Heel 32 bit protection

Similar Questions

• ReadyNAS probably 3-series

  Hello

  I plan to upgrade my ReadyNAS Duo which has served me well for 5 years running 2x2TB in Raid 1.
  Consider buying 2 or 4-Bay (or even 6-Bay hope not) NAS and it's for home use with small office.

  I have questions about the advantage of the separation of the data on different disks
  or more software division in volume and proportion of providing enough separation.

  In general, I need on the NAS for years to come
  A: Archived data - photos, media, etc. - accumulate by the time thread doesn't change - about 1.5 GB more
  B: Backup of Mac-3-4 - need about 1-to - change as do backups
  C: shared folders in LAN - need about 0.1 to - change a lot
  D: shared folders externally on internet with corporate clients - need about 0.2 to-change much
  -need for encryption and security
  E: - web page - TB 0.01 or if - need for security of the internet etc.

  Today I have A - C only, but consider expanding the use with D and E with the new NAS
  The old Duo likely will be the new backup destination.

  Questions (after reading briefly to the Readynas software manual 6.2):

  (1) allowing the protection bit decay is mainly interesting for A and possibly B
  If this was typically 2 diska raid1 and physically separated from the other 1-2 disks (for C - E)?
  Hear that maybe he should not be activated when the data changes all the time
  because that would lead to the fragmentation of the disk, but I may not understand it.

  (2) the activation of the encryption for a part D (for business sharing via internet) is it possible? and if yes
  recommended only for a disk full? or with a separate volume on a disk enough
  who is otherwise not encrypted?

  (3) security against non friendly internet access. Look for a web page or two on the NAS
  but worried for what it opens to attacks from outside. This help in any way to
  get that stuff on a separate drive? or enough separate volume?

  (4) I know that the volume can be split on shares and each action can be password protected
  and if I actually work today. Is there an advantage to divide more physical on separate disks
  or part of separation is enough? If a system of 2 bays with units of A - E would do anything
  the same integrity, security, performance?

  (5) I read in this performance drop checksum and inauspicious rot protection manual.
  If I have I have 2 drives configured raid1 and divide it into two volumes with checksum and bit-protection
  activated and the other will be without, they have then different performance? Or I have to
  have the volume without checksum and bit-rot-protection on a separate drive for the performance gain?

  (b) same question for the fragmentation of the disk?

  (6) the last question is the limitation to 4 TB 3-series disks one hardware or software, i.e.
  a future upgrade of the OS 6 will open for larger disks?

  In General, I think not performance is an issue. My focus is mainly on the integrity of the data and
  Internet security so I opened to access internet option D and E above.

  The questions cover a wide range and would also appreciate a partial answer.

  Thank you

  You could put a suggestion in the Feature Request & Feedback sub-forum.

  You can also make a request to rnxtras.com (not a site of netgear)

• Windows Installer is not installed correctly during the installation of programs

  I tried all solutions above, but without success.  I can't update Windows, Safari, Skype, Overdrive media, etc.  I have a PC operating windows Vista 32 bit, protection of Trend Micro.  Installer 4.5 Fix is not, for some reason, my and all address configuration downloads respond with a message "does not apply to my system.  This situation occurred last month.

  No matter what I try just doesn't work.  Why?

  Thanks in advance.

  Hello

  1 did you changes to the computer before the show?
  
  2. Once you often get this error message?
   
  3. What are the steps that you have tried to solve this problem?
   
   
   
  Method 1:
   
  I suggest you perform the steps described in the document:
   
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
   
  Method 2:
   
  If the problem persists, turn on your computer in a clean boot state and check the issue
   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  I hope this helps.

• There are invisible files of > 100 GB C:\Users\B folder... \AppData\Local\Microsoft\Windows: how to remove and release this space?

  There are invisible files of > 100 GB C:\Users\B folder... \AppData\Local\Microsoft\Windows: how to remove and release this space?

