Hello all, new Member here.

Similar Questions

• Hi new Member here. you just bought a V5 74UP 591G

  never used linux before, advice before I start. Nothing in the installation booklet.

  Hello

  It is a specific model, if you want to find on the Web for example acer page, you write just V5 - 591G.

  Depending on what you plan to do, you can install ubuntu for example.

  www.Ubuntu.com

  Here's how to create the USB drive and install it.

  https://www.YouTube.com/watch?v=U-7chlCn6yk

  Just I warn you, if you have never used linux before but you used windows. Most of the applications that are on windows does not work on ubuntu, so be sure that your applications are also made for linux. They are very different operating systems. If your applications do not work on linux, it would be better to invest in a windows operating system.

• Hi all: new members here

  I never thought that I would need to use this forum because Acer products are reliable. My experience level is slightly lower intermediate, although I've been using computers since the time Atari ST.

  I have the Acer Aspire 5517, I bought in late 2009. It was working fine. I love it and want to continue using it. It was originally purchased for everyday use. I use my Acer for music production. I entered the hobby about a year after I bought my laptop. I have another more while desktop is not suitable for music production.

  By 2010, I got a virus but managed to get that ironed out. Then about 2 years ago I had another virus. A colleague was able to recover my system. Then about a year and a half ago, maybe longer that after an accident, my os is not genuine. Initaly my Acer with Windows 7 Home Premium. My colleague has said in the last accident that it has installed Windows 7 Ultimate. Then when I couldn't enter my computer laptop desk I had to system restore uese. I still want to use this laptop until I can afford a laptop faster with the best processor speeds.

  Finally, I would like to know is there a way to restore my laptop to its original (even if I could lose all my programs, which is ok) to factory settings and the os. I have the original product key but no installation disc.

  Thank you :-)

  J1M

  Acer recovery media
  If you are in the United States, you can buy it:
  http://store.Acer.com/store/aceramer/en_US/eRecovery

  If you are outside the United States, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• Hello, new Member! Q:lower power processor for IBM G41?

  Hello all, new Member here!

  A good friend gifted me an IBM Thinkpad G41(#2881) in excellent condition, and it uses a processor MHz Celeron D 2.53.

  I think it uses a processor of type "office" and wants to replace it with a smaller power, keeping the same speed, FSB, etc..

  This may be to ask the 'impossible' (I think that the CROWD support than he came with) but it can't hurt to ask, and this forum seems to be the best place to ask.

  I think there are two versions of the G41, Celeron D has a smaller MOB that hides the Pentium 4 (?), please correct me if I'm wrong.

  All suggestions are welcome, but I really need to know if someone did, (I don't have to blow a working machine!)

  Any "electronic" issues relating to these forums, I will gladly try to answer!

  Thank you for your time and consideration!

  Mark T.

  Welcome to the forum!

  All G4x series units use full desktop processors and will not accept the classic laptop processors. Power efficiency is not something they are known for...

  You will need to swap the Board to allow the use of the high-end Pentium 4 HT processors that were available on some units G41.

  Is this useful? Not in my book - and I love G series ThinkPad. In all fairness, Celeron D does nothing to sneeze, and these machines can very usable today with some upgrade in the areas of the RAM and hard drive...

  Good luck.

• Hello everyone I am new Member...

  Hello all I am a new Member and not at all an INFORMATION technology, but has good experience on the creation of commercial Web sites and exporting to WordPress with other software, can I expect to create better sites with Muse and is it possible to export to Wp, Joomla and drupal?

  Is all made websites were fluid balanced sensitive sites?

  What all available widgets? Is it possible to create a good custom panel for editing in WordPress?

  They are wrong. WordPress uses PHP technology and structure trying owner of Wordpress and the database that Muse is not supported.

• where can I buy all new macbook pro MD102 i7 8 GB 750 GB hardrive here in the UNITED Arab Emirates

  where can I buy all new macbook pro MD102 i7, 8 GB, 750 GB hardrive here in the UNITED Arab Emirates?

