Hearing does not open

Similar Questions

• Hearing does not open. Other programs of the suite creative open very well. In the first 2 seconds of the opening, I get an error message which has not stopped hearing & Windows needs to close. Tried rebooting twice without success. Any ideas?

  The hearing is uninstalled and reinstalled. No help. Still does not open.

  dougoshow wrote:

  The hearing is uninstalled and reinstalled. No help. Still does not open.

  Did you delete your preferences when you did? And if you start hearing with the SHIFT key is pressed, what is happening?

• Hearing does not open mp3

  Hello

  I'm going crazy. A lot of my mp3 files do not open with Audition 3.0.

  Hearing has 3 ways to do not open their:

  1. just do nothing and do not give an error message

  2 error: file not supported, raw data

  3. opening a dialogue to convert data by choosing the bitrate etc.

  Do I did wrong. There is nothing wrong with mp3 files. In fact it will open in SoundBooth properly.

  Please help me.

  DappreStrijder wrote:

  Any other suggestions?

  Not really, no. It works very well here, and if it was a bunch of generic problem of people would have said it, and they did not. So, something on your machine is this screwing, but without having in front of me, I can't tell you what it is.

• Hearing does not open a new file and displays "one or more files treat active jobs. Please cancel these jobs or wait for them to end. »

  Any thoughts on what may occur? Everything was fine, but I have nothing will change its state of 'spirit '.

  Hi again, problem solved... I rebooted and it works again, so I presume it was a temporary problem at my end. thank you for your help!

• does not open on the screen from the taskbar.

  I have windows 8. Firefox does not open on my screen. I click the icon in the taskbar, it works, but there is nothing on the screen. When I go on the task bar icon the thumbnail indicates above, then when you click on it, it disappears. You can close the nail of the thumb. That's all that happens. Explorer and Chrome load without problem. I hope you can help with this problem because I use Firefox as my main browser.

  Thank you.
  John.

  Hi John,.
  I'm sorry to hear that when you open Firefox, nothing appears on the screen, but if you place the cursor on the task bar that one windows open can be closed here. You can click on this window to maximize the window that opens?

  What has been recommended in the past is to delete the Firefox profile localstore file, as now corrupted [kb.mozillazine.org/Toolbar_customizations_reset_on_startup]. However, a simpler solution may be reset Firefox starting mode safe it. If you hold down SHIFT and click the icon of Firefox you can do. Questions to troubleshoot Firefox in Safe Mode , reset the profile of this menu.

• By clicking on icon FF does not open browser. Must click right-new window

  FF does not open when you click the icon. I have to right click and choose the new command window. It does not bring the browser when minimizing.
  System: Macbook pro, mavericks,.

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• Change of privilege HD now Mac Mail does not open

  Couple of questions, self-inflicted:

  I changed the privilege HD read-only for everyone no access and then click on "apply to the included items. I released on bail after a few minutes, change my mind with a reboot. I now get the re-boot, the pop-up "library should be rebuilt to open applications. I keep having to enter my PW for this.

  In addition, Mac Mail now does not open. It is a big problem and I don't know where to start.

  I repair permissions. Is there an easy way to return to the previous default permissions and privilege by default to make things work as they were before?

  Can you make a different Get Info and change everyone else read-only?

  First try and see if that fixes the Mail. If this is not the case, here are a few ideas more troubleshooting.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Satellite L500-126-CD/DVD drive does not open very well unrolled

  Hello

  I just got my second Satellite L500-126.
  I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

  Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
  Is this normal?

  Also, when I close the dvd player, I hear a little noise "ping!"
  Like a spring, or something. Is that also normal?

  Thanks in advance.

  Hello

  I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
  This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
  Still, you will hear a short click Open and close the drive.

  So I guess it's ok.

• defective disc - drawer does not open

  I could only download a disc because the door to the drawer does not open. When I try to open I can hear sounds as it tries to open but nothing happens.

  Do you know anyway I can open it through the computer or I'll have to go back to the door fixed?

