Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

Similar Questions

• I can't see the images received by using my Yahoo email in my MacBook Air, but I can see them in my iPhone 6, no idea why this is happening?

  I can't see the images received by using my Yahoo email in my MacBook Air, but I can see them in my iPhone 6, no idea why this is happening?

  Hello

  If you access your Yahoo mail via Mac Mail application, in the Mail menu bar, click Mail > Preferences , and then select the display tab to assure you that:

  Display remote messages HTML images is selected.

• I built a site using the free trial version. Why not open the site with the purchased application?

  This weekend I downloaded the free trial version of Muse on my laptop (PC), has done several tutorials and a LOT of work done on the site. When I tried to open the file this morning on my desktop (PC) - which integrates the latest version of Muse installed CC - I get the error message "this file Adobe Muse of the site requires a newer version of Adobe Muse. Please upgrade to the latest version. "What should I do now? I read everything I can find and I'm stumped. I really need to get this site opened today.

  Help! Thank you!

  Unfortunately no, we cannot save a file in a low version.

  Thank you

  Sanjit

• How to prevent the FF loading all Web sites using the HTTPS protocol

  FF is trying to load initially all Web sites using the HTTPS protocol, including of mozilla.org. Then I get the error of no reliable connection of course. Mozilla .org is the "invalid security certificate" and "the issuer of the certificate is unknown." I tried to delete the file cert8.db as suggested elsewhere but that did not help. If there is an option for this somewhere, I can't find it. I have the latest version of FF and Win7 running. Thanks for the help.

  There must be some sites that are still using a secure connection, as http://www.amazon.com/. If even a link to Amazon is redirected, you can check if you have an extension like HTTPS Everywhere.

  For Mozilla sites, Yes, you establish a secure connection.

  But you shouldn't get certificate errors! When you get this for virtually all secure sites, the problem is usually as follows:

  (1) error of date, time, or time zone who throw checks validity of the certificates of your system. Sometimes allowing to use a timesource on the internet, the computers can introduce this problem.

  (2) not be set up to work with your security software that intercepts and filter secure connections from Firefox. Products with this feature include Avast, BitDefender, ESET, Kaspersky; AVG has a shield search function which can cause this error on search sites.

  (3) malicious software on your system for the interception of secure connections.

  So... who is?

  If you have any of these specific security products, which would be the first thing to check. We might be able to help with specific next steps based on what you have if you tell us.

  Alternatively, you can examine the certificate to which Firefox is opposed to see if the issuer information pointing to the culprit. Take for example my test page:

  https://jeffersonscher.com/RES/jstest.php

  You should see a section "I understand the risks" in the page. If you expand this section, you will find a button Add Exception. You don't need to complete the process of adding an exception (I suggest not adding one until we know that it is not a problem of malware), but you can use the dialog box to display the information that makes Firefox suspicious.

  Click Add an Exception, and then view. If the view is not enabled, try first the button get certificate. Then in the certificate Viewer, refer to the section "issued by". What do you find here, or under the hierarchy of certificates? I have attached a screenshot for comparison of screen.

• Hello I can not connect using the camera Nikon D5 me please

  Hello I can not connect using the camera Nikon D5 me please :)))
  I've heard say that some work and I can not connect! Can someone help me to write on this topic?

  LR supports D5 attach now!

• I'm trying to publish my site using the Publish drop and the FTP host option.

  I'm trying to publish my site using the Publish drop and the FTP host option. I enter the details requested and all it gives me, it is an error message of "could not sign you [suite failed to read].» Check your user name and password'. I'm the host my site on One.com. There is no place for me to choose the 20 port (although it should use anyway) and I have spent hours on the design of Web sites and do not want to go to waste. I use a trial version but Adobe say he has all the features of the paid version, which, at this rate, I will not get! I've updated the app 12 days ago. Csomeone help?

  As the error says it's a problem with the user name and password. If your host requires that you use port 20 just add: 20 at the end of your address of the remote host.

  For example: yourRemoteHost.com:20

• Hello, is it possible to use the creative cloud on a chromebook? And how should I "install"? Thank you!

  Hello, is it possible to use the creative cloud on a chromebook? And how should I "install"? Thank you!

  No.... Mac or Windows only

  Well well, with the exception of a few mobile applications which I don't use

• I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect pag

  I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC

  By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.

  Thank you

  Sanjit

• That's why when I use the light flees to sequelae why it stops when I'm in the middle of a ram preview?

  That's why when I use the light flees to sequelae why it stops when I'm in the middle of a ram preview? also any idea on how to make both and and how to increase the ram?

  Please answer me when you can

  Tthanks

  FAQ: Why preview RAM only play in my composition?

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  Mylenium

• I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  I use Illustrator CS6 (Mac). I use the free transform tool. Why can I not use shift, Option, command to distort in perspective?

  Ah, hong.

  Then, drag Option and only use Cmd + shift.

• Im doing a sensitive web page and the height of my divs match, even if I did the math! No idea why?

  Im doing a sensitive web page and the height of my divs match, even if I did the math! No idea why? I have a rectangle of 100% with screen (1260px) with a square that represents 49% of the rectangle, with 2% margin on the right. Then the other half there is room who do the same size of the largest square with bottom margin and right, as appropriate. Yet looks like this in the browser! No idea why they do not align?

  Don't worry thereon, as soon as I posted I worked out how to do it!... Typical! I had somehow reduced the padding inside the small images! Thanks nevertheless!

