hearing of 5.0

I already have this software but I want to download on my new Mac. I can't find a link to the hearing 5.0.

Available downloadable Setup files:

Download and installation help links Adobe

Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

Tags: Adobe

Similar Questions

  • IPhone 7 people cannot hear me very well on voice calls

    People can't hear me very well when talking on IPhone 7. I can hear them perfectly but they say that my volume is very low

    Hi there johnty53!

    Welcome to the communities of Apple Support and thank you for bringing your question about the quality of the audio calls on your iPhone 7.  Being able to be heard on the calls is certainly of the highest importance so I'm happy to help you today.

    I understand that you have a brand new iPhone, but I have some things that we can test first to make sure that nothing hinders the microphones.  Also, you'll want to make sure that 10 iOS is updated, updates may have software patches to improve the functionality of your iPhone.

    Update your iPhone:

    1. Open the settings app.
    2. Settings > general > software update.

    Please also ensure that your carrier settings are also updated:

    1. Make sure that your device is connected to a Wi-Fi or cellular network.
    2. Tap Settings > general > topic. If an update is available, you will see an option to update your carrier settings.

    Get help with microphones on your iPhone, iPad and iPod touch

    Take care!

  • Why can't Siri hear me in the Sierra of MAC OS?

    I installed OS Sierra on my desktop MAC, Siri active, adjusted his in Preferences, but Siri still can't hear me. What should do?

    Open system preferences > Siri then make sure: internal Microphone is selected from the input Mic pop up menu.

  • Can not hear

    Have a 6 s, iPhone running iOS 10.0.2. Meet callers hearing bad, its cutting, however when I place calling on speaker, all right. All other functions of the phone seem to work very well. All applications are closed, the Bluetooth feature is turned off, nothing in the sockets and have restarted phone. Any suggestions to fix this problem?

    Hello

    Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

    If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support

  • Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

    I use the Oticon Streamer Pro 1.3 to connect my hearing aids to my iPhone 6 more via bluetooth.  With the IOS 10 update the streamer keep disconnection, reconnection and disconnect.  I tried forgetting the device and once again pairing with the iPhone.

    Hi, Dick

    I have similar problems with my hearing aids Starkey.  iOS 10 broke the bluetooth.  I've been working with Apple, he's broken, no solution until the next update.  Incidentally 10.0.2 is not the solution

  • 7 adapter w/lightning iPhone headphones. The caller does not hear me

    When I make calls or receive, the person at the other end of the line can't hear me but I can hear them.

    In this case more than 50% of the time until now, in fact I would say more like 75% so far. Sometimes its fixed by pulling me on the adapter of the lightning and put it back in the phone.

    Today, I put through a few tests in-depth using three different sets of headphones and had the same problem with all of them.

    Anyone else having this problem?

    I'm having the same problem also. Pulling on the adapter of the lightning and reintegrate them into the port seems to solve it, but then happens again next time you receive a call.

    I used two different sets of headphones with the same results.

    The remote control also do not work and can not adjust the volume of the call.

    Assuming that he is part of the issues that have been reported and will be fixed in the next update?

  • I don't hear Roland 501 Piano during playback when recorded in Logic Pro.

    When I record my 501 Piano from Roland in Logic Pro, I do not have the piano through my speakers to read.

    Create an external midi track

    in the way - (port) Inspector to ensure that Roland is selected and all midi channel.

    When you reproduce the track it is routed to the 501.

    If you don't hear it - make sure that Roland is configured to accept midi in reading

  • Tap to hear the time function does not work

    I can't tap to hear when mickey or Minnie faces to work

    I have the latest versions of software on the phone and watch I toggled the function works and have re-matched my watch to my phone, but it still does not.

    Hello

    I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

    My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere between 3 and 5 hours, but you can see he started working earlier than that.

    It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

  • My speakers does not work when I talk on the phone but when I have my headphones or have the phone up to my ear people hear me perfectly fine, please help.

    My iphone does not work on audio speaker and everything is perfectly fine, but when I'm on the phone and put my phone on speaker, no one can hear me not at all, but when I have the phone to my ear, or have headphones in people can hear me very well. I don't think it's a software problem, that my phone is updated with ios 9.3.5. Can someone help me please on this issue.

    Force restart the phone now sleep and home for 10 seconds, button until the Apple logo comes back again. You won't lose data.

    Have you tried plugging the headphones into an output a few times?

    Does say "headphones" when you toggle the volume and no headphones attached?

