.
  But I can't remove the filter 'tdcmdpst' even with admin rights.

  > devcon classfilter lower tdcmdpst

  DevCon has failed.

  How can I remove this filter to upgrade Vista SP2?

  Kind regards

  Nicolas

  Can roll you back OS to an earlier time before installation of SP2?
  Drive works properly again?

• Satellite A355 NXP FM Tuner v. 1.9 Radio Echo after Vista SP2

  I installed the Windows Vista SP2.

  Now, when I run the utility of Tuner FM NXP v.1.9, radio starts playing after a few seconds of "stuttering". Then, the audio is "echo". In other words, I hear two liable - 2 seconds late on the first. I can't describe the matter other than an 'echo '. This made the radio almost ineffective.

  Has anyone else encountered this problem? I tried to disable MS Windows Indexing. I see no obvious problem. No other changes have been made. This occurred immediately after the installation of Windows Vista SP 2.

  Any tips?

  Windows Vista SP 2 (x 64)
  Tuner FM utility 1.9

  Thank you.

  > Has anyone else encountered this problem? I tried to disable MS Windows Indexing. I see no obvious problem. No other changes have been made. This occurred immediately after the installation of Windows Vista SP 2.

  I think you're the first person who has posted it here in the forum.
  I looked for similar topics but I found nothing.

  If you have noticed this after the Vista SP2 so I guess it has something to do with the new MS. patches Maybe there is a problem of compatibility between some patches and the pilot.
  But have you tried reinstalling the driver?
  If this is not the case to do this and check what's happening

• Satellite L300 (PSLB9A) - no internet access after installing the Vista SP2

  Just upgraded my Vista with Service Pack 2 and found that I can not connect to internet sites, have proved SP2 by rstoring to before SP2 and everything is OK, also reloaded the OS with my recovery disks and everything works OK... to - what I load SP2 then when I try to access the internet, I can't , get "IE cannot display the webpage".

  Diagnosis don't report any problems found. This happens with IE7 or IE8, the firewall is off and I can reach any network device, including my server but I am unable to load the web server page, same problem...

  Any help would be appreciated.

  Pete

  Hello

  I googled a bit and found a lot of people who reported on the same issue.
  It s certainly related to Vista SP2.
  You said you used Internet Explorer, I think you should test this also using other browsers like Firefox, Opera, etc.

• Blue screen after Windows Vista SP2 installed on my TouchSmart IQ770

  
  

  All, I came across this thread, after having the same problem (constant BSOD after Vista SP2) installed.  The fix referenced by MS that contains a placeholder file.  However, this most recent patch http://support.microsoft.com/kb/975163/ contains even more recent versions of all the files in question.

  For this installation, I went to safe mode and disabled the wireless network card.  I copied the fix of a usbstick on the desktop.  After the reboot of the machine was stable enough to install this fix (before it would break before the fix might get installed).  After the restart, yet once again, I have reactivated the wireless card.

  The system seems to be stable again (its place for over an hour now, the previous record was 5 minutes approximately from SP2)

  I hope this helps someone to another Google search for Vista SP2 IQ770 BSOD USB

• Vista SP2 error 8007371c

  Hey guys.  I tried to install updates to windows on a CLEANING system, which means that I reformatted before that I installed the windows updates.  After reformatting my computer, I went ahead and downloaded and installed every single update Windows update throw at me.  Vista SP1 was not available, so I installed it successfully.  After that, I got more updates and install them, and Windows Update prompted me to download and install the Vista SP2, so I did.

  After you download it, he tried to install it, but it failed because error code: 8007371 c, an unknown error.  Of course, I took the necessary precautions before installing the Vista SP2, which is closing all programs, running system preparation tool, try in safe mode if all else has failed and ultimately using Selective startup.  I should not REALLY have a problem with the installation of SP2 since I was on a clean system.  Then, I downloaded the standalone version of SP2 on the microsoft Web site and tried to install it.  I got an error saying: error: ERROR_SMI_PRIMITIVE_INSTALLER_FAILED (0x8007371c).  I posted this on a Vista forum and a user told me that since I can not install it on a clean system, it may be a problem with my drivers as they may be exceeded.  Well, I went to the Device Manager and pretty much checked almost all of my devices and found them to be up-to-date.

