Hellor in multiple dredths Action error

Similar Questions

• Roll back the action errors

  I have had problems recently install a new software. I'd say about 60-75% of the programs I try to install to do the last step, usually save, then falls down, poster sometimes "roll back the action" and then erases everything what he changed and closes. Happens for different programs and I read it might be an older version or problems left by a previous installation failed, but it is none of these. Some are (more) new programs. I also read it could be a file of the registry that was somehow marked as 'read only' but I'm not sure that one or it's location. If anyone knows what's going on, please let me know.

  Thank you.

  Hi bevisjl,
   
  I you recommend to place the computer in a clean boot state and then try to install programs and check will they install, please provide us with error messages that you get when you install the programs with the specific name of the program you want to install:
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  c. under the general tab, click Selective startup, and then clear the check box load startup items.
  (The check box use the file Boot is not available.)
   
  d. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK and then click on restart.
   
  Once the computer restarts, verify if you are able to install programs.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  If you are able to install programs after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• still end action error.

  Hi all.

  I just put together a slideshow with his Prem Pro project. I dynamicaly connected again and have built my menus and buttons. I have a main menu with Play DVD button, and click on a chapter. 3 another menu hold 3 chapters each, next, previous and main menu button. Menu 4 holds the final chapter button a precedent and a main menu button.

  In the main Menu, choose chapter selection, I can select each chapter and all of the buttons in each menu do what they are supposed to. When I select a chapter he plays like I want it, then returns as it should to the menu page. The problem occurs when I select the READING of DVD button in the main menu. He plays initially, but only until the end of the intro (1 chapter) and then returned to the menu first chapter. He will not play the slide show in its entirety. the audit of the project, in the problem section it States 'law on the end... t run due to the end about the final chapter to action '. I had this set to, menu return to the main by default, the Overide button like, together and remote Menu as a return to the last menu. No mater what I tried to put in the end action area, Play DVD button will not play time line in its entirety. When I saw the final chapter, he plays as it should, then returns to the page main menu as the precepts of end action.

  All of the suggestions.

  a5teve.

  P.S. I'm on CS4 production premium.

  If you set an end on a chapter action, when you play the timeline, he gets this chapter and takes place as performed by action at the end of this chapter.  so that explains why your "reading dvd/play all" was not working.

  And if you have an end action of chaperones set on the last chapter on a timeline, you get a technical error, because it can make as a single action of end - end of chapter or the end of the calendar action action.  But ignoring that the error does not have a question.

  There are some playlists, and chapter playlists.  A chapter playlist could only 'play all' a chronology, so I don't understand how a chapter playlist solved your problem.

  Until I started working with still (then using the simpler programs where this has been managed under the hood), you both a play all and replaces chapters by adding.  Substitutions are now considered as more likely to cause problems.  But this means that the strategy for each chapter is a chapter "chapter playlist" (in your case 9 Chapter playlists) and a play all that plays the entire timeline (with no substitutions and no action at end of chapter).

  Or, the preferred method of Hunt, filming each chapter in public relations, each is timeline which can be a chapter, then a playlist manages the game all.

• Multiple connections WebDav - error 1055: cancel the event recording

  Hello

  I use WebDav to extract the files from the controller to the computer.

  It does not work when I use only one connection.

  When I use the same WebDav vi several times to extract the files in different folders, I get error 1055: unregister events.

  

  The first vi continues to operate, but the other stops.

  The vi is attached in the following snippet:

  In order to run it, the joint screws are also necessary ('FileInfo name and Path.vi' and "State.ctl of WebDAV sync").

  

  The second vi I want to run at the same time is exactly the same, but with different name of queue and different data records:

  

  If I delete the function "Cancel registration for events" on the side right, then I get no error, but the second vi stops without explicitly stop the while loop.

  What could be wrong?

  Thank you.

  The problem seems to be related to the use of an event inside a timed loop structure.

  Call loops are designed to be run in certain time intervals, while program alsways waits on the structure of the event inside the loop until an event occurs. These two behaviors are strictly opposed to each other, which could cause problems in this particular case.