  Hello bethbradley,

  This problem may occur if the CD/DVD drive is gone bad. I suggest that you try to eject the disk using by resetting the drive. You will find a small hole in the drawer of the DVD, you can insert a PIN to reset the player. This allows you to eject the disc. If it does not, I suggest you contact the manufacturer of your computer to check if the disc is damaged.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• recovery system does not open

  When I click on the recovery of the system, it does not open.  I am running windows xp professional 2002.  I tried to update, but it freezes when trying to install the program active x.  I tried to run it, rundll32.exe advpack.dll, LaunchINFSection % Windir%\Inf\sr.inf too, but I don't have the disk to install xp service Pack 3.  I think it was a downloaded update so no disc.  If at this point, there is no way for me to do a restore of the system if necessary and no way to get the updates even if they are set to auto.  I also scanned for a virus that found nothing.

  Hear you the system restore will not launch at all or it does not start, and you see just a blank white screen where the calendar should it be?

  It is not difficult to reinstall the system restore (not reinstalled XP - only the part of SR), but to see how this other idea it works.   Reinstall SR will destroy all your old Restore Points and leave you with an another fee.

  It is easy to reinstall the system restore.  Here's how:

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.

  If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to c:\windows\inf, and right click on the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall SR because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where it is, let waiting for installation and click Start, search, then search for the requested file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  If you still can't find the files, let us know what is the file you need and someone can download on his SkyDrive and you can download it.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  If asked:

  xrstrui.exe

  Point installation c:\windows\system32\restore

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  Now is the right time to test your system restore process, from one end to the other.

  The day that you think you have need of system restore is not the day, namely that it does not.

  Reboot your system and without anything running (no browser, Outlook, etc. - just the basics), manually create a new Restore Point, restart your system and see if you are able to restore your system to the Restore Point, you just do.

• Audio plugin Manager does not open

  work on win 7 64 bit w audition cs6

  Audio plugin Manager does not open

  therealdobro wrote:

  Uninstall/reinstall?

  Not necessarily... try to start the hearing with the SHIFT key. It is possible that preferences have been corrupted.

• Final Cut Pro 10.2.3 does not open a library more!

  Hey! I could really use to understand this, a total mystery for help:

  This morning, I tried to open a library of Final Cut is saved on my hard drive. Last night, I worked with the library, but now it just opens up.

  It gives an error: Final Cut close unexpectedly

  It's just one that does not open it opens other libraries.

  Also, I tried to open it on another computer, but here it opens either.

  I tried Trashing FCP to the preferences Manager, made a first aid attendant, but it seems that the problem is in THE LIBRARY not in the program.

  In addition, NONE of the backups open.

  Any ideas? ;)

  Thank you!!

  Try to open the library of most recent backup.

  By default, they are stored in Final Cut backups in the folder sequences.

  Russ

• IPhone does not open messages, phone or contacts

  Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

  Tincho94 wrote:

  Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

  Press and hold home/sleep set button until you see the apple logo and then release, then wait for the boot device upward.

• Preview does not open

  Preview does not open suddenly.

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to preferences.

  com.apple.Preview.LSSharedFileList.plist. bring the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

  If this does not work, perform a backup.

  Leave the preview.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Delete the following text. You won't find all. Restart and test.

  Containers/com.apple.Preview

  Containers/com. Apple.QuickLook.UI.Helper

  Preferences/com.apple.Preview.LSSharedFileList.plist

  Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

  State/com.apple.Preview.savedState request registered

  Linc Davis credit for this solution.

  Overview of reset of the automatic download solution - part 3

• Crossword NYTimes app does not open.

  After installing the update of yesteday app, the app will not open. It flashes on the screen of crossword briefly, then disappears.

  Hi, snevets2!

  Thank you for reaching out in the communities of Support from Apple. From your post, I understand that you recently updated the third party, NYTimes crossword puzzle app, and it closes unexpectedly when you try to open it. I use a lot of different applications on my own iOS devices, so I know it's important so that it opens as expected. I'm happy to help you.

  I recommend using the procedure described in the following article, that will help solve the applications you have installed on your iPad, when they behave as expected.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Have a wonderful day!