Headphone Sockets does not detect not not my headphones

Similar Questions

• Before headphone and microphone Sockets does not

  Hi again. I installed a sound surround my dekstop compatible audio card and it works fine. The problem is that I have to keep changing the connections at the back of the computer when I want to use headphones. As I am a gamer and you watch a lot of movies/TV shows on my desktop, which happens frequently, and it becomes very annoying.

  How can I get the sound of the new sound card to the sockets on the front of my computer?

  This is the connector that came the sockets on the front of the office. He's not going into a slot on my motherboard, but it does not on the audio card anywhere:

  Link to photo

  Here are the different slots in connector on the sound card:

  Side 1, top view

  Link to photo

  Side 2, top view

  Link to photo
  

  2, side angle view

  Link to photo

  Thanks in advance for any help you can offer.

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Hey prophecy 28,.

  When you install a sound card into the PCIe slot on desktop is now your help for her most of the time. There is no way I know to which allows to connect your soundcard to the jacks before your turn. Cards its equipped with Sockets built into the card and should be used as they are designed. I can see how it can be annoying having to switch cables to say your surround sound system to let you Carlin in your headphones, then put it back again. I tend to leave my connected surround sound system and plug my headphones into the front sockets on my computer. Now some surround sound system equipped with Sockets for headphones you plug your headphones in too.

  If you have any other questions or there is a way I can more help please come back.

  Best regards

  Hiro

• Another problem with socket: socket does not receive the although it is ready

  Hello!

  I read a lot of discussion about the casings, but I wasn't able to find a working solution:

  I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.

  I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!

  For this I use wap2.

  5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).

  Can you give me a clue what I'm doing wrong?

  This only happens on the device, not in the Simulator!

  That's what I tried:

  -with the help of a DataInputStream (I wasn't able to find a difference)

  -using another overload of. read()

  P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.

• Windows 7 does not contact Canon MP250 printer scanner

  Tried to download drivers and software updated on the Canon, but Microsoft site not even allow them to get a foot in the door. I get the message, "do you want this program to make changes to your computer? I agree, it goes through the installation apparently successfully, and then when I try to open and use the software it brings back me to the same message.

  I tried to uninstall the software and drivers supplied with the original Canon disc by going to control panel-programs-uninstall, but it does not seem possible to uninstall completely.
  The unit never worked properly with Windows 7. Print only crashes until I got this shot of an inch with a reboot and scan has always been difficult. Now, I can't scan at all, just to get a 5,155,55 error code and message:

  "Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed. "The old trick of shutting down the computer and power off and disconnect from each other and of the socket does not help.

  On the upgrade of Explorer 8 to 9 from Solution Explorer, IE 9 recognizes any printer so I uninstalled IE 8. Then came the automatic update for IE 10 (not sure why Microsoft chose to do) so I uninstalled it and now I'm to IE 8 again. Looks like I'll have to deal with the inconvenience of an old browser in the hope that it will be more compatible with my printer as a new browser.

  To surf on the Net about it for a long time, it seems to be really popular and I was expecting to find much more information about it on this forum. I also expected to Canon and Microsoft to be a little more proactive to try to resolve these problems.

  Anyone have any ideas?

  God only knows what was going on with this Canon MP250, (which may be several years old), but I can tell you that you're NOT the first owner of Pixma to face such problems with IE9 or IE10 installed.

  If the top of the brother & running OK, paste the winner: just empty the barrel (namely electronic recycling center).

  TIP: Si Wal-Mart sells the printer, chances are you want something else (not a Wal-Mart or the other).

• Windows 7 does not detect speakers or headphones

  Hi, I have a desktop PC, which now has problems connecting to my speakers. It shows a red 'X' as shown below.

  

  I have tested it with another computer and it worked and the speakers and speakers used to work all the time.

  I also had headset that is no longer working on this computer, in fact, nothing works.

  I have uninstalled the driver and reinstalled driver and also checked if it was plugged in properly, still does not work.

  I recently spent on graphics cards in it, but I'm sure that graphics are not relevant.

  Thank you

  No, you will not have a new sound card.

  To better assist you, provide us a screenshot of your playback device. To see your devices on reading, right click on the sound icon on your taskbar, and then select the playback device.

  Forward to your response.

• Skype detects microphone does not detect but no sound through it

  Hello

  I have my headset connected to my card his and my card its connected to my PC via the USB cable. I tested with two cables different and three different ports.

  When I connect my headphone directly on the PC, everything works.

  When I connect it to the sound card, the microphone is detected but when I talk to Skype levels will not upwards, unless I'm talking really loud or put the microphone almost inside my mouth. The thing is, he works outside of Skype. I put the setting on windows to hear what the microphone picks up and I hear what I say, but it does not appear on the levels of Skype.

  Any solution to this?

  Thank you

  And apparently, the sound card has an option "noise gate" turned to 100% which, for some reason, did not allow programs capture levels. I put it completely, and even though the quality seems a bit tipsy, it works now.

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• headphone 3.5 mm jack does not properly after update iOS10

  Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

  So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

  someone at - it a similar experience or a solution?

  Hi oramicle,

  On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

  After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• My speakers does not work when I talk on the phone but when I have my headphones or have the phone up to my ear people hear me perfectly fine, please help.

  My iphone does not work on audio speaker and everything is perfectly fine, but when I'm on the phone and put my phone on speaker, no one can hear me not at all, but when I have the phone to my ear, or have headphones in people can hear me very well. I don't think it's a software problem, that my phone is updated with ios 9.3.5. Can someone help me please on this issue.

  Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again. You won't lose data.

  Have you tried plugging the headphones into an output a few times?

  Does say "headphones" when you toggle the volume and no headphones attached?

  More tips here:

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• Why my iPhone 5 Headphone Jack does not work?

  I tried to fix it but I can't, I'm running on ios 9.3.2 and my Siri does not collect my voice. If you know what is Anseer PLEASE TELL ME!

  Get a flashlight and clean up any debris, lint, etc., from the plug headphones and try again. Have you tried another set of headphones? If this is not the case, try this. If nothing like that works you will need to get it repaired.

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.