Multiple connections WebDav - error 1055: cancel the event recording

Similar Questions

• Detection of change DAQmx - cancel the event error logging

  I am trying to use DAQmx for detection on some digital lines of changes. I think I installed everything in this article, but I always get error 'Error 1 has occurred to unregister events in the detection of change in Test - Error.vi Unregister'. When I change the structure to register for another event, not involving DAQmx but using the same structure, I get this error.

  I need this implementation on a code that runs for a very long time and according to the above article:

  "Use the Unregister function for events and function to destroy the user events to release the associated events and the reference of user event. LabVIEW unregisters all events and destroyed the existing user automatically events when the top-level VI end of execution. However, to conserve memory resources, National Instruments recommends that you unsubscribe and destroy the user events explicitly, especially in an application that is running for a long period of time. »

  Here are some screenshots of my comic, but also the .vi. Note that the detection of real change does not work well, it's just after I click on 'stop' I get the error generated by the "unregister to events.vi.

  

  

  Note When you transfer the .vi, I saw the issues described on this thread and had to change the name of the file...

  crossrulz wrote:

  You must cancel the registration of the event before deleting the task DAQmx.

  Delete the task implicitly cancels registration of events.  If you disable the task, rather than simply cancel, the event is already cancelled and you don't need two nodes.

  Or quite simply, the event is part of the job.  no tasks, no event and LabVIEW cleans the records for the non-existent event.  Other events that are not 'owned' by similar of e/s Sessions must use the unregister (as of the events of user)

• I get an error by cancelling the registration of the OCX C:\ProgramFiles\LizardTech\LizardTechDjVu Controll\DjVuCntl.dll

  I get an error by cancelling the registration of the OCX C:\ProgramFiles\LizardTech\LizardTechDjVu Controll\DjVuCntl.dll

  More comments from Gokul, I suggest that you contact the Lizard Tech support listed below:
  http://www.LIZARDTECH.com/support/

  You can also post your question in the community forums of Lizard Tech.
  http://www.LIZARDTECH.com/forums/

  I hope this helps.

  Marilyn

• Error 1055 to the property node: object reference is not valid. This error only occurs in a built application

  I use a WaveformChart to display multiple traces of data, the number of traces is variable, I use nodes property to set the number of traces that the digital display is visible or not, as there are more data increases the number of tracks and digital displays are made visible. In the design of Labview environment, everything works fine. However, when you run the application built so two or more traces must be mapped I see error 1055. I suspect that it is related to the visibility of the digital display on two or more traces of waveform. See attached VI.

  Why this error occurs?

  Thank you.

  Only trace

  

  Two traces

  

  Graphic WF only create their plots at development time.

  If you try to access a field that has never been there you get this error.

  To work around this detail, just the size the legend of the locations more than ever expected to use at the time of development, so that the parcels are created and available when you perform the compilation.

  Ben

• Install Error 1935 in the event log when trying to manually install the KB954430

  Vista Home Premium 32 German

  Automatic update of Vista tried every day to install the fix KB954430 (MSXML Core Services 4.0 Service Pack 2).
  
  To resolve this problem, I tried one of the suggestion of many to install this fix manually.

  So I downloaded msxml4-KB954430 - deu.exe Microsoft.com and all first I removed the patch, then I did a reboot and then I started the installation as an administrator.

  During the installation, I got the error in a message box:
  "During the Assemblierungskomponente {DA656E4D-45B9-3659-A06B-D6B9ABF34537} ein Fehler aufgetreten ist der installation. HRESULT: 0 X 80073715. »
  = during the installation of the component assembly... an error occurred...

  After a click on the ok button, the installation was cancelled.

  The event log entry:
  Product: MSXML 4.0 SP2 (KB954430) - Fehler 1935. During the Installation der Assemblierungskomponente {DA656E4D-45B9-3659-A06B-D6B9ABF34537} ist ein Fehler aufgetreten. HRESULT: 0 X 80073715. Assemblierungsschnittstelle: Returned IAssemblyCacheItem, function: commit, Assemblierungsname: Microsoft.MSXML2R, type = "win32", version = "4.1.1.0", publicKeyToken = "6bd6b9abf345378f" processorArchitecture = "x 86"

  I already know:
  http://support.Microsoft.com/kb/941729
  http://support.Microsoft.com/kb/936181

  What can I do, to make this boring, works of hotfix update works not properly?

  Thank you
  Wolfgang

  Hi Wolfgang,.
  If it's for a computer language Duitsch, I recommend that you visit a site from Microsoft speaking German to get the best possible help to your question.
  Please follow the link below.

  http://support.Microsoft.com/common/international.aspx

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix a client SSL key private credential error code in the event viewer

  Hi people,

  I hope someone can help. I am currently using Windows 7 Professional 64 bit, updated with the latest updates from Microsoft.

  I get the following error message, ()every 5 minutes exactly) in the Event Viewer administrative, computer management.

  "A fatal error has occurred when trying to access the private key SSL client credential." The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003 "

  It began on October 14, 2014. There are now more than 40,000 of the codes of this edition.

  A sample of the log data is as follows;

  Log name: System
  Source: Schannel
  Date: 18/10/2014-20:54:40
  Event ID: 36870
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: AP1
  Description:
  A fatal error occurred when attempting to access the private key SSL client credential. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003.
  The event XML:
  
   
     
      36870
      0
      2
      0
      0
      0 x 8000000000000000
     
      133003
     
     
      System
      AP1
     
   
   
      customer
      0x8009030d
      10003
   
  

  I looked at all the suggestions online and have found nothing of what is specific to this problem for windows 7 and how to solve it. I would be grateful if someone could guide me in the way to solve the problem.