  Explore it has been configured to show hidden files. Files can come from files continuously from the satellite receiver via WiFi with windows media player.
  Windows 7 premium 64-bit, protection against viruses,... with microsoft.

  To study disk space, use download and install Treesize (freeware).
  https://www.Jam-software.de/customers/downloadTrial.php?ARTICLE_NO=80&language=en&PHPSESSID=6odgempt76un9q9nkj7luf5be0

  Information about Treesize

  http://www.Jam-software.com/treesize_free/

  When you open Treesize scan select in the Menu and you will see a list of drives. Click on C and it will generate a list of files. Display names and 6 larger files sizes and the total at the top of the list.

• Configuration of San - data store have more than 1 LUN

  Hello

  We look at our San configuration for improvements. Our San has about 10 TB total.

  We currently have 6 LUN 1.5 TB all which are enclosed in 1 store 10 TB data

  It was suggested that we should NOT combine multiple LUNS in a data store for the reason if 1 LUN goes wrong then the entire data store is non-refundable.

  Although our SAN LUNS are created on top of raid 6 and are therefore a bit 'protected' by councils LUN 1 data store is interesting

  Does anyone have ideas to share?

  Thank you

  Tom D

  I would say that having a single data store, regardless of the underlying storage architecture is probably not a good idea.  Although this configuration is authorized you can paint yourself in a corner fairly quickly.

  1. one wonders about the maximum number of VMDK you should have by the data store.  http://communities.VMware.com/message/944120  Basically the more s VMDK on the SCSI data store more blocking of activity taking place on the disk, causing performance problems.  Each VMware engineer, I've talked about seems to stay around the VMDK 20 a range of data store, but that could change with vSphere.

  2 - How this data store backup and how long does it take?  What happens during a restore scenario?  10 TB is plenty of space and could take some time for the backup.  If you push it on tape and you must always restore the together 10 to it could take weeks or months.  This space by breaking into warehouses of smaller data gives you smaller segments of data that you can restore in case of disaster.

  3 - the number of data warehouses you have is very important if you are always looking to implement the Site Recovery Manager.  SRM relies on your storage device to replicate data between the sites.  There could be serious consequences on the rate of change of the data for a single LUN 10TB.  If you are moving in several data stores that it will make it easier to handle your recovery plan.

  Apart from the considerations above of VMware. I guess 7 performance LUNS in RAID-6 is not so great.  You have a lot of protection, but you pay for it with capacity and performance.  If you went to 10 stores of data and the LUN 10 you can change RAID settings at each data store to optimize performance, protection, and capacity.  For example 4 LUN RAID-10 high performance DB apps and 6 LUNS to RAID-5 for the ability.  With smaller LUN and data warehouses a disk or LUN failure will affect only a smaller set of services rather than your entire data center.

  In short, unless there is a really compelling reason to go with a single store of 10 TB database, I recommend you to change your architecture.

• Satellite Pro U200 - need drivers HDD Protection & footprint of VISTA 64-bit

  I have toshiba Satellite Pro U200 [Greece] and I need drivers for fingerprint utility and disk protection hard can you help me? It is very important too me.

  I think that gives you about boyfriend chance seems Toshiba 64-bit tools and drivers at the moment unfortunately, nothing to see :(

• I can't find drivers for 64 bit Vista Protection disk for Tecra M5

  I can't find the vista driver 64 bits for the hdd protection modul, when toshiba update all the drivers for the 64-bit operating system?
  It's amazing, that no support 64-bit for tecra M5 and the machine has a 64-bit processor.

  I hope that the quick news, thanks a lot

  Abel manzanera
  University autonomous of barcelona

  You are right. At the moment there is no support for Vista 64-bit, but it will be supported in the future. I phoned with guys from Toshiba which cares about notebooks in my company. He told us that Vista 64-bit support should begin this summer.

  We'll see when drivers will be available on the support page.

