HDV - DVD - need help to determine my next course of action.

Similar Questions

• Need help to determine what caused several outbound connections domain workstation

  Need help to determine why my workstation area all of a sudden (in the last 4 days) seems to be launching many connections coming out of remote addresses of dllhost.exe.

  So far, I scanned the machine in safe mode with Malwarebytes, Malwarebytes Antirootkit, Superantispyware, Rootkit Remover (McAfee) and various other applications of identification or remove malware without success. The machine seems to be clean of malware.

  I use Sysinternals Process Explorer to view the file in question, but I can't determine how it is running. The file at the bottom of the screenshot below is the file in question. I've suspended in this shot, or there could be dozens of dllhost.exe initialized below the first.

  Using tcpview from Sysinternals shows that the process to connect to several remote IP addresses which, in many cases, are not identifiable via whois (or I do something wrong, which is quite possible).

  Is it possible to determine what triggers the executable which, in turn, seems to be calling outbound connections?

  

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Need help to determine the material for VMServer

  Hello

  I'm new to VMServer and I was hoping I could help determine what kind of material, I'll need to buy to run guests.

  I run 2-4 versions of windows at the same time on the host machine, with several more in offline (and according to the needs of switching).

  These would run a single application with very modest network traffic and low demands of cpu/memory/disk.

  I would like to than the ability to run 64-bit operating systems.

  Please let me know what would be recommended. Thanks in advance.

  Welcome to the community,

  first of all I recommend you take a look at VMware vSphere Hypervisor (ESXi) rather than VMware Server, since VMware Server has been declared end of availability January 2010 and the end of general support will be next month (see http://www.vmware.com/support/policies/lifecycle/general/index.html)

  If you want to use in the production, I highly recommend you choose a host system that is supported by VMware (see http://www.vmware.com/go/hcl)

  André

• Need help to determine what equipment to use

  I will conduct experiments of velocimetrie by image of particles on a rotary pump. A camera needs to take several pictures of the pump only when it is in a certain direction. The pump will turn somewhere around 5000 rpm, and an encoder transmits an impulse via TTL once every revolution. Setup of camera/laser receives through TTL and cannot operate less than 15 Hz, so I need to build a facility that can receive this signal high frequency encoder, reduce at the maximum rate authorized by the camera, then exit to trigger the camera. The system should work with a laptop.

  I know I'm a little foggy on the technical details, but I hope someone can give me an idea of what equipment (chassis, modules, controller) I need. Thanks for any help.

  Depending on how fast you want to taste and how much resolution you would like, we have a different family of cards you can choose from.

  M series

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14114

• Need help to determine which catalog use

  I transferred everything from my old Mac to an external hard drive a few months back and now I need to transfer it to a new computer. I have two files distinct .lrcat

  Lightroom Catalog.lrcat 27 February 2016 721.3 MB

  5 Lightroom Catalog.lrcat 9 February 2016 MB 723,7

  I did not use LR since backup catalogs, and I'm not quite clear on which is the correct catalog. I think that the newest, although curiously, the oldest is larger in file size. Anyone has any ideas on this? What version of LR this catalogue belong to Lightroom Catalog.lrcat

  Thanks for any help

  LR CC/6 is out for about a year. He started with LR CC 2015.0 (LR 6.0) and is currently at 2105/6 5.1.

  The desired catalog is CC, Lightroom Catalog.lrcat.

  You might want to consider renaming it to Lightroom Catalog.lrcat of CC - 6 so you don't get confused in the future. Once rename you it with the program of file manager for all your BONES, you have to do is either double-click on it or once LR is open, select file > open catalog and open that has renamed the file catalog.

• Need help to determine which partner is then can buy credits newsletter

  I need to buy more credits newsletter but the person who initially set up my site does not log in information from the partner portal.  How can I know who is the partner who has set up my site and how to connect to buy more credits?

  Identical to what they use to connect to the admin.