  Apple doesn't sell spare parts for consumers (there is a supply chain for the Apple authorized service providers)

  BUT - if I read carefully, you can ask where to buy a MacbookPro specific instead of JUST the "hard drive"?

  Apple - Find locations

  https://locate.Apple.com/AE/en/

• New Member has exactly * a * problem for a long time with system! ***

  first of all, I want to say hello to everyone... I just registered today... actually I just discovered today these forums exist even ;^>

  Features: 6 months ago I bought a HP Pavilion a6600f... I love it and have bought things for her from the beginning... find it me easy to use and * beep * hard to turn off ;^> I always check to make sure that I have the latest drivers for everything, cleaning the registry, etc..

  I had exactly * one * problem for the last few months and it's bugging me enough now to do something.

  System details: the bureau a6600f Pavilion has a Pentium dual core E2200 clocked at 2.2 GHz... I put 4 GB of memory in it, and it runs Vista Home Premium w/Service Pack 1 (64-bit).  the rest is probably not important to this question.

  QUESTION: when I opened the health security & in the hp Advisor, I always have yellow exclamation in a triangle "PC Update," and also a exclamation point red in a square under "PC Health".  both are caused by the same problem... the fact that I continue to say there is a new version of the "HP health check' and I need to download/install.

  problem is that I can't do.  Here is what I get.

  at first, everything seems fine.  He considers it, download it (it's about 13 MB), and I get the message 'the active support HP library configure your new installation of the software.  * That's * where the problems begin.  I get:

  «HP Active Support Library error: Error 1316.» "A network error occurred while trying to read him comes from the file C:\windows\installer\HP Library.msi of active support" (note: I checked and I don't even have this file present in C:\windows\installer... that's the problem?)

  then I get "roll back the installation.

  and finally, "error:-1603 Fatal error during installation."  Consult the help of Windows Installer (msi.chm) or MSDN for more information"

  so I can't update the HP health check and I still have these two errors (the yellow triangle and red square) present in HP CAW - PC Health & Security.

  I searched these forums and found a few issues related to the CAW of HP, and I understand that some people even turn off... but it never gave me a problem outside of it, and I want to keep around if I can.

  I'm sorry if this post is on the long side, but I wanted to provide as much information as I could.

  so, my name is Michael King and I hope to be a regular contributor here, and I don' t mind if someone wants to email me, although I understand problems of this kind are better publicly displayed where they benefit from the community as a whole.

  Thank you

  -MK

  Message edited by Michael_King on 05/16/2009 20:06

  first of all, I would like to thank the three of you who tried to help me with this problem.  This means that you, dmhoo29, anon, MrFixIt.  and as a gesture of goodwill, I would like to give Kudos to you, being a new Member and all three.

  you all had great suggestions, and based on these suggestions, I tried a few variations based on these suggestions.  Unfortunately, nothing has worked... She is always back to the same error messages, no matter what I did.

  In fact... HP * own * suggestion... which is essentially reproduced in this thread... does not work either.

  I had already spent hours on this ridiculous thing, and tonight I spent 3 hours on the subject.  I finally solved it, and the solution may benefit others who I see can easily run through a similar problem with other improvements... BECAUSE THE PROBLEM IS A RIDICULOUS OVERSIGHT ON THE PART OF HP that we can correct easily manually.

  THE SOLUTION

  What annoyed me early on, was the fact that I kept getting the message about the "HP Active Support Library.msi" file, which was looking for the installer in C:\Windows\Installer.  It seemed to me that the real problem was that he was looking for a file that simply wasn't there.

  Well, during my hours 3 screwing around with tonight, guess what I found?

  There's a right called "swsetup" subdirectory under the root of the C:\ drive.  and inside C:\swsetup, I found the following two subdirectories:

  C:\swsetup\sp36082 - and -.