  Thanks in advance.

  Tom

  Dear Isha,

  Thanks for your follow-up. After spending considerable time on the issue, I stopped just by using the function of collective housing, which heals many error codes. It is redundant to a standard network configuration and is not worthwhile. Since Windows 10 deletes the function of group living, I'm not sure that I need to spend time on this...

  I have also had also removed the bad machine key and senior partners of information in the directory of network of peers, which seems to have solved the problem.

  Thanks for your thoughts.

  Tom

• SecEvent newspaper missing file - access denied error (5) through the event viewer

  After you save and clear logs (more precisely the security log file), I stop the PC.  It is started the next time, I went to read the log through the event viewer, I encountered this error: could not open the event to the event log viewer or custom views.  Verify that the event log service is running or query is too long.  Access is denied (5). (((("I checked that has) I use the admin account b) other log files are fine) 3 the secevent.evt file is not present in the C:\Windows\System32\winevt\Logs folder 4) on the creation of this file (as a copy/past from the application log file and rename it to secevent) the file is not written in.  (5) event log service can be restarted without error. (6) can not clear the security log file, I created.  Error reads as follows: Event Viewer is unable to clear the log.  The following error occurred: access is denied

  Any help is appreciated.

  I ended up having torebuild machine from scratch.  Nothing else has worked. Good luck

• Errors & warnings in the event viewer on windows 7 Desktop compputer

  I was contacted by someone with a foreign accent (of Bangladesh) telling me that he represents Microsoft and wants only $125. get rid of errors and warnings in Event Viewer.  When I said no... they went down to $49. Can I solve this problem?

  It's a scam.  Ignore it.

• structure of the event recorded does not change value

  I have a VI that communicates with an FPGA via a telnet interface.  I have several Boolean controls on the front panel.  When you click a control, it sends a write command on the face i in telnet to the FPGA.  Similarly, if a process in the FPGA himself wrote the same registry (that control written when I clicked on it), an order is generated in the FPGA and returned to the VI and the control (via a local variable) lights or unlights accordingly (based on value).  In other words, these controls are read-write...

  It's all workers, except for one important thing.  I have the code that runs through a structure of event whenever the value of the control changes.  I can see that this code executes in fact when I click on the control via the front panel.  HOWEVER - when something is generated in the FPGA finally changes the value of the control, the structure of the event does not, even if I see the value of the change of control on my front.

  A specific example, I have a control named CLIENT_LB.  When I click on CLIENT_LB, I see it lights up, and I see the event structure code run.  Now, if I have the FPGA process to set CLIENT_LB to 0, I see unlight on my front, but does not run the code structure of the event.  I have probes in place who have checked the associated local variable CLIENT_LB evolving impact of values.  The structure of the event reads: 'CLIENT_LB': value change.

  Shouldn't an event structure "value change" run when the value changes, regardless of whether if it happened manually (i.e. me by clicking on the control) or automatically (i.e. the FPGA written in VI and changes the value of the control)?

  The VI is great, and you would not be able to test it in any case unrelated to the material, to remedy that I've attached 2 screenshots, I have described below.

  1. This is where the string from the FPGA analysis occurs.  The chain between the sub - VI, and then the data chain part is hidden to determine if the Boolean value of the control is true or false.  I put a probe on CLIENT_LB, and I see that as the FPGA changes the value of the register, CLIENT_LB passes from false to true as a result.  I checked this several times.

  2. it is the structure of the event.  This code runs when I click on CLIENT_LB on my face, but does not run when the peak CLIENT_LB #1 local variable is changed.

  Writing to variables never fires events to "change the value. If writing should raise this event, use the property "Value (follow the signs).

  Norbert

• Who should I send my error reports in the event viewer?

  Answers from Microsoft sent me an email suggesting that I have send reports of error for them.  Who are they? & How to get an address to send them to?  By clicking on reply to the email disobeys.  Any idea who wants this info?

  Well, there are a few things you can do.

  the first thing I would do is to simply unplug the printer from the computer, reboot.   and keep the printer disconnected during your analysis and resolution.

  Go back, see if there is software for the Lexmark homesite (for your printer model) who may have revisions or corrections of errors like yours.

  more often than otherwise, manufacturers release updates of their software and drivers, after having the cd that are included in the boxes of the printer.  They also provide FAQs on issues they have discovered and their recommendations on how to solve the problems.

  then see Lexmark and let us know.

  either by the way, this can be a good reference to search for the codes of error on their Web site:

  lxdnCATSCustConnectService

• Error when inserting the event calendar (on Simulator)

  Hello

  I tried to run the example of pimcalendar (from GitHub WebWorks examples) on Alpha of Dev Simulator, but I got the following error:

  Need error cannot find usr/lib/webplatform/plugins/next/libpimcalendar.so library is not found

  I have the last Simulator and installed latest SDK WebWorks

  Is this a known issue with the Simulator? Or is the example, which does not work properly?

  I faced the same problem.

  All packaging the application through corrugation Simulator, make sure that in the BUILD-> TARGET SETTINGS is set to the SIMULATOR.

  Worked for me.

  

• Cancelled the event free but was still charged $164,85

  I recently signed up for a free trial of Adobe Stock who announced that you can upload 