  Any ideas?

  asnagpal,
  I suggest that you run the System File Checker and see if it fix anything or returns any errors.   Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 80070490 vista sp2 installation. SFC said CBS mum missing kb905866 - y at - it complete a simpler than a repair solution?

  I'm having the same problem as others, i.e. a previous update failed during installation (power failure) and now Vista SP2 install it, complain about 80070490. Running sfc/scannow says I have 6 CBS MUM missing kb905866. Recommendation found Googling this problem from microsoft is to repair vista, requiring downloads of the entire suite of updates which will take ages!  Can't I just uninstall the KB or remove the registry entries for it or something to force it to be reinstalled?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on!

  Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.

  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

• Windows Vista SP2, is error (0 x 80070490)

  I bought this computer in 12/2007 and Windows Vista SP1 is already installed when I bought, but now the updates for Windows Vista SP2 and when I click on install request I accept the terms, but then I get a this: ERROR NO FOUND (0 x 80070490) and I got to help, but this error does not appear on the errors. What can I please I need help ASAP!

  friend of Bill w.,
  Go through this article , because it gives the steps to solve the problem you are experiencing.  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 80004005 by installing Windows Vista sp2 x 64

  I tried to install this updated 4 x I read an answer in this forum which is similar to my problem and I tried the solution, but it would not install.
  I noticed something this last time because I saw the installation process. We all know that the system can reboot several times during the installation. During the 3rd part of the installation, the user account screen asking for the password. However, I had no time to type the password in it, because it jumps to a screen saying that the computer is to install the updates. Then, when the updates for the 3rd party are finished 100% it is said that they can not be installed. Then the computer uninstalls them and puts the computer in its preinstallation State. Is it possible, because I didn't have a chance to enter my password, the computer refuses to recognize me as the administrater during the last part of the installation.  Therefore, maybe stop the installation process of the necessary changes and it returns to the previous state. I'm probably grasp at straws here, because I have never had a problem like this before. Does anyone know what I need to do to remedy the situation?
  I don't know if it's important but I installed another update after the 3rd time. The update has been successfully installed and working. So I thought that everything was ok and tried to install sp2 again. It's the same thing. Why can I install other updates, but not as an individual? Other than this problem installing, the computer works pretty well. I didn't notice a slow or something else for the past two weeks. I'm puzzled.

  I have an (office) Packard Bell imedia x 5705 Intel Core 2 Quad 4 x 1 GB (RAM) 2.33 GHz
  1000 gigabit hard drive
  Type system in Windows Vista Home Premium 64-bit
  Graphics card: NVIDIA GeForce GT130

  This computer is connected to 2 other computers with a D - Link KVM Switch. One of the other computers has a 32-bit system Intel dual core Vista sp2 running without any problem. They also share a router for internet access broadband.

  Should I try to reuse the recovery disk? I don't want to make things worse.

  Thank you, Debbie - the technical support for all your help.
  I went through all the steps mentioned above in the correct order. However, they have not corrected the problem.
  I used the Packard Bell Recovery Management options and restore my computer to its original state. Then I installed all necessary updates including sp2. I was not activate the preinstalled anti-virus software, or change programs or settings up to that later. That's the good thing. Packard Bell Recovery Management also creates a separate file for all personal files. Thus, when the computer has been reset, I still had my personal files.

• After the upgrade to vista SP2, windows does not start.

  I have download and install vista SP2, everything goes well with the installation, no error, it ends without a problem, then it restarts my computer and after reboot, it comes up saying that windows didn't start (or your computer might not start)

  I have 2 choices, start windows normally, that does nothing when I pick it up, the other option is to fix the problem, when I choose that it restore my computer to until I installed SP2, ive tried 3 times now with no luck.

  also on a note related, when I try and open internet explorer 7, it crashes, it is said that she is looking for a fix for the problem and suggests so I run windows update, which is what suggested I download SP2.

  any help anyone can give would be most appreciated.