• Satellite A500 PSAM3A - how to get the HARD market under Vista 64-bit disk Protection System

  Hello

  I would like to know how to get the HARD drive Protection system up and running under Vista Home Premium 64 bit operating system. I downloaded the program 64 bit of Toshiba for this program and install it I tried but doesn't seem to work. I have uninstalled and try to install the program, but still does not work.

  Unable to find the problem, why it won't work. If anyone knows how to solve this problem it would be a great
  help for me. If anyone knows how to solve this problem please answer me as soon as possible.

  Thank you for your time.

  Kind regards
  Nigel.

  Hello!

  What you downloaded exactly on the Toshiba site?

  As written Akuma you must install first added value Package you will find also on the Toshiba site. Check this box!

  An interesting thing: it does not work if you are using the preinstalled operating system? It should have everything installed for your laptop.

  Good bye

• Bit Rot Protection and home folders

  Rot bit of protection can be activated on the House in OS 6.4 records? Unlike shared folders, there is not a checkbox to turn on protection from decay of the ILO on the records of the House.

  I replaced a ReadyNAS Duo v1 with a RN312 in a RAID 1 configuration year last for home use. I only use the RN312 for backups of the user, and these backup files are written in files in the users home folders. I then use ReadyNAS Vault to provide an offsite backup. I want to activate the protection by bit decay since many of the photos and the music files in these incremental backups are static. Maybe, I need to create shared folders, and then adjust the permissions to only allow access by individual users?

  The folders have the option of bitrot protection enabled at all times. The 'Protection' option you see for individual users is the option of snapshot for this specific user.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Link to the installer back to the only links of Windows 32 - bit en heel

  I am trying to download the installer for 32-bit Windows from this page offline:

  https://www.Mozilla.org/en-us/Firefox/developer/all/

  However, the link for English (United States) always connects to a stub Installer and not one full installer like any other. Would it not possible to get an updated link to day?

  Thank you!

  You can find the latest version ON the Mozilla CDN server:

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/firefox/nightly/latest-Mozilla-Aurora/

• I recently downloaded free edition of 10-bit Malware Fighter but virus protection is set to "stop".

  Said Action Center my antivirus (Windows Defender and Malware Fighter) applications are disabled and cannot be turned on. Is this normal?

  old_geekster wrote:
  

  Matt, welcome to the forum.

  It is normal for Windows Defender when another antivirus is installed.  It is automatically disabled.  You will need to contact the Technical Support of Malware Fighter for help on why their program does not run correctly.  They are the experts on their product.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  Thanks for the reply. I emailed you a screenshot of the 'action center-installed anti anti-virus applications', so with a little luck, they will have a solution to the problem. I get pop-ups telling me "bad cookies have been deleted", but I don't know if this has something to do with the 'virus protection' element of the package or is just an another function ' detection/removal of malware'

• HP Probook 450 G2: HP SimplePass Identity Protection - 450 G2 Windows 8.1Pro 64-bit software

  I have valid drivers installed on this machine is able to find HP SimplePass Identity Protection software for my HP ProBook 450 G2 running Windows 8.1 64bits.

  Can anyone help?

  Hello:

  For your model, you use the Client Security Manager program in order to use the fingerprint reader.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_137702_1 & swEnvOid = 4158

  If you don't want to use this program, you can try the security software simple passage of a related consumption model.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-137753-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7174370 & sw_lang =

• HP 4530 s, Win7 64 bit, Hp protect tools does not not on any browser except Internet Explorer

  Protect the HP tools (login finger Print) is not compatible with anyone except internet explore (I.E.)? Why is it not an update for Firefox, Chrome, or one of them? Please release an update or something, it seems that hp he forgets the user after the release of the software.

  to my knowledge, product software has limitation to integrate the addin for IE only, and some functions may work in firefox. subsequent products have the ability to use HP protect tools capable of many browsers - maybe not all.

• Active Protection system for Windows 7 64-bit?

  a unique software, it seems such a practice, but why it is not available for users of windows 7 64-bit? When do we expect to get out

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67046

  That should do it.