HDR Pro color cast

Similar Questions

• Color correction in Pro (remove a color cast)

  One thing I've never understood how, if you can do it at all, is the correction of simple colours in first.  Generally, I have to settle things with a combination of automatic level, self-colour, mix with the original and Image control RGB to get things just for a few UW shots.

  In Photoshop, there is a feature called "remove a color cast" where you simply click a portion of the fixed picture that should be white, then photoshop fixes the color on the whole picture so that the thing you clicked on is white and all the rest is adjusted accordingly.  On many scenes, it is the perfect color correction.

  Is there something in the Pro which is the rough equivalent to remove a color cast in photoshop?  If so, how does one access and use this feature?

  -Roger Uzun

  Remove a color cast is simple relative:

  Add the fast color corrector.

  Sample an area with the White Balance eyedropper"while holding the CTRL key down which is supposed to be white.

  Fact

• Media Encoder, adding RGB color casts on BW 16 mm Footage

  Hey everybody,
  
  I'm really puzzled by this one. I work with scans FCP6 and Apple Pro Res HQ 16 mm B & W footage. I am trying to encode a .mov independent (direct to FCP) file in Adobe Media Encoder CC (for Blu - ray) and then burn to Blu - ray with Encore CS6.
  
  I burned the first test Blu - ray last night and when I played it on my reader Blu-ray/TV, I was amazed by the loyalty and the definition of the structure of the grain or thick/complicated 16mm, even through what was only a 6 GB render .m4v (compressed 33.5 GB .mov). , Everything was perfect... EXCEPT... I had these horrible "color casts" of red, blue, green, magenta, in virtually all shots in images. Particularly in the last shot the discharge pipe (see example clips long of 14 seconds):
  
  Original: https://vimeo.com/97456916 (pass: 'original')
  Blu - ray: https://vimeo.com/97453674 (pass: "colorcast")
  
  ***
  
  Obviously the images don't look it into FCP6 or .mov in QT7. I just double checked and color casts ARE visible during playback the .m4v ME converted into yet. I also took the FCP .mov and which brought still and no. COLORCASTS. I also took the .mov, it imported back to FCP and but a color corrector 3 tracks on it and set the saturation to zero, exported to it and then ME > again and it still adds the color... So, I'm 99% positive that it is a problem of Media Encoder. Here are the settings I used:
  
  
  
  If you consider how long is took me to web compression results satisfying film 16mm in the past, I feel like I just hit a grand slam in the bottom of the 9th to the fidelity of the reading of the first Blu - ray test. The movement and the definition are phenomenal, I mean we are talking quality, test - without X.264 or Code Blu--(même avec toutes les conneries de moderne "surcompensation" désactivé sur ma TV). I'M SO CLOSE TO RENDERING/BURNING A BLU - RAY PERFECT IF I CAN JUST UNDERSTAND THAT THING OF COLOR!
  
  Got a deadline for this is put in the hands of a couple of prominent filmmakers.
  
  Any help or ideas that anyone can provide would be most appreciated.
  
  Thank you very much!
  
  Alec
  
  ***
  MAC PRO / / OSX 10.7.5 / / 2 x 2.66Gmz 6-Core Intel Xeon / / 32 GB at 1333 MHz DDR3

  SOLUTION *.

  Well, it seems silly that I had to do this at all, but here is the workflow that finally seemed to fix the problem without adding an extra level of encoding...

  Save autonomous my calendar in FCP6 .mov > take this back to FCP as a separate sequence and apply the filter "Desaturate" (Image control > Desaturate) for the entire film > resave as autonomous .mov > convert into SOUL > master and burn on Blu - ray with still > Presto! NO COLORCASTS on sequence B & W 16mm still and no colorcasts of the file on the Blu - ray disc.

  ***

  I believe that I said above, but in case I didn't, the saturation adjustment or 'Desaturate' via the plugins FCP color corrector work... even with the same exact workflow otherwise. I have no idea why, but if someone always faces the same problem, it worked for me. Only took two weeks to do something that I guessed that would take a day, maybe two. GISH.

  ***

  Thanks again for all the suggestions guys. Really really appreciate it.

  -Alec

• CS5 HDR Pro does not work

  Just found out that the HDR Pro works with any - nave or jpg files, directly from Photoshop or bridge. It seems to start OK and then appears an error message that says that the operation could not be performed, but it does not give a reason. It is not a memory problem because I tried with pictures of size of the web with the same result. The old HDR works fine. I did have other problems with CS5 so far. The first bridge was an error message saying images were not the same size when they were, but then he went ahead and tried but could not complete.

  Thanks for any help.

  Marketa Ebert

  I had a similar problem, it says a file is not found (I don't remember the name of the file, but it ended up with a number to 70). After trying a few times and having the same problem, I have reset the global preferences (launch photoshop all in now the command alt shift Key on a Mac) and then it worked. Save your workspace and of color preferences before do you, and you also need to reset all your general preferences

• For a HPLJ 200 pro color MFP admin password problem

  I forgot the password admin for my HPLJ 200 pro color MFP, please help

  Hi noellewilson

  Please check your private message and see if you can receive mine.

• Unable to check "Remove Ghosts" in the merge to HDR Pro

  When you try to use "Merge to HDR Pro" in Photoshop CC 2015.5, I can't check the box "remove ghosts".  Everything else (sliders, other boxes) appear to be functional

  How many exhibitions (files) have you used for your Merge to HDR?

  If it is less than 3 (files) it seems it won't work, if it does not submit a screenshot of screens

  Let us know if that helps.

• Adding a color cast?

  I want to add a cast to a clip of color. Which tool is the best to do this?

  1. I tried the color corrector 3 ways, on stopwatches and played with the different sliders, although I have not seen any results. What I've done wrong?

  2. how I can keyframe a color set up a clip?

  Thank you.

  The Panel of Lumetri color workspace might be your best bet to add a color cast if you are on the CC model, however it allows "in-house" of key-framing of the workspace "whole", although its individual controls can. In the following screenshot, I'm in the color workspace... see the two tabs at the top? Left, one is the Lumetri Panel itself, and the right one is the effects tab.

  You can twirl to a few of the Lumetri controls as I show here, note how the individual effects can be framed to the key so if say you are wanting a color simple mount and can do it with a control like temperature (yellow/blue axis) and hue (green/magenta axis) or the wheels of color in the Design tab , and I show where you keyframe that starts here:

  

  Click on the stopwatch pointed straight above the wheels of color, it turns blue... and then you get the standard picture controls key to add, browse and change/delete the keyframes on the right side of this line. But... once used Lumetri Panel on a clip, the way easiest to evolution of the keyframe is in the workspace effect as shown below...

  

  Note the space between the wheels of color & the program monitor? Using the effects workspace, you have the full clip that you work on shown here in the region for a long time underlined... and that's where you right click on one of these key frames and change them from a 'hard' point for a Bézier curve effect.

  Again, you are not limited to key-framing either one effect not keyframe forgetting those multiple for each change that you want. IF, as I do, your color change involves usually several effects, the simple solution is to put over the clip that you want to add a distribution key-box or another correction on an adjustment layer. With that layer selected and using the Lumetri workspace, add the color you want to this layer. Then use the opacity controls in the Panel effects keyframes the opacity of this layer.

  0%, the layer has no effect on the layer below it (and thus the output)... and 100%, should be applied the color change, that you put in the Lumetri so that a layer above the layer below image.

  

  Neil

• Cannot view the picture after the hdr pro with 32-bit edition!

  Why can not see picture after editing in hdr pro with 32-bit?

  Hello

  See step 6 of this tutorial: Learn HDR in Photoshop, Colin - PhotoshopCAFE HDR photography tutorial

  Maybe it can help.

  Stone

• Program error PhotoShop merge to HDR Pro

  With the latest version of PhotoShop CC, I get an error message when you try to LR CC "Merge to HDR Pro in Photoshop:"cannot complete the command because the program error.

  Please check:

  HDR Pro - "could not complete the command because of a program error"

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

  Concerning

  Stéphane

• HDR Pro - "could not complete the command because of a program error"

  Select some photos in Lightroom CC, right click, "Edit In" > «Merge to HDR Pro in Photoshop...» ». Select 32-bit Mode, 'Tone in ACR', and... "Could not complete the command because of a program error". Every time. No indication of any other details (outside this wonderfully detailed error message). HDR work in 16 Bit Mode, but I prefer to work in 32 bits, for obvious reasons. The combination of three. Files CR2 to a Canon 50 d, which I did successfully many times, as recently as a couple of weeks.