  There is a small arrow that set for an account partner on the logo and a link will be there to go to the partner portal

  You can contact live chat via the support link or the button here: status of BC

  But if you want to go under the wing of a partner with a bit more support, we are always welcome people and helping them with BC, digital marketing etc and problems solved quickly through BC, we can get - you can drop brett to prettydigital.com.au an email.

• Edition DVD, NEED HELP!

  Hey everybody! I just got a DVD of NON-COPYRIGHTED, I need to remove and add a new first scene on. I saved the Video_TS folder for my PC, but it wont let me add files (VOBs, ETC.)
  
  How can I change this DVD with the Director? Or I can not edit DVD

  oates151 wrote:

  > But I thought he said in Director, you can change a DVD? This is why I bought it... As u cant save to your PC and edit the VOBs?

  Hello

  As said previously, the Director is unable to edit the video to DVD. You will need a program like first of video editing. Director can read chapters
  leave a DVD or allow you to play the parts of a DVD. Director does not allow the creation of DVD. Any application you create will have to
  runoff from a computer (Mac or PC). It does not output to a DVD TV player.

  concerning
  Dean

  Director Professor / Consultant
  http://www.FBE.UNSW.edu.au/learning/Director
  http://www.multimediacreative.com.au

• Need help to determine the right router to buy for satellite internet

  I have satellite internet service and that you have recently acquired a 2nd computer for my child. What is the best wireless router purchase? We do not have game systems or other wireless equipment.

  I have a WRTP54g that I used when I had a modem cable and VOIP, but I don't have a home phone and the router slows down my internet experience horribly with the satellite service!

  Do I need a new wireless router, or can I work with it?

  Thanks in advance.

  To upgrade the firmware of your router, you can follow this link.

• need help to determine the type of partition for tables

  Hello
  
  I have a few tables that have millions of record. In some tables, we have data from previous years, that we do not now use. Can we create a partition of this type of tables table.
  
  On other tables, how to decide if you should use the range/list/hash partitioning on our tables.
  
  Do I need to recreate indexes for the tables after you create the partition tables.
  
  Please guide me.
  
  Best regards

  Partitioning of decisions are based on how you can access data.

  If you access date then partition by date.
  If you go through a list of values and then use the list.
  If you there is no model and you just need to break the data up into smaller compartments using hash.

  I don't see why, based on what you wrote, partitioning by date range would be not worthy of consideration.

• need help to determine the size of all tables in a table space

  Hello
  
  I want to know the size of individual Tables belonging to a particular Tablespace (ULTGNP), ordered by the size in MB. I have to analyze the tables before I have a discovery of the size. I tried this script, could someone please go through the script and correct it, if necessary errors.
  
  Select owner, segment_name, tablespace_name, sum ((bytes/1024/1024)) bytes
  of sys.dba_extents
  where owner in 'ULTGNP' and segment_type = 'TABLE '.
  Group by tablespace_name, owner, nom_segment
  order by owner, nom_tablespace, nom_segment bytes
  
  
  Thank you

  SELECT
  SUBSTR(s.segment_name,1,20) TABLE_NAME,
  SUBSTR(s.tablespace_name,1,20) TABLESPACE_NAME,
  ROUND(DECODE(s.extents, 1, s.initial_extent,
  (s.initial_extent + (s.extents-1) * s.next_extent))/1024000,2) ALLOCATED_MB,
  ROUND((t.num_rows * t.avg_row_len / 1024000),2) REQUIRED_MB
  FROM
  dba_segments s,
  dba_tables t
  WHERE
  s.owner = t.owner AND
  s.segment_name = t.table_name
  and SUBSTR(s.tablespace_name,1,20)='TABLESPACE_NAME',
  SUBSTR(s.segment_name,1,20) )='Your_table'
  
  ORDER BY s.segment_name;
  

  Published by: Adigozalov Qurban on January 25, 2011 11:08

• Need help: receiving duplicate service Eloqua App Cloud Action notice

  We have developed an application using the eloqua action service & have notification service configured in a way to our web hook and it works fine, it send a notification to our service once the campaign is activated & send us all records of contacts, but we receive duplicate notification.