  Replace call loops with while loops, seems to solve the problem

  Andreas Jost

  Technical sales engineer

  National Instruments

• Multiple windows Vista errors

  Recently, I tried to watch videos on youtube, and when the video read ok - there is no sound... So I decided to try other things, such as playing games online on facebook, still no sound. Thinking that it is just a problem with IE, I go to use google chrome instead - same story. However when I try these things on Firefox, it is solid! I don't know how to solve the problem with 2 other browsers, so I try a restore of the system, this is and when the computer has done this, it is said that there is "an unspecified error" which caused the restoration does not work - and nothing to change.

  If someone can help with this, fortunately, I'm going to try your suggestions, but I have already tried a few common 'solutions' I found while looking around of - however none of these things.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• "The system administrator has prohibited this action" error message

  Why do I get a message saying "the system administrator has blocked this measure. Contact your system administrator or log off and log on as a system administrator. » ? I am the system administrator, and I AM logged on as system administrator! Access control state that I have complete control of the system, but I get this message!

  This is a brand new computer, simply put on yesterday (Sunday, September 18, 2011) with Windows7 Home Premium installed. I tried to load a print shop software, and it has not installed correctly. When I tried to correct the problem and when I tried just uninstall the program and restart, the above message is what I get! So now I can use the program or uninstall it! Given that we want to bash my new computer with a baseball bat! :)

  Help, please! Also, I am to a point - less computer tech jargon best! Thank you!!!

  Hello

  1. are you able to install other programs?

  2. What is the error message or an exact error code?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to run the program as administrator and check if it helps.

  Follow the steps to run the program as Administrator:

  a. right-click right the program and click Run as administrator.

  b. then try to uninstall the program.

  Method 2:

  Give all the permissions on your user account and check if it helps.

  Follow the steps to give all permissions:

  a. click Start, type regedit.exe in the search box and press enter.

  b. right-click on HKEY_LOCAL_MACHINE , and then click permissions.

  c. click Add under the Security tab and add a new group: everyone.

  d. Select everyone and check the option: total control.

  e. restart the computer and check if the problem is solved or not.

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 3:

  Try to create a new user account and check if it helps.

  Create a new user account: http://windows.microsoft.com/en-US/windows7/Create-a-user-account

  If the new user account works, see steps on how to copy files to the new user profile in Microsoft article provided: http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile

  Hope the information is useful.

• That I found a bug in the API? : Adding multiple disks SOAP error

  I am able to add the drives linearly as below:

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [0]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [1]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > [$devSpecs [2]]);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  However, when I try to add all disks at the same time I get a SOAP fault

  My $vmSpec = VirtualMachineConfigSpec-> new (deviceChange = > \@devSpecs);

  $vmView-> ReconfigVM (spec = > $vmSpec);

  The error:

  SOAP fault:

  -----------

  Error string: cannot complete the operation because the file or the /vmfs/volumes/ba5e81fe-201a6c4e/paul-vm1/paul-vm1_0_3.vmdk file already exists

  Lack of details: FileAlreadyExistsPAULWORK > clear

  Is there anyone out there who knows what's going on?

  I did a dump as you said, and it was very helpful.  I needed to add the code below to make it work

  It turns out that I need a unique key for each disk that I add.  Thank you for your help

  my $disk = VirtualDisk-> new)

  controllerKey-online $devSpec-> device-> controllerKey,

  unitNumber-online $devSpec-> device-> unitNumber,

  key            => -1 *($i + 1),

  support-online $devSpec-> device-> storage

  capacityInKB-online $devSpec-> device-> capacityInKB,

  );

  $devSpec = VirtualDeviceConfigSpec-> () new

  operation-online $devSpec-> operation,

  fileOperation-online $devSpec-> fileOperation,

  device-online $disk,

  );

  Is there a better way to do that

• Error PARM (shows like mrap) with multiple selections, no errors with single selection

  Hi all

  I'm new to Illustrator scripting this is my first script. I get this error "error 1200: Illustrator error: 1346458189 ("MRAP"): line 50" which is the line:

  var next_board = doc.artboards.add([next_board_L, next_board_T, next_board_R, next_board_B]);  

  It only occurs when I have several selections and never when I have only a single selection. After a little research I found the error is actually PARM, but I don't see the variables not instantiated or other issues that might be throwing this error. I'm on a mac Illustrator CC. I would appreciate any help on this matter. Here's the complete script.

