He asked me to turn on my firewall of windows Security Center. where is it?
Download Security Essentials, he asked to turn on my firewall of Windows Security Center.
Where is it on my computer?
It is a process to get an answer to a question. It would be much easier that I could call someone.
Hello
In XP, click Start > Control Panel > Security Center > Windows Firewall > Select ON > click OK.
See you soon.
Tags: Windows
Similar Questions
-
I can't turn on my firewall. My Security Center will not display informfation on the firewall
We had malware on the computer, but deleted. Since this incident, I was unable to turn on the firewall and Security Center does not have information on the firewall. I've deleted and reinstalled security essesntials but it has no effect on the problem
HelloPlease follow the links below to solve the problem.Method 1You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2Method 2Diagnose and automatically fix problems of Windows Firewall serviceSee also,How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?How to recover from an infection of computer virus and how to prevent future infections from computer viruses in Windows operating systemsI hope this helps. -
cant get anti virus program to turn it on in the windows Security Center
I have windows vista and an alert pops up, saying: my antivirus program is disabled. I opened Security Center says AVG anti virus reports that it is turned off. I clicked on the button, and it didn't turn it on. another box pops up asking if I trust this program click Yes, I have confidence in it. Yet once, nothing happens. any suggestions on something that I could try.
Antivirus software can help protect your computer against viruses and other security threats. Windows regularly checks if an antivirus program is installed on your computer, that they are running, and that it is up-to-date. The status of your antivirus program is displayed in Windows Security Center. However, Windows doesn't detect all antivirus programs, and some antivirus programs report their status to Windows.
If you receive notifications related to security on your virus protection software, but you know that your antivirus software is installed and updated, you can follow the steps below to stop receiving these notifications. You should do this only if you are unsure that you have a full, the up-to-date antivirus program installed on your computer and that real-time scanning, which checks every file before it is opened or used, is turned on.
To specify that you are using an antivirus program that Windows does not find
Open Security Center.
Click on protection against malware, and then, under virus protection, click on show me my available options.
In the Windows Security Center dialog box, click on I have an antivirus program that I will control myself. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Security Center displays your antivirus settings as not monitored, and you will not receive more notifications about your virus protection software.
Note
The show me my link options is not available when the Virus protection setting is marked on.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Hey guys. I looked up and down for a solution to this problem.
I already tried this solution:
http://blogs.technet.com/b/asiasupp/archive/2011/12/27/error-code-0x80070424-with-Windows-Firewall-and-quot-base-filtering-engine-service-quot-not-available-in-services-database-list.aspx
Although the only problem is at last step when I turn on the firewall Windows or WSC (windows Security Center) since neither of them are present
in the list of the services.msc.So here I am without any windows security, no firewall and no updates. I really need help here. I was attacked by malware, a day ago, and everything happened after that. I removed the malware with program ESET NOD, but it seems that the malware corrupted my registry/safety inputs.
Thanks in advance.
Hello
I suggest you run both the fix that he mentioned below and check if it helps!
· Resolve security issues to protect and secure Windows automatically
· Automatically repair the settings of Windows security to secure your PC
I hope that helps!
-
I recently removed stretch your antivirus software, but windows Security Center indicates the trend the firewall is always turned on. How can I get rid of it or turn it off.
Hello
Control Panel - Security Center - How do I uninstall my Trend Micro using the Trend Micro program
Diagnostic toolkit
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxIf the problems, check with the support of TrendMicro.
TrendMicro - Support
http://eSupport.trendmicro.com/consumer/default.aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I get a message telling me to switch on my windows Security Center, but when I hit the switch on the button I am informed that I can not turn it on.
Hello
You should ask this in the responses - forums for your version Windows
Windows.Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows------------------------------------------------------------------------------------------------
Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
strange questions.)Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN
Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
Also check the serices dependent as below.References to Vista also apply to Windows 7.
Start - type in the search box-> find Services at top - click right on - RUN AS ADMINCheck the default services and dependencies to ensure that they are running.
http://wiki.blackviper.com/wiki/Security_CenterYou may need to redefine ALL the Services on their default values.
Windows 7
http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989Windows 7 Service Pack 1
http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/
How to fix Vista Reporting incorrect information Security Center
http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.htmlHow to disable or enable the Security Center in Vista
http://www.Vistax64.com/tutorials/67737-Security-Center.htmlThis thread might help as it might be a permissions problem.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/====================================
To look for the Windows 7 KB and responses for Solutions (most are above).
Searck of Ko &-> 1058 Security Center
http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10Search KB &-> 1079 Security Center
http://support.Microsoft.com/search/default.aspx?mode=a&query=1079+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10I hope this helps.
-
I have a security alert window in the center of the Action, which shows me that the Security Center Service is disabled. When I try to turn it on by clicking the Activate button now, I get the message: could not start the Service Windows Security Center without any error code. When I start my program I see no registration for the Security Service in services.msc. I use Windows 7 Ultimate SP1. I tried to scan with Microsoft Security Essentials, which is updated. There is no threat detected. For which I am sure that I use it for some time now about a year and a half. I got no software or hardware change recently. Also, I'm not able to update my Windows Firewall settings. When I try to change the settings there is a message: Firewall Windows cannot change some of your settings. Error code 0 x 80070424. Please help as I have tried to go well as each answer or the Forum but without success. What is a bug MSE or a real problem.
When you have imported the registry key, you probably do not change the permissions on the registry keys.
Reach
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE
Right click on it -permissions
Click ADD and type
Everyone, and then click ok
Now click on all
Below, you have the permission for users
Select full control, and then click ok
DO the same for the "reg" MPSSVC so key which also returns access denied.
Make sure also canceled to start service to invite you, he should be admin/elevated command prompt.
Also, you may need a system restart after changing the permissions on the registry key.
I hope this helps.
-
My Windows Security Center does not open, and I am also unable to turn on my firewall. I get notification "not detected any firewall software.
Hello
It seems that you need help to solve the problem of Windows Security Center. Please respond to the suite, which will help us to help you in the right direction.
1. do you get an error message when you try to turn on the firewall?
2. which antivirus app do you use?
Refer to the following information and check the status of the issue.
See the section "Nithyananda J replied on November 27, 2009" what about Windows Security Center
The windows Security Center service cannot be started.
I also suggest you to run the Fixit from the following link.
Diagnose and automatically fix problems of Windows Firewall service.
http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
You can also try to solve the problem by running SFC scan
Make the SFC scan and check the status of the issue.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I hope this helps.
-
Original title: do I have to re - install Windows 7?
Today, I opened the Action Center and noticed that Panda Internet Security reported he was off, when it wasn't. I checked the administrative events and one of the errors was: Security Windows Service Center could be same queries WMI to monitor third party antivirus, antispyware and firewall. I've got Panda IS 2012 running, which is a very good program.
I just spent a good hourzs little addressing a Panda technicina, who, after a lot of faffing autour, told me that I either set up a new profile, or I re - install Windows, I don't want to do, because I could lose the system restore facilities, (I had to ask Microsoft to help me address the issue of the restoration of the system because it did not work). The problem with the Security Center Windows Service dates back to August 10, 2011.
Anyone know what I'd do, which involves having to uninstall and reinstall Windows?
Kind regards
Emma D
Hello
1. which parameter is used to install Panda antivirus?
2 did you use typical or custom?
If you use Panda IS 2012 as an anti-virus, then Windows Security Center may have disabled the native Windows Firewall, that does send a real-time alert. You can try shooting the alert and check.
Disable security Messages and other system Notifications in Windows 7
http://TechNet.Microsoft.com/en-us/magazine/dd492018.aspx?LC=1033
Important: Select the security settings, once you have done to solve the problem.
You can also check the parameters of Panda IS 2012 to allow the automatic update and other necessary parameters.
To try to update manually, follow these steps:
un) right-click on the icon of Panda Global Protection 2012 on the taskbar
(b) in the menu that appears, click Update to start the process
-
does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?
If someone help me I thank a lot.
Hi belizariocruz cruz,.
· You receive an error with the message code?
· What is the operating system installed on the computer?
This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.
Note: The following can be used for Windows Vista and Windows 7.
Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.
a. Click Start, type services.msc and press to enter.
b. double-click Security Center, click on tab log .
c. Select "this account" click on the Browse button, type Local Service and click ok.
d. type the password and confirm the password and click ok.
Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.