  • We receive lots of contact as notification POST records in batch of 5000 but we receive notifications, duplicate & same batch of documents several times
  • hasMore flag is supposed to tell us if they had more records, but it is still as fake and we continue receiving duplicate notifications.

  Looks like that issue an eloqua https://community.oracle.com/message/12866151, please help.

  Thanks TJ fields-Oracle

  Here is the solution,

  • You must reply with a response of 200 level or Eloqua will continue to scream assuming you never received & keep sending multiple opinions until it times out at the end fix this problem resolved by the issue of duplicate notification.
  • and now that my process to receive data directly from eloqua as part of the notification service will not use the bulk import value in hasMore flag is not serious.

• Need help with a level art courses

  Hi all

  I'm quite new to these forums, delighted to see you!

  Here is a drawing that I have created by hand, and I would like to transfer in a digital format in order to play with the colors and large format printing.

  

  I'm totally new to illustrator, so have read tutorials on the ' net and here I am so far:

  

  Could someone help me how to create these smooth curves, who get the big middle and small to the edges? The final design will complete a circle at both ends. I use a straight line, starting from the mid-point of each pit and then use the handles to form the curve? Wouldn't be better to use circles?

  Thank you

  Ozzy

  HI Ozzy and welcome ~

  The thing of the Illustrator is that there are usually several ways to get the same results. And it's a good thing

  I write one way, you can try it, but there are others. Maybe drawing with the pen tool will be your best bet, but you can also try this. When you use the free transform tool, hold Cmd-Opt-shift by dragging the bounding box to get the perspective transformation.

  I hope this helps!

  

• Need help with 3.0 in Flash CS5 action script?

  Hi I work with action script 3.0 in flash and our school teacher wants us to create a simple action that allows us to have a clip from the animated film and then we have a stop and a button "play", so when I click on stop the clip stops and when I click on play it moves again. Have tried several times, I get compiler errors. I have my buttons on one layer and my video clip on a separate layer. All I have is 2 buttons. One for the stop and the other to play.

  What I am doing wrong? Here is my code and my mistakes-

  start_btn.onRelease = function() {}

  
  Polygon.Play ();
  }
  stop_btn.onRelease = function() {}
  Polygon.Stop ();
  }

  Here are my mistakes and if he please be aware that our teacher said to use action script 3 only and no action script 2.

  Scene 1, 'Layer' buttons, image 1, line 1 1120:Access of start_btn of property not defined
  Scene 1, 'Layer' buttons, image 1, line 1 1120:Access of stop_btn of property not defined
  Scene 1, 'Layer' buttons, image 1, line 1 1120:Access of the polygon of property not defined
  Scene 1, 'Layer' buttons, image 1, line 1 1120:Access of the polygon of property not defined

  I think your teacher, or anyone else, gave you sense with ActionScript 2 programming. In AS2, what oyu have here would have worked very well. But in AS3, you use a rather different approach. Your buttons and their instance name, can remain the same. But now in AS3, you must add the following event listeners:

  yourButtonName.addEventListener (MouseEvent.CLICK, yourListenerFunction);

  In your case, you can do one of two things - A) assign a unique to each key listener function or B) assign the same listsner to the two functions:

  (A)

  start_btn.addEventListener (MouseEvent.CLICK, startPolygon);

  stop_btn.addEventListener (MouseEvent.CLICK, stopPolygon);

  function startPolygon(e:MouseEvent):void {}

  Polygon.Play ();

  }

  function stopPolygon(e:MouseEvent):void {}

  Polygon.Stop ();

  }

  (B)

  start_btn.addEventListener (MouseEvent.CLICK, controlPolygon);

  stop_btn.addEventListener (MouseEvent.CLICK, controlPolygon);

  function controlPolygon(e:MouseEvent):void {}

  If (e.target.name == "start_btn") {//Test for the name of the object that sent the CLICK event

  Polygon.Play ();

  } ElseIf (e.target.name == "stop_btn") {}

  Polygon.Stop ();

  }

  }

  When I use multiple buttons that do the same/almost similar things, I support approach B on A, as it keeps me just a simple to process function.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.