  #target Illustrator
  
  
  // This script was made to take all selected objects
  // Create a new arboard for all Selected objects 
  // At a user specified width and height then
  // Scale the object to the artboard size and center
  
  
  
  
  var doc = app.activeDocument;
  var select = doc.selection;
  
  
  
  
  if (select.length > 0) {
  
  
       var title = "Fit Selected Object(s) to Artboard(s)";
       var msg = "Enter the width and height of artboards (single number)";
  
  
       var board = Number(Window.prompt (msg, 0, title));
       
  
  
       for(var i = 0; i < select.length; i++) {
  
  
            var selectW = select[i].width;
            var selectH = select[i].height;
  
  
            if(selectH >= selectW) {
                 if(board > selectH) {
                      scale = board/selectH*100;
                 }
            } else {
                 scale = board/selectW*100;
            }
  
  
  
  
            var boardIdx = doc.artboards.getActiveArtboardIndex();
            var boardSrc = doc.artboards[boardIdx];
  
  
            var boardSrc_L = boardSrc.artboardRect[0];
            var boardSrc_T = boardSrc.artboardRect[1];
            var boardSrc_R = board;
            var boardSrc_B = -board;
  
  
            var moveX = 10;
  
  
            var next_board_L = boardSrc_R + moveX;  
            var next_board_T = boardSrc_T;  
            var next_board_R = next_board_L + (boardSrc_R - boardSrc_L);  
            var next_board_B = boardSrc_B; 
  
  
            var next_board = doc.artboards.add([next_board_L, next_board_T, next_board_R, next_board_B]);  
  
  
            select[i].resize(
                scale, //this is a percentage of current width  
                scale, //this is a percentage of current height  
                true, // changePositions  
                true, // changeFillPatterns  
                true, // changeFillGradients  
                true, // changeStrokePattern  
           );
  
  
  
  
            var selPosX = select[i].left;
            var selPosY = select[i].top;
            
            var selBoardDiffX = next_board_L - selPosX;
            var selBoardDiffY = next_board_T - selPosY;
            var toCenter = 0;
  
  
           select[i].translate (
                     selBoardDiffX,
                     selBoardDiffY,
                     true,
                     true,
                     true,
                     true
           );
  
  
           var boardH = next_board.artboardRect[2] - next_board.artboardRect[0];
            var boardW = next_board.artboardRect[3] - next_board.artboardRect[1];
  
  
           if( boardH > select[i].height ) {
                toCenter = (boardH-select[i].height)/2;
  
  
                    select[i].translate (
                              0,
                              -toCenter,
                              true,
                              true,
                              true,
                              true
                    );
  
  
           }
           var NegSelectW = select[i].width * -1; //Must be a negative number
  
  
           if ( boardW < NegSelectW ) {
                toCenter = (boardW+select[i].width)/2;
  
  
                    select[i].translate (
                              -toCenter,
                              0,
                              true,
                              true,
                              true,
                              true
                    );
  
  
           }
       
       }
  
  
  }
  

  Ooh! Go straight to here:

  Re: [Illustrator CS5.1] how to create a custom artboards.add function argument

  This is exactly the kind of thing you need!

• keyboard - can't get multiple characters/actions by holding a key

  I can't go out any key, say an arrow key to move continuously by holding down

  Hello

  You can try the steps listed in the link: Troubleshoot wired keyboards that do not or only the category of evil characters: http://support.microsoft.com/kb/258826

• Multiplication of ColdFusion error

  I use the Version of the server: 6,1,0,63958 and. 58 * 100's assessment at 57.
  
  Y at - it a patch for this problem and is there any other known equations that evaluate evil? I might have to correct a large number of historical statistics.