    More tips here:

    If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  • My phone, when I try to call, the volume seem to be so slow than normal, what happens after I have updated my phone, whenever I wear my scarf that I barely hear anything... Any solution? Thanks in advance

    My phone, when I try to call, I could barely hear the voice of the speaker, even turning on the Mono Audio, I rebooted the phone but nothing, this problem occurs after I updated the ios 9.3.5 aka the recent, so any solution pls response asap thx in advance

    Hello, dzharun!

    Thank you for joining the communities Support from Apple! It seems that you encounter to the appellants the hearing in question on your iPhone. I know how important it is, you are able to hear callers. Restart the phone and adjusting the audio are very advanced! Read this article If you hear not a person on an appeal or a voice messageor if the sound is not clear on your iPhone. Since you have tried reboot, find out exactly as follows:

    Turn off the receiver

    The receiver of the iPhone will not work properly if it is blocked or dirty.

    Follow these steps, after each:

    • Make sure that nothing is blocking the receiver, such as a case or a movie.
      If you have a new iPhone, remove the plastic on the front and the rear of the unit.
    • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
    • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else.

    Also, check out this article with links to learn more: get help with hardware on your iPhone, iPad, and iPod touch features. It has links to articles for several steps to help with issues with the receiver and the speaker.

    See you soon!

  • MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

    MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

    Try this restart your iPhone, iPad or iPod touch - Apple Support

    If this does not work, it may be a hardware problem.

    Hope this helps, good luck to you.

  • I turn on my i mac I can hear it from, but remains a black screen

    I turn on my i mac I can hear it from, but remains a black screen

    Try the help in this article to support > on the screens you see when you start your Mac - Apple support

  • I just got an iPhone SE. But when I make a phone call, that I don't hear so good. The volume is all

    I just got an iPhone SE. But when I make a phone call, that I don't hear so good. The volume is. How can I fix

    Did you remove the plastic that covers the face off the iPhone when you buy?

  • People cannot hear me when I call the iPhone 6

    Hi all

    When I call people from my iPhone 6 they heard me not talk at all.

    If I put the phone on speaker, they can hear me and I can record and playback voice memos with no problems at all.  I tried both a hard and soft reset which none has solved the problem.  I removed the cover and tried to call someone without him, but the problem still happens so this isn't my case interfering with the microphone.

    Anyone have an idea what might happen?  Would it be a problem with iOS 9.3.4 because the problem only happened since I updated to it AFAIK (though this could just be a coincidence)?

    Thank you very much!!

    Get help with microphones on iPhone, iPad and iPod touch - Apple Support -> check this. If the problem still persists let me know

  • that fact view Reader in firefox? I can't wait to hear the Forum thank you.

    that fact view Reader in firefox? I can't wait to hear the Forum thank you.

    Hello

    You can read all about Firefox reader discovers in this article.

    I hope that this helps, but please come back here if you have any questions.

  • Hearing sound stops when it is used with the iPhone

    Using sound Linx 2 hearing aids. They are matched correctly with the iPhone (worm 9.3.3). When receiving or phone call, right aid will report the outage battery and closed. Resound app shows the phone id psired AIDS both all-around and IPHONE. Good help is dead unless I open & close the door a few times the battery OR if I do nothing, the 'start-up' bongs departure once a period of time and assistance is working again. Same scenario will happen if I'm lonely playoing on iPhone. Less than a minute the right help will give its battery failure and close. These problems have existed at least two previous versions of the software on iPhone. Does anyone have any ideas or suggestions?

    There could be something in this article to support that can work for you > use to aid hearing - Apple iPhone supported

Maybe you are looking for

  • iTunes and iPad photo

    I need to make room on my iPad and I was wondering if iTunes back up photos from my iPad so I can delete them later.

  • change the frequency of the signal during execution

    Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls someone help

  • driver video vga compatitable - needs an update

    video driver not in the list of hardware, you update the drivers from whedre. Click on a photo, but not therfe.  help, I am tiredx to ask for help and either find or get an answer. Kat nash

  • Creating cloud - no connection

    I am aware that I'm not the one with this question, I've read tons of discussions on the forums here and on the web. Nothing has solved the problem. I have CC Photoshop and Lightroom on Windows 7 (no router, no local network, no proxy). CC desktop ap

  • Model Windows

    Hi guysI created a model of windows, and I want to be able to deploy in another cluster. I have some developers, and they use on different cluster, I want that the developer can only deploy the windows template without changing the content of the tem