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe

• Cannot connect Web site using the browser of Toshiba 32RL958

  Maybe this should not be «so smart TV...» »

  Trying to connect to any site that requires that a password fails. I know that I do not use the wrong password, but according to the website I am returned to the login screen or stay on as "guest".

  Any ideas please. I'm starting to get rather cut with what does not intelligent overall.

  Not clear why this is happening but maybe the browser can't save the cookie that is often necessary to connect to a Web site.
  Check in the settings, if something like this can change, but as much as I know the Internet browser via television does not provide the same options and performance as a common browser like internet explorer, chrome or firefox.
  You wait too long in most cases that you can use it only for common navigation and reading. For more activities smart tv, you need to use the apps.

• Multiple sites using the same instance of CF?

  Hi Gang-
  I have a client who has recently improved CF Pro to Enterprise and they use in a relatively simple way as an intranet. They would like to help me configure a second instance for the purpose of a staging server, but I noticed after they revealed they do not have the link of Enterprise Manager in their CF Admin screen.
  
  They need to reinstall CF using the MultiServer installation version to be able to deploy a second instance of CF? Need to uninstall and reinstall? Ugh...
  
  Can't they just create a second site under their web server, using a different port and you worry about the second instance of CF? Best practices for a moment, remember, they do not necessarily expand on this server, it is intended to be a staging server.
  
  Any ideas on the best and fastest way to handle this?
  
  Many thanks in advance,
  Rich

  Many questions, many answers. :-)

  Yes, rich, they would need to install the version multiserver for you to see this Enterprise Manager option in the CF Admin. But no, they would not need to uninstall the server deployment (what you did) to add to the MultiServer deployment. They can coexist (although it is not something most would do in general).

  The best news for you is that, Yes, they can indeed just set up a second site on their web server, and who also point to the deployment server CF one you have installed. It is, of course, assuming that they are running a web server that supports multiple sites. If it's Apache, you're good. If this is Windows, then as long as the Windows Server 2003 (or 2008 or Vista), you're good, too. (Just to be complete, for other readers, XP does not allow you run multiple sites at the same time.)

  If during the installation of the CF tells you that there all sites on the web server with CF, you need do nothing again create site. It should be immediately able to run pages CF. If you said that it is in CF link to a site, then you will need run the server web Configurator again. You can do it manually, even after installation. See the CF Admin and Config docs to learn more about it, as well as on this issue. (I know many like to just run things and hope that the interface is pretty clear, but as this issue shows, for some things anyone installing CF will be well served by looking at this collection of Miss often.)

  Hope that helps, Rich. It is not a RTFM response. :-) Suffice it to say that if you need more that what I said, it's in the manual. Yet, I am happy to answer follow up if I can.

• Traffic redirect Internet from the remote site on the main site using the tunel of vpn ipsec

  Hi all

  I have a problem to redirect internet traffic from my remote to the main site by the IPSEC VPN tunnel. The remote site is a Cisco 2801 router with ios (c2800nm-advipservicesk9 - mz.124 - 22.T) and the remote site has ios (C870-ADVSECURITYK9-M, Version 12.4 (15) T12, fc3 SOFTWARE VERSION). This redirect does not work and the last jump with extended traceroute form the remote site is the ip wan of the main site.

  Is there someone who can help me with the right settings this redirection via VPN?

  the remote site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 8

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpndgsn 10 ipsec-isakmp crypto map

  Description at HQ

  set of peer 41.223.X.X

  Set transform-set vpn

  match address VPNHQ

  !

  interface FastEthernet0

  IP 41.223.X.X 255.255.255.0

  NAT outside IP

  IP virtual-reassembly

  IP tcp adjust-mss 1300

  automatic duplex

  automatic speed

  vpndgsn card crypto

  !

  interface FastEthernet 4

  192.168.11.1 IP address 255.255.255.0

  IP nat inside

  no ip virtual-reassembly

  !

  IP route 0.0.0.0 0.0.0.0 41.223.X.X

  VPNHQ extended IP access list

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  the main site config file:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key dgsn2010 address 41.223.X.X

  !

  !

  Crypto ipsec transform-set esp-3des vpn

  !

  vpncreo 10 ipsec-isakmp crypto map

  Description FOR bastos

  set of peer 41.205.X.X

  Set transform-set vpn

  match address 110

  !

  interface FastEthernet0/0

  Description OF WAN

  IP 41.223.X.X 255.255.255.240

  NAT outside IP

  IP tcp adjust-mss 1492

  vpncreo card crypto

  !

  interface FastEthernet0/1

  Description OF LAN

  IP 192.168.10.1 255.255.255.0

  IP nat inside

  automatic duplex

  automatic speed

  !

  overload of IP nat inside source list NAT interface FastEthernet0/0

  IP route 0.0.0.0 0.0.0.0 41.223.31.241

  access-list 110 permit ip any 192.168.11.0 0.0.0.255

  NAT extended IP access list

  deny ip 192.168.10.0 0.0.0.255 192.168.11.0 0.0.0.255 any

  permit ip 192.168.10.0 0.0.0.255 any

  ip licensing 192.168.11.0 0.0.0.255 any

  !

  You must configure the routing policy based closure for NAT can be invoked on the main site.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

  Additionally, make sure that you don't do any NATing at your remote end, IE: you must configure the NAT exemption for all traffic from 192.168.11.0/24 to any (Internet).

  Hope that helps.