  As I already said that there is nothing wrong with the CF or Java. This is perfectly normal. Your solution is (assuming that you are working with percentages):

  
  
  
  
  
  

  Or all together:

• Masking multiple elements with dynamic action me gives error

  Hello
  
  I have a selection list, and I tried to create a dynamic action on this subject. When the list is zero I want to hide items. The problem is that I thing 200 articles on my page and when I try to list them all under the dynamic action, it gives me an error or cut off my list. I tried created two separate actions of dynamics, but it did not work. Any suggestions? Any help would be so appreciated. Thank you!

  The problem is that I thing 200 articles on my page and when I try to list them all under the dynamic action, it gives me an error or cut off my list.

  Is it that you were able to cross the mark of products/page 100? But the official documentation has to say otherwise:
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/limits002.htm#BGGIECDF

  It is possible to define and to return more than 100 items on a page, but you will get a 404 error when running if you submit a page with over 100 articles (including the hidden objects and elements of page zero). You will not be able to present and process a page that has made more than 200 points. You will be able to set more than 200 items in your page and send, and then process the page If the actual number of elements returned is limited to 100 or less by using permissions and conditions.

  * Specify error messages you received

  Error message: error failed to create dynamic action.
  ORA-20001: error creating dynamic action sub-action name = "NATIVE_HIDE" id = "" ORA-01461: can bind to a LONG value only for insert into a LONG column > "

  You seem to have exceeded a 4000 or 32 K bytes on a column of metadata for dynamic action when you set the dynamic action. Because you cannot use all 200 points at the same time, you must create multiple dynamic actions that correspond to some subsets of items are actually rendered.

• Problem of errors multiple blue screen

  Hello I seem to have a problem with my desktop Compaq Presario SR5275AP, OS: Windows Vista Home Basic Edition, 1 GB RAM, 80 GB HARD drive.

  Already when I turned on the pc, it has successfully started. But after a while, blue error screen open & then tried to restart but not to start successfully. i.e. kept getting blue screen errors & also the error codes not change now... More important still, I already brought my PC to the computer shop to fix it, which also means to reformat the PC (for example delete all personal files & programs installed after 1 day of use) already and for the 1st year after resolving, it was OK. But after that, the same problem came back again... so I don't really know if my PC was the hardware problem or not... because I think that if it's a software problem, it should have been already fix after reformatting my PC hard drive.

  I did things once the problem occurred:
  I also tried to search my computer viruses or other malware using my anti-virus software updated software but got nothing. (no malicious software found) I also tried to search my computer the memory problem (RAM) but received an error message saying that my RAM had problem.

  I even tried to solve this problem, but my recovery partition was already erased... so I think that maybe I need a Windows CD in order to solve this problem no doubt... but if this was caused by a defective hardware, then perhaps that the cant of the problem would be resolved even if I use this CD to reinstall a clean version of Windows. So I'm not very sure if all these blue screen errors have been caused by a defective hardware such as graphics card or something else?

  I hope that you will respond to these as soon as POSSIBLE. Thanks :)

  OK, I posted the steps in the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/multiple-blue-screen-errors-continued-from-the/132543ca-FD8A-4130-8f64-00d9e63f31c5#last

• error 'error in the attempt to run the SQLplus action'

  Hello world
  
  SOA, metadata schemas has been created successfully
  but
  When creating schema of the IOM by rcu, 'error when trying to run the SQLplus action' error occurred.
  OS: linux 64-bit
  UCR: 11.1.1.6
  
  Thanks for your help.

  Yes. RCU11.1.1.6 is compatible with 64-bit linux. I wanted to say is your RCU 32-bit or 64-bit Installer? For 64-bit linux, use 64 bit RCU.

  Kind regards
  GP

• Action script error on some Web sites #2044

  A few days ago, I downloaded a debugged for a Mac flash drive. It was supposed to patch a flaw securoty. I use an OSX6.8 Max, the version of Safari 5.1.5 and the Flash Player is version 11.2.202.233.

  The error box keeps coming on my local newspaper online. It is said:

  An Action error:

  Error #2044 unhandled AsyncErrorEvent: text = Error # 2095 flash.net. NetStream ws cannot call the recall on XMPdata. error = market back. Error #1069: Property noot found on the bridge. as a customer of $0.Customer and there is no default value.