  Attempt to use:

  Uninstall/reinstall full of PS.

  -Reset the PS preferences.

  -bodies "killall node" (a little Voodoo).

  -Hold on a leg (certainly Voodoo) monkey.

  Technical details:

  -PS: 2015.1.2

  -CAB: 9.5.0.585

  -LR: 2015.5

  -OS X El Capitan, 10.11.1

  -MBP 15 "retina, mid-2015

  Help, please?

  Recent error log:

  2016:03:28 21:55:07: follow-up of the main 0000000000001DA0 of type P5_ARef not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: follow-up of the main 0000000000001FA0 of type P5_ARef not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002918 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002910 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002720 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: caterpillars type 0000000000002718 P5_ADsc key not found: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  2016:03:28 21:55:07: tracking key 8 type 00000000000026D not found P5_ADsc: 1: REQUEST failed

  2016:03:28 21:55:07: Volumes/workarea/PS_16_Mac_Daily_Retail/20160113.r.355/photoshop/main/photoshop/xcode/... /interfaces/UTrackResourceImp.h: 137: REQUEST failed

  It is a problem with the Camera Raw plugin 9.5.  Until that a fix is released, the solution is to roll back to ACR 9.4 unless you have a camera that requires a 9.5 ACR.  Use the installer from 9.4 to roll back:

  https://helpx.Adobe.com/camera-raw/KB/camera-raw-plug-in-installer.html

• 'Remove a color cast' what is grayed out

  When I improve-> adjust color-> (remove a color cast) the remove color cast item is grayed out. How can I get that back to use it? I have Photoshop Elements 10.

  Dave

  Yes, sorry, I did not it was version 10.  I have 9 and 11.

  In version 9, you would choose full-time on the upper right corner of the Edit interface.

  In version 11, you would choose Expert at the top center of the interface.

• Error 48 Photoshop Merge to HDR Pro cc

  Hello

  System OS X El Capitan 10.11.3 version

  File

  Automation

  Merge Hdr Pro and UO Photomerge

  The file or folder does not exist!

  ==========================

  Impossible to use these functions.

  Recent problem.

  Kind regards

  Hi ROLYE

  I recommend you reinstall Photoshop Creative Cloud App

  Looks like the scripts required to perform the action are missing.

  Kind regards

  Assani

• everytime I open my files in HDR pro it gives me a black screen and my lightroom not gives me the possibility of HDR?

  whenever I try to use my HDR pro it gives me a black screen and lr does not give me the HDR option

  Hi cheryld,.

  Please update the drivers of graphics processor on the manufacturing site, also the Version of Photoshop to 2015.1.2.

  Photoshop CC 2015.1.2 update now available

  And you need to select several images in Lightroom > menu photo > edit in > merge HDR Pro in Photoshop.

  Kind regards

  Mohit

• Color casts in the nuances of light on open images from Lightroom CC to CC PS.

  I notice strange color casts in the nuances of light on the images, I open Lightroom cc to CC PS.

  My monitor is calibrated, and two color management applications on. The files are RAW of Nikon since a D810.

  
  

  I get a separate green/blue dominant showing on paper background (grey seals) in the shade, and where the main light goes off around the subject. When I with the pipette sample there is a small amount of extra blue in RGB but not otherwise in other parts of the backdrop - so I think (hope), is a display problem only.

  
  

  When I choose to test in sRGB, the casting, disappear when I choose to work in CMYK, it persists. I wonder if the PS may be using labour CMYK to display my image on the screen - if so, how to spend it to sRGB or is there an alternative?

  OK, as long as you can trust what you see, it's good.

  In all cases, the fundamental problem is the same: somewhere along the chain of (the conversion of source in display profile profile) display color management, something breaks down and does not have the right result on the screen. It is usually the profile, but it could also be the conversion of profile itself, such as calculated by the GPU.

  Turn off travel, the logic of color management back to the CPU, GPU, which is much more robust and reliable.

• Merge to HDR pro problem

  I try to use the merger for the since Lightroom HDR pro function, but when it opens in Photoshop it does not action... any ideas.

  Thank you

  Rob

  Hi, this is the CC version. I just reset the preferences and it now seems to work!

  Thanks for getting back to me well

  Rob