  C:\swsetup\sp41377

  I knew of the many, many times I tried update HP Health Check that he was downloading sp41377. (don't remember the extension) via FTP from HP.  so I checked what was in C:\swsetup\sp41377 and guess what I found?  Well, a few things, but the only thing that concerns us is (drum roll please) THE FILE "HP ACTIVE SUPPORT LIBRARY. MSI!

  simply, I opened another window, surfed to C:\Windows\Installer and drag-and - drop "HP Active Support Library.msi" here (I pressed the 'Ctrl' key in order to make a copy of it rather than a civil rights movement).

  so now I had this annoying file in the right directory.  so, since my C:\swsetup\sp41377 window was still open, and since there is a file 'setup.exe' in there, I ran it.

  and the Holy Mother of God, it has actually worked.

  which means that what had happened was, when I tried to update the health check, that would create a subdirectory in C:\swsetup... in this case the C:\swsetup\sp41377 subdirectory... all he needed for the update here... and then ran "setup.exe" dump...

  . . except that the HP person who wrote 'setup.exe' forgot to include an itty-bitty statement in the code...

  to copy 'HP Active Support Library.msi' in the C:\Windows\Installer directory first.

  then pay attention to that sort of thing, my friends... If you try to update this HP wrote and that you get a 'cannot find file such and such in such and such directory' type of error msg, see if you can locate on your hard drive... maybe in C:\swsetup, perhaps elsewhere, I know... and if you find, just manually copy it in the required directory and run Setup again.  This might be the only time where HP committed this Sin right; ^ >... or even once, it cannot!

  Bravo and thank you again to all who have contributed.

  -Michael King

  Message edited by Michael_King on 05/17/2009 23:37

• Add new Member and firmware update

  Hello

  I have a group of 4 bays Equallogic

  1xPS4000 (Type: 70-0120) and

  3xPS6100 (Type: 70-0400)

  They all firmware v6.0.4

  The new table is a PS6210XV. I'm sure that the firmware of it's newer probably with a release v7.x.

  The documentation for the firmware update, it says that I have to upgrade all the tables on my group first, and then add the new group.

  I was hoping to add the new table and move some of the volumes to that one, update a table that I emptied, add back to the pool, empty one another etc etc.

  Is this possible?

  It is really not a good idea to do so.   In place upgrade is by far the best option.  If you have defined your timeout of 60 seconds and choose a period of quierter I/O, that there should be no problem.  Also, be ready for an upgrade means that be ablel to handle a failure of the controller in the case of a real problem of HW.

  First, if.  You need TO upgrade the new Member and all members of 6.0.x to 7.0.9.   The new table will come with 7.0.x since it is the minimum version for this controller.  Upgrade to 7.0.9 as well.  Create a new pool for this member and do not set the RAID policy yet.  Do not enable the iSCSI 2nd course interface.

  What disks you have in the existing tables?

  You run VMware ESXi?

• Move the user off the system disk folders? Envy of all the data on E, so need to move directories user E. not individually, but in the world. If all new users, I create will have their user and docs folder on E.

  Got a new laptop with win 7 home premium pre-installed. Using the language of win 7... I have decreased the volume of HDD to 55 GB.  Made new simple volumes. I want all the data personal on E, so need to move user directories to E. No individually change the location tab on dozens of files, but in the world. If all new users, I create will have their user and docs folder on E from the gitgo.

  Under XP, I could just change the 'My Documents' link on each desktop, go to the e. * instead of c *. *, but with win7?

  As a Windows Home Server and most wise OS facilities, the system drive is isolated and a drive of 2 or 3 for everything else.  Get a problem? Just restore the system drive.

  You need the answer?

  Thank you
  Tom
  PS Microsoft: This backup/do imaging software, why don't we name the image so many can all be stored on easily in one place without having to go and rename it or move them elsewhere?

  Hello TomZork,

  Thanks for posting on the Microsoft answers Forum.

  In another forum, I found the instructions to move folders of users to another drive.
  You can follow the post here. This is attributed to Jimmie R. Houts.

  Article:
  You can move the entire folder C:\Users to another drive quite easily once windows is installed:

  1. Boot from the installation media and access the command prompt (I think you need to click on fix everything first)
  2. Use Robocopy to copy C:\Users to D:\Users: robocopy c:\Users d:\Users /mir /xj
     a. /mir says robocopy to mirror directories, this will copy all files and permissions
     b. /xj is very important, it means robocopy does not follow the points of junction. If you forget this, you will have a lot of trouble.
  3. Make sure that the files copied successfully
  4. Delete c:\Users
  5. Create the junction pointing d:\Users: mklink /d c:\Users d:\Users

  That's all. I used this process for Vista RTM with no problems.

