Headset sbh60 Sony can connect to Windows wireless?

Similar Questions

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I can connect to windows live hotmail, but I can't open the emails.

  "I can connect to windows live hotmail but I can't open the emails, Server error appears on the screen, but I'm connected to the internet, please help.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  According to the error you found, it may be a known issue, see the following announcement:

  http://windowslivehelp.com/thread.aspx?PostID=5785957e-6007-48a1-85c7-03170a5a4086#5785957e-6007-48a1-85c7-03170a5a4086

• The WRT600N can connect to a wireless access point?

  I installed Windows 7 on my desktop and I was not able to install all types of Linksys wireless adapters.  I decided that linking an my WRT600N wireless access point in the other room and hardwireing the office to the access point, would be a good idea.  I'm probably going to connect it to a Net WTG624 Gear, which is capable of acting as an access point and you connect to another router.  The question is, can the WRT600N you connect to and use the internet and the local access and, ultimately, on the Office of cable?  I feel that it is one of the most stupid questions, I ask myself here again, but I'm not sure.

  EDIT: I'm sure it's called Wireless Bridge.

  Thank you

  Zach

  Hello Zach,

  The WRT600N can connect at the point of access, and vice-versa. I have a WRT600N home and have the same model of NetGear as access point (what are the chances?) and it works fine, although I do miss the 5 GHz as the Access Point is only 2.4 Ghz 802.11 g Standard.

  I hope this helps!

• 4650dn: 4650dn network connectivity Mac can connect to Windows not so

  OK so my printer no longer works and I replaced the card Jetdirect-everything looks OK the Imac connects the macbook OsX 10.11 connects, but my windows 10 pC cannot locate the printer running. The imac is connected to the network that the macbook is wireless - I played with the settings of I/O but do not understand enough to make sense the-thank you

  Mac can find local printer or printers here network where windows need responsible and shared on a server to find with a search for network printers. The easy way to load the printer should print a config page and the second page will have the network settings on the printer. Use the ip address of the printer (example: 192.168.1.35) to load the printer on the windows machine. Simply use the printer to add, next and then click on the port to create and the drop down menu choose tcp/ip standard and simply follow the guests. When asked enter the ip address of the printer and click on the box to query the printer click Next and windows 10 should finish loading for you.

• Can connect to the wireless router, but not to the Internet

  Because I could not find this post, I published in my problem to

  Windows 7, connecting Local only, no Internet

  I think I described the problem a bit better here.

  I had a Gateway DX4300-17 with Windows 7 Home Premium for about six weeks. I connect to the Internet via a Netgear wireless router. My Internet connection dropped often, but I've always been able to reconnect to the Saturday. Since the start-up my computer Sunday, when I try to connect to the Internet, the system tells me that I am connected to the router, but there is no connection between the router and the Internet. I did a system restore to Friday, but it did not help. I searched the Knowledge Base and tried several things I found there. Running "sfc/scannow" indicates that all is well. I disabled the '6' Protocol (I don't remember the letters that were with this, but you probably know what I mean). This made no difference either. I thought I would ask for help here in the hopes of not having to restart the computer to the "hospital". That's a very different problem here barely a week. I need help, please.

  Hello Bill6009,

  Have you tried to boot your computer in SafeMode w/network to see if the problem persists?

  If so, try to perform a clean boot to see if you encounter the same problem.

  Please post back your results if we can help get your problem solved J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can connect on Windows 8 without using a Microsoft account?

  Original title: connect

  Is it possible to change the way that I connect to my computer windows laptop 8?  I have connected it to my Microsoft account, but would rather connect locally with a simple username and password.  If I don't have internet access, I can not access my laptop.  Please notify. Thank you.

  Hey Watson,

  You can create a different local account and then connect to the computer using the same when you don't have Internet access on your laptop.
   
  You can check the link to create a local account that you can use to connect to the computer:
  "Create a user account.
  Follow the section "create a local account.
  http://Windows.Microsoft.com/en-in/Windows-8/create-user-account
   
  Let us know the status of this issue.

• WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT

  My Sony VAIO E Series windows wireless service does not

  the computer says that

  Hi Isabel,.

  1. Exactly when you receive this message? It's trying to access wireless internet?
  2. What is the exact model of your PC laptop Sony Vaio E series?

  Make sure that the laptop wireless switch is turned on.

  Method 1:

  Please follow the steps to start the WLAN service.

  1. Press the Windows key and R together to open run prompt and type services.msc
  2. Select the autoconfiguration WLAN service in the list, right-click on properties
  3. Change the startup type to automatic
  4. Click the Start button
  5. Click on apply, Ok.
  6. Restart the computer and check if it works.

  If the problem persists, proceed from the link below to fix this problem.

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• How to remove or delete network domestic (not homegroup) so that I can access and connect to our wireless network.

  I have Windows 7 and it is connected to the network via a home network (not homegroup - that is not disconnected).

  We have a set up wireless network and the other computer, tv, xbox, cell phones, tablet, that all were connected successfully to our home wi - fi configuration. My Dell windows 7 is always connected through an old home network of a previous wired router. How in the world I remove, delete or otherwise change the settings so that I can connect to the wireless network. My computer does not even list or recognize the wireless network. Help, please. I looked and looked and can't find anything to help me.