  [to flyover\flyover flyover / connectStream () [C:\Users\dwallace\Documents\HTML5] as 169]

  to flyover / netStatusHandler () [c:\users\dwallace\Documents\HTML5Launchers\flyover\flyover.as: 141]

  at flash.net:NetConnection/connect()

  Overview (c:\Users\dwallace\Documents\HTML5Launchers\flyover\flyover.as:129)

  The debugged version was completely download to my computer?

  I do an uninstall and reinstall?

  I'm not dwallace

  OK - no error message more. Thanks Pat

• Pivot in 11g producing a keyword error

  Hello everyone. :) I am a freshman in SQL and just to get to the track of a blazing function pivot for the section of society, I work in. (it goes without saying, a response of Sesame Street style is not offensive.) We are literally moving to 11 g (11.2.0.1.0). Unfortunately, none of our more experienced programmers now anything on the pivot function. It's not really surprising to me since we worked in 10g. In any case, I use the SQL Developer 3.0.04 version which I know is not the newest, but I do not yet have permission to upgrade. I used http://www.oracle-developer.net/display.php?id=506# to me as much as I am about this feature. Please , could someone help me see what Miss me?
  
  The script that I have problems with is:
  
  SELECT *.
  Of
  (SELECT
  begin_month,
  begin_yr,
  uut_part_num,
  uut_part_description
  Of
  Cris.serial_num_rpt_view
  PIVOT (SUM (wonum) AS WO_Count
  FOR begin_yr AS year, begin_month IN
  (AS of January 01,
  02. IN February,.
  03 MARCH
  04 IN April,
  05 MAY,
  06 in June,
  07. IN July,.
  August 08,
  September 09,
  10 IN October,
  In November, 11
  (12 DECEMBER))
  WHERE
  date_reported > = to_timestamp (: v_bDate, ' MM/DD/YYYY')
  AND date_reported < = to_timestamp (: v_eDate, ' MM/DD/YYYY')
  AND Association = 'HORN')
  The site WHERE AS SUPERIOR (BOX WHEN: v_SITE IS NULL THEN '%' ELSE: v_SITE END)
  AND TFA as SUPERIOR (BOX WHEN: v_TFA IS NULL THEN '%' ELSE: v_TFA END)
  AND SUBTFA as SUPERIOR (BOX WHEN: v_SUBTFA IS NULL THEN '%' ELSE: v_SUBTFA END)
  AND UUT_Part_Number as SUPERIOR (BOX WHEN: v_Part_Number IS NULL THEN '%' ELSE: v_Part_Number END)
  AND UUT_Serial_No as SUPERIOR (BOX WHEN: v_Serial_No IS NULL THEN '%' ELSE: v_Serial_No END)
  -The next line is for counting WO, given that the WOs repeat the case when count only the last instance of a series of repetitions WO numbers
  (CASE WHEN lead (WOs.WONUM, 1, 0) (WOs.wonum order) = WOs.WONUM THEN 0 1 OTHER END);
  
  The error I get is:
  
  ORA-01738: lack of KEYWORD
  01738 00000 - "missing IN the keyword"
  * Cause:
  * Action:
  Error on line: 16: 2 column
  
  An indication of error bounces between lines 15 and 16. If I put IN at the end of the 15 I so a missing closing parenthesis error...
  
  Thank you in advance.

  Pivot operator converts an aggregate table row in a column. The values of distinct line become columns in the output and aggregate column value is placed under the appropriate column Swivel.

  The syntax of the Pivot operator is as below:

  -- SELECT ..
       FROM table PIVOT (aggregateFunction [, aggregateFunction] FOR column IN (expression [, expression]))
  --  WHERE ..
  

  Limitation of the PIVOT operator is, it supports only pivoting on a single column.

  You cannot use this:

  FOR begin_yr year, AS begin_month IN

  See the tutorial several PIVOT columns:
  http://mangalpardeshi.blogspot.cz/2009/06/Pivot-multiple-columns.html

  and the PIVOT tutorial:
  http://www.Oracle-base.com/articles/11g/pivot-and-UNPIVOT-operators-11gr1.php