  Here's an article that explains as well. Just use robocopy instead of xcopy as it does in the article in order to avoid possible ntfs permissions problems.

  Update: because I discovered the hard way, I thought I would mention also that if you plan on switching "Program Data", or "Program Files" with this method, you will be disappointed to know that everything works as expected, but the windows updates will install is no longer. I don't know if this problem has been fixed in Win 7.

  With the foregoing, it is not a Microsoft forum or Web site so you will have to use at your own risk. I also recommend to do a system restore point before making any changes in directories that you can then go back to a previous state.

  Please reply back and let us know if these suggestions help you to solve your problem, then to benefit others.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Apple music stops after playing a song! I use windows 10 and the new itunes. He stops playing after one, sometimes two song... radio too... Please help. I installed and all new authorized...

  Apple music stops after playing a song!

  I use windows 10 and the latest itunes on my laptop. He stops playing after one, sometimes two songs... radio too... Please help.

  I installed and all new authorized...

  Thank you...

  Markus

  same thing here for all my Mac or PC windows... they are "working" 8 months later... unreal

• I have the all-new Apple TV 64 GB & I need a little assistance with it?

  OK, I have the all-new Apple TV 64 GB 1080i & how can you update App?

  As I have a game application that needs to be updated it is called asphalt 8 * is a car racing game *.

  & in the application it tells me that there is an update available, so how can I do to update?

  Read here: on the App Store on your Apple TV (4th generation) - Apple Support

• New Member - easy question

  Hello, new Member...

  Is the battery in the user Aspire ES1-511-C59V replaceable?  I'm looking for a portable base with this option - it looks that good number of the newer units no longer have this option...

  Thank you

  Thank you!

• After resetting the NVRAM C309a rejected all new cartridges

  How to fix c309a after resetting the NVRAM rejected all new cartridges, for an ox610000fb mistake made semi nvram reset done

  after reboot, asking all the cartridges to replace? help is appreciated.

  Unfortunately, I think that the printer is irredeemably right now especially if you did a reset full semi and still get an alphanumeric message. I have a document that I can link to for you on the error codes alphanumeric on this printer, which I will give you. But at this point, you must call to HP Total Care for assistance. Here is the link to this document.

• Not able to see the new Member shared alternative hierarchy on Smart view

  Hello

  I had to make changes on the replacement as a hierarchy below:

  1 created shared member on the new roll upward with Member Shared Property (replacing Hierarchy).

  2 removed the former member under the other roll upward.

  3 refreshed the Hyperion, planning of database.

  4 could see the new Member roll up on the alternative hierarchy after refresh.

  Now, when I try to extract data from the new hierarchy of alternative, I'm not able to get the data that I get the error message like "Invalid Grid - size XXXX member is located at the wrong location".

  I choose the option 'selection of members' members, but the grid is not valid when I try to extract data on smartview.

  Have I missed any step to make changes on the planning? I checked from myside to display the shared member on Essbase after updating of the planning application.

  Can you please help me in fixing the issue?

  Thank you.

  VERP.

  Thanks Dan.

  Tried to build the new sheet, and I was able to run successfully. Members have been placed wrongly and could fix it.

• code for all new creative cloud educard Bookstore says invalid

  Hello

  When I visit www.creativecloud.com/educard and follow the direction that the code for all new creative cloud educard Bookstore says invalid, screenshot below, is there a better way than this forum to find someone who can help?  can anyone send me please?  y at - it a live support person, I can call? :

  [personal information deleted... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [If you send messages by e-mail, please turn off your "sig file" function for display]

  [NEVER POST A SERIAL NUMBER OR AN OPEN FORUM BUY!]

  [You gave your number to all who read this message before]

  [I removed the number... or those who receive all their messages of forum by e-mail]

  Well, your redemption code is now useless after being posted in an open forum

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html