  My computer does not even list or recognize the wireless network.

  If your machine does not list the wireless networks, this is caused by one of the following:

  • There are no active of nearby wireless networks.
  • The machine doesn't have a wireless adapter.
  • The wireless adapter is disabled.
  • The wireless adapter is disabled. Most laptops have a switch or some facility keyboard to turn off the wireless network card.

• the officejet pro 8600 can connect more than one wireless router?

  the officejet pro 8600 can connect two separate wireless routers?

  Hi Thetinman,

  No, it is not possible that you can be connected to 1 router at the same time.

• Can connect with desktop remotely all directions except via internet Windows XP to Windows 7

  I have a new computer with Windows 7 Pro to work I need with desktop remote access so that I can work from home and be with the family.  For years I used remote desktop connection from home using Win XP SP3 to my Win XP Pro SP3 computer at work.  I am able to connect my old WinXP computer work on my new Win 7 computer (locally).  I can connect from home computer Win XP Win XP computer via internet (DSL) to work.  I can connect from Windows 7 computer to work at Windows XP home computer over the internet (DSL).

  So, I have Setup port forwarding or modems DSL correctly, the IP addresses are correct, consistent remote desktop clients. Firewall exceptions are configured correctly.

  What is different.  The new computer with Windows 7 Pro has McAfee Internet Security all others running EAST of Kaspersky.  Win 7 computer is new.  Since I am on various possibilities of connections, changed listening port of 3389 on some computers, including the new Win7 computer (this should not be a problem that I'm able to connect locally).

  Disable the firewall (software Anti-anti-virus/IS) on both computers does not help. In any case, I can go to WinXP Pro to work on Win 7 computer to work locally.

  My thought is that there may some security policies, or maybe a protocol problem which is different with the new Windows 7 computer that does not have a connection outside the local network (via a public network).

  I also tried to set up a VPN connection integrated Microsoft: forwarded port 1723, the GRE protocol allowed to the DSL modem.  Tried all different scenarios between Win XP Home and Win 7 computer at work and cannot configure the VPN connection. I get error 678: the remote computer did not respond.

  I spent hundreds of discussions help/knowledge base and discussion review.  I have seen or followed all the instructions on the various sites of tech Web to configure VPN connections and Remote Desktop connections.

  Does anyone have an idea as to what could be the solution here?

  Hello

  Please post your request in the Microsoft TechNet forum, where experts on this platform can help you with the problem.

  Please see the link that will take you on the TechNet forums below:
   
  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• my computer dell laptop was connected to my wireless router, and now the connection is broken ittslef

  I have 2 computers connected to my router wireless #1 is a new satellite Toshiba 2010 and has no problem connecting...

  #2 is a an old dell Latittude D 520...

  It was working fine and connection with a problem and now does not connect to the network...

  I tried the WiFi wireless lan utility Dell and MS WZC... without success...

  The network is no more be authenticated...

  And it does not acquire the network address...

  When I select the icon for network address, which was there before. is now defunct.

  My icon Dell said acquiring and my router icon indicates authentication...

  Then, login unavailable...

  Hello

  ·         You receive an error message or error code?

  ·         What service pack is installed on your computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you read the article knowledge base Microsoft and check below.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

   

  Method 2: You can also read the article and check if you can connect to the wireless router.

   

  You cannot connect to a wireless network access point that uses authentication shared from a Windows XP-based computer or a Tablet PC Windows XP Tablet PC 2005 Edition

  http://support.Microsoft.com/kb/884787

  Let us know if that helps.

• no internet but not connected to the wireless router

  I have 400 SL with windows vista installed.
  Everything worked well for years, until a few days ago.
  It is the symptom, and what I've done:
  1. the laptop CAN connect to the wireless network, no problem, very strong, just signal has no internet.
  cannot ping google.ca.
  In network and sharing Center:
  Computer---> network---> Internet
  ^                   ^
  |                     |
  Red Cross OK
  2. all other devices (iphone, ipad, other laptops) can connect to the network and internet.
  3 did a system restore on the eve of this stoppped working. always the same.
  4A bought a wireless adapter, always the same. but it works fine on the other laptop
  5 tried to set a static IP, subnet mask, gateway, still the same problem.
  6. any other device can ping each other with the exception of this laptop...
  7. the seller cordless tool is uninstalled (Lenovo connection management tool)
  8 rebooted a million times between all the steps
  9 safe mode with network has the same problem.
  10 tried to use other wireless, still the same problem...
  need help...
  Thank you
  -Virginia

  Hi Virginia,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the problem, I understand that you can not connect to a wireless network on windows vista computer.

  I appreciate your efforts on this issue, however no need for you to worry we are here to help and guide you in the right direction.

  Help me with the information below.

  -Don't you make changes on the computer before this problem?

  I suggest you to disable temporarily security software and then check if you are able to connect.

  Method 1

  You can also temporarily disable the security software and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  Method 2

  Reset the router and see if that helps.

  Note: to help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  You can see this help article.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring