Windows Security Center: tells me to turn my anti-virus, even if it is on and up to date
Windows Security Center: tells me to turn my anti-virus, even if it is on and up to date?
My operating system is Vista Ultimate. My A - Virus is AVG FREE EDITION 2011. My laptop is a Hp Pavilion DV6753CI
Can you help me please
Hi zonell217,
How long have you been faced with this problem?
This problem is inconsistent WMI (Windows Management Instrumentation) repository. Restart the WMI repository will solve the problem.
Follow the steps described in the article below, which deals with a similar question
Impossible to activate the application Windows Defender in Windows Vista
http://support.Microsoft.com/kb/555962
`
Tags: Windows
Similar Questions
-
Windows Security Center service does not turn
Windows Security Center service does not turn
In the status bar on the lower right, a flag with a red cross appears. When I clicked it, a window has popped up - Action Center
He gave me an important alert to turn on Windows Security Center Service - when I pressed the button to do so, the following message appears:
Could not start the Windows Security Center service.
I tried to get help from the previously posted example from 'services' solution, but when I did it I got the following error:
One or more ActiveX controls could not be displayed because that is:
(1) your current security settings prohibit running ActiveX controls on this page, or
(2) you have blocked an editor of one of the controls.
For example, the page may not display correctly.
Help, please.
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
You can try the steps suggested by Suresh in the link given below and check if this helps solve the problem.
Also refer to:
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: security alerts Windows sees no MSE
alert security Windows says I have no anti virus protection, but MSE is on and up to date. I get no error message and my updates are current.
It was the Security Center, but I rebooted and the problem is no longer. Thank you
-
I get a message telling me to switch on my windows Security Center, but when I hit the switch on the button I am informed that I can not turn it on.
Hello
You should ask this in the responses - forums for your version Windows
Windows.Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows------------------------------------------------------------------------------------------------
Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
strange questions.)Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN
Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
Also check the serices dependent as below.References to Vista also apply to Windows 7.
Start - type in the search box-> find Services at top - click right on - RUN AS ADMINCheck the default services and dependencies to ensure that they are running.
http://wiki.blackviper.com/wiki/Security_CenterYou may need to redefine ALL the Services on their default values.
Windows 7
http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989Windows 7 Service Pack 1
http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/
How to fix Vista Reporting incorrect information Security Center
http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.htmlHow to disable or enable the Security Center in Vista
http://www.Vistax64.com/tutorials/67737-Security-Center.htmlThis thread might help as it might be a permissions problem.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/====================================
To look for the Windows 7 KB and responses for Solutions (most are above).
Searck of Ko &-> 1058 Security Center
http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10Search KB &-> 1079 Security Center
http://support.Microsoft.com/search/default.aspx?mode=a&query=1079+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10I hope this helps.
-
Windows Security Center tells me that it is disable
Hello my windows Security Center keeps telling me that it is turn on and when I try to open it, a window keeps popping up telling me to windows Security Center cannot open my usual antivirus finds anything and also I tried to restore safe much earlier but it wont let me because my windows security system is out of service
Hello
Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
strange questions.)Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN
Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
Also check the serices dependent as below.References to Vista also apply to Windows 7.
Start - type in the search box-> find Services at top - click right on - RUN AS ADMINCheck the default services and dependencies to ensure that they are running.
http://wiki.blackviper.com/wiki/Security_CenterYou may need to redefine ALL the Services on their default values.
Windows 7
http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989Windows 7 Service Pack 1
http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/
How to fix Vista Reporting incorrect information Security Center
http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.htmlHow to disable or enable the Security Center in Vista
http://www.Vistax64.com/tutorials/67737-Security-Center.htmlThis thread might help as it might be a permissions problem.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/====================================
To look for the Windows 7 KB and responses for Solutions (most are above).
Searck of Ko &-> 1058 Security Center
http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10Search KB &-> 1079 Security Center
http://support.Microsoft.com/search/default.aspx?mode=a&query=1079+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10I hope this helps.
-
Windows Security Center tells me that my Anti-Spyware XP is not saved
My Security Center Windows tells me my Anti-Spyware XP is not registered and won't let me in the Firefox homepage because of spyware. Anyone having the same problem or is it a virus?
* original title - registration XP Anti-Spyware? *
XP doesn't have a program, anti-Spyware, to the best of my knowledge, unless it is MSE and who does not need to be saved. Can you get on the internet using IE?
Looks like you may have a virus. Please download Malware-bytes here , once you download and install, make sure it is updated and run a full scan of the system. Depending on the anti-virus program, make sure it is updated and run it. Then download Microsoft security Essentials, implemented to update and run.
You have installed anti-spyware program?
Let me know if this is useful,
JB
-
I use Bit Defender and Windows Security Center keeps locking things up through anti-virus and anti-spyware monituring and Bit Defender is on for it to not recognize (that is - I checked). Verification of reliability and said performance "setting up windows Security Center to stop monituring" them. How can I do this?
http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Security-Center
-
Windows Security Center does not illuminate
Just installed Microsoft Security Essentials. Windows Security Center is in stop mode and running. Windows Firewall and microsoft defender both say they are on.
Hi woodcockvet,
Do you have an error message when you enable Windows security Center?
Step 1: Run the fixit available in the article below and check if that makes a difference
You can't turn on Windows Firewall in the Security Center
http://support.Microsoft.com/kb/2271812
Step 2: Try to activate the Windows Security Center service and repair the WMI (Windows Management Instrumentation) database repository
You can follow the steps mentioned in the link below that relates to a similar question
Note: Some security software takes over Windows Security Center and uses its own Security Center.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?