  Open a case of Vista SP2 support free of charge. (Don't worry IE8 at the moment.) ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The installation of Vista SP2 broke my computer

  I've lived in innumerable discussions on this site and many others to solve this problem the Vista SP2 has caused my computer to have. I have a Toshiba with Vista x 64 Home Premium computer and after several attempts failed to download SP2 months ago, I tried last night and after that he was 100% and restarted my computer it actually ruined my computer to be useful. I don't have a vista disc but a recovery partition. I already tried to use the restore point created by vista before installing SP2, but of course since it is vista this restore point fails and I have created several others before, but as if by magic, they are not put at my disposal. What is even more galling it broke my partition Ubuntu separate to be able load as well which makes absolutely no sense.

  I get the same error again and again as hundreds of others after SP2 installation on the black screen: ! 0xc0190036! 3029/89361 (dsound.dll) , I found a solution involving the use of partitions recovery tools command prompt to use this code:

  C:
  CD windows
  CD system32
  faultrep.dll.old Ren faultrep.dll
  output

  now, it worked the first time during this first stop in 1316/89361 on the startup process when he stopped to faultrep.dll, then of course another stop to dsound.dll happened and I tried the same thing, as advised in a support forum and it worked in the command prompt, but loading at startup it will pass fine faultrep since the fix but will not pass the dsound.dll portion.

  I ran a test of memory and a hard drive and it is absolutely not she. It was absolutely the installation of Vista SP2 all screwing.

  A lot of people with this problem have been very well when they could use their restore point, but of course vista is still inconsistent and would not allow me to restore my computer so now I have a $1200 thanks to the crap service Pack2 weight. I can log on to the recovery tools command prompt and open notepad.exe and file open to view my computers content together intact so much, I would like to know a solution for this problem. I also found a command line to uninstall SP2 with high fees, but because I can not connect via the mode without failure of all or the safe mode with command prompt, how am I supposed to use the instructions to uninstall sp2 via command prompt?

  Any help would be greatly appreciated since windows makes my computer a waste of money.

  The page I used to solve problems has been directly for the support site for windows and for exactly the same problem I have but he did nothing. http://support.Microsoft.com/default.aspx/KB/975430 is the link, I tried method 1 is the system restore and that has failed, because it fails just about my only point that shows that I did much more than restoration. Method 2 is to rename the file that stops the boot process, who worked for the first file but not the second. Method 3 is the startup repair that does not work.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; (*Problems after installing a service pack*).

• Vista sp2 keeps trying to download t

  I downloaded vista sp2 manually and now it keeps coming up as an important download falling down

  Don't have SP2 installed when you downloaded it?

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• Why can't I show my battery icon after installation of the Vista SP2

  I recently installed Vista SP2 and my Volume, network and power system icons have disappeared since that time.  I go into the bar area tasks and menus then Notification and check boxes for Volume and power network are grayed out, the clock is always accessible.

  Can someone tell me how to solve this problem, I have to go back to a previous restore point, or do I have to uninstall SP2

  I had the same problem, but only with the battery and the sound icons, the network was ok. Chris-technician support suggested re-installing the drivers, after checking the driver updates. My drivers are up to date, so I reinstalled from the Device Manager and regained control of the display check boxes in the config of the taskbar menu. Strange thing is that I had to reboot twice more that the fix would "take." But now I have the icons in the taskbar and they work.

• SE error message: "elements not found" when installing Windows Vista SP2

  Original title: error please help

  I am running vista and currently have service pack 1 to install most programs it said I must have service pack 2, although I tried to install manny time either through the window system update or if a download on the microsoft site and I sill get the messege even while trying to install "no items" and an error code weird, I searched and google ect but don't watch until someone could please help me with this as a carnt install the basic things I need for example: microsoft word-. -.

  Please help before I end up spending 200 + just to buy a new Tower

  Hi jasonv123,

  You can read the following article and try resolution 2: run the system update readiness tool and check if you can install Vista SP2.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.