Microsoft Safety Scanner - free online tool for PC health and safety
-
Unable to turn on my automatic updates in Security Center
* - Original title - in regards to a new alarm when I turn on my pc and I made a few simple steps without success? Ahhh Grrrrr
Why can't I turn my automatic updates in Security Center, even if she keeps alert to me?
Hello
1. What is the brand and model of the computer?
2. you make changes to the computer?
3. what happens when you try to activate the automatic updates? You get the error message?
4. you have installed Service Pack 3?
Method 1.
You can follow the steps from the link below: you can not turn on automatic updates on a Windows XP Service Pack 2: http://support.microsoft.com/kb/916261
Method 2.
How to change your settings to automatic by using Windows Security Center updates: http://support.microsoft.com/kb/875349
I hope this helps.
-
I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on. What should I do?
Hello
· You have a third-party security software installed on the computer?
· What is the error message that you receive the error code when you try to turn it on?
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed on the computer?
Follow the methods below:
Method 1:
Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:
a. click on start, click on run
(b) in the Open box, type services.msc
c. on the right side of the window, locate the Security Center service in the list of services.
d. right click on Security Center, and then select Properties.
e. in the drop-down list startup type, select Automatic (delayed start).
f. under service status, click Start.
g. click on apply, click OK, and then close the Services window.
Method 2:
Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
-
Windows Security Center: tells me to turn my anti-virus, even if it is on and up to date
Windows Security Center: tells me to turn my anti-virus, even if it is on and up to date?
My operating system is Vista Ultimate. My A - Virus is AVG FREE EDITION 2011. My laptop is a Hp Pavilion DV6753CI
Can you help me pleaseHi zonell217,
How long have you been faced with this problem?
This problem is inconsistent WMI (Windows Management Instrumentation) repository. Restart the WMI repository will solve the problem.
Follow the steps described in the article below, which deals with a similar question
Impossible to activate the application Windows Defender in Windows Vista
http://support.Microsoft.com/kb/555962
`
-
Windows Security Center service does not turn
Windows Security Center service does not turn
In the status bar on the lower right, a flag with a red cross appears. When I clicked it, a window has popped up - Action Center
He gave me an important alert to turn on Windows Security Center Service - when I pressed the button to do so, the following message appears:
Could not start the Windows Security Center service.
I tried to get help from the previously posted example from 'services' solution, but when I did it I got the following error:
One or more ActiveX controls could not be displayed because that is:
(1) your current security settings prohibit running ActiveX controls on this page, or
(2) you have blocked an editor of one of the controls.
For example, the page may not display correctly.
Help, please.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
You can try the steps suggested by Suresh in the link given below and check if this helps solve the problem.
Also refer to:
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Security Center reports of many firewall/antivirus on
Report of firewall/antivirus Norton & CA they are operational with Windows Security Center. Personally, I uninstalled CA since the uninstall program and said that Norton was uninstallled so... Why Windows have reported that they are on and working? Since then, I've decided I want to intall Windows Security Essentials and I know that you can't have all these security market and incompatible programs between them... I would be extremely grateful for any info on this...
Use the Norton removal and good CA removal tools:
http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039
http://homeofficeforum.ca.com/homeofficeforum/showthread.php?t=46
If this does not fix things, after return. MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
Impossible to get PRTSCR DEL + keys to work on the Satellite A100
I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem. However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a
-
Satellite A200-J01: problems with Chicony webcam with Yahoo messenger and MSN
Dear friends I just bought a Satellite A200-J01 with Windows Vista Edition Home Premium pre-installed on it. My problem is when I want to use my webcam (Chicony USB built-in 2.00) to have a video call with MSN and Yahoo messenger Internet, suddenly,
-
Problem of label with slider horizontal ring, CVI7.0 vs CVI7.1
-
WT210 playback of an external sensor
Hello I need help on the use of external sensor to read current in LabVIEW. Are there examples? What I did, the example of the "value of measuring Mode", I connect Config Ext sensor scaling. I don't know if it of fair or not. Any help would be much a
-
Last night I had to do a hard reboot on my "n 1730 Pavilion" due to a gel to the top. Off, he, I waited 10 seconds and tried to power it back up the computer has nothing. He responds as he is not yet connected. Any ideas?