If someone help me I thank a lot.
Hi belizariocruz cruz,.
· You receive an error with the message code?
· What is the operating system installed on the computer?
This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.
Note: The following can be used for Windows Vista and Windows 7.
Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.
a. Click Start, type services.msc and press to enter.
b. double-click Security Center, click on tab log .
c. Select "this account" click on the Browse button, type Local Service and click ok.
d. type the password and confirm the password and click ok.
Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.
Microsoft Safety Scanner - free online tool for PC health and safety
-
He asked me to turn on my firewall of windows Security Center. where is it?
Download Security Essentials, he asked to turn on my firewall of Windows Security Center.
Where is it on my computer?
It is a process to get an answer to a question. It would be much easier that I could call someone.
Hello
In XP, click Start > Control Panel > Security Center > Windows Firewall > Select ON > click OK.
See you soon.
-
I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on. What should I do?
Hello
· You have a third-party security software installed on the computer?
· What is the error message that you receive the error code when you try to turn it on?
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed on the computer?
Follow the methods below:
Method 1:
Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:
a. click on start, click on run
(b) in the Open box, type services.msc
c. on the right side of the window, locate the Security Center service in the list of services.
d. right click on Security Center, and then select Properties.
e. in the drop-down list startup type, select Automatic (delayed start).
f. under service status, click Start.
g. click on apply, click OK, and then close the Services window.
Method 2:
Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx
NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)
-
cant get anti virus program to turn it on in the windows Security Center
I have windows vista and an alert pops up, saying: my antivirus program is disabled. I opened Security Center says AVG anti virus reports that it is turned off. I clicked on the button, and it didn't turn it on. another box pops up asking if I trust this program click Yes, I have confidence in it. Yet once, nothing happens. any suggestions on something that I could try.
Antivirus software can help protect your computer against viruses and other security threats. Windows regularly checks if an antivirus program is installed on your computer, that they are running, and that it is up-to-date. The status of your antivirus program is displayed in Windows Security Center. However, Windows doesn't detect all antivirus programs, and some antivirus programs report their status to Windows.
If you receive notifications related to security on your virus protection software, but you know that your antivirus software is installed and updated, you can follow the steps below to stop receiving these notifications. You should do this only if you are unsure that you have a full, the up-to-date antivirus program installed on your computer and that real-time scanning, which checks every file before it is opened or used, is turned on.
To specify that you are using an antivirus program that Windows does not find
Open Security Center.
Click on protection against malware, and then, under virus protection, click on show me my available options.
In the Windows Security Center dialog box, click on I have an antivirus program that I will control myself. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Security Center displays your antivirus settings as not monitored, and you will not receive more notifications about your virus protection software.
Note
The show me my link options is not available when the Virus protection setting is marked on.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have through Trend Micro antivirus protection, windows tells me Virus Protection is enabled, but is its status as Windows Security Center in a format that is no longer supported. How can I fix this in Windows.
Hi Nancy DeVries
Have you tried to uninstall and reinstall the anti-virus software?
The problem could be linked to the current settings for the Trend Micro software. Then I suggest you to contact the assistance and control software support team.
I hope this helps.
-
I recently removed stretch your antivirus software, but windows Security Center indicates the trend the firewall is always turned on. How can I get rid of it or turn it off.
Hello
Control Panel - Security Center - How do I uninstall my Trend Micro using the Trend Micro program
Diagnostic toolkit
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxIf the problems, check with the support of TrendMicro.
TrendMicro - Support
http://eSupport.trendmicro.com/consumer/default.aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Redirects Web site and the Windows Security Center Service that cannot be turned on
I have Windows 7, 64-bit and recently whenever I click on links such as google search I have continues to be redirect to randomly selected sites. Sometimes, I have to click on the link even 10 times just to connect, I wanted to see. In addition, I have a perpetual notification telling me the Windows Security Center Service is disabled and when I try to make it back, I get a message telling me that it cannot be started. Can someone tell me what is the problem and how to fix it?
Hi Sir sniper,
which web browser is installed on the computer?
The question seems to be like a browser hijacking. I suggest you try the steps from the following links:
What is the browser hijacking?
http://www.Microsoft.com/security/resources/hijacking-WhatIs.aspxDifficulty to your browser hijacked webhttp://www.microsoft.com/security/pc-security/browser-hijacking.aspx
Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
Maybe you are looking for
-
DesignJet 130nr: canvas print Designjet 130NR
Print on canvas of sheet (13 x 19) on Designjet 130NR works very well. Called HP Support asking if there are 24 "canvas rolls that work. Told me and it makes sense, the tool can not handle the Cup fabric. Someone at - he found and printed successfull
-
Can someone check my part of information please?
I can't do my hard drive part FRU # and Description of the parts search page, then someone can verify for me please? my serial No.: T400 2764 CTO of L3xxxxx. Thank you very much! One last thing, I don't have the CD recovery comes in the box, I'm sure
-
Yellow vertical lines in streaming video
How doesn't eliminate the yellow vertical lines over streaming video?
-
How to find a record audiobook
I am a new owner of a Sansa Fuze. This is my first MP3 player. I downloaded three audiobooks from Netlibrary to my library. The books presented to OMP library in sync. Now at home, the books appear when I look on the Explorer (mycomputer\sansafuze
-
TRYING TO DO THE SYSTEM RESTORE, BUT 'NO PARTITION FOUND
I have a HP Pavilion laptop g6, which works on windows 8. I tried to do a windows system restore because my computer is having a lot of problems lately and it is less than 1 year. The fan runs constantly very loudly, computer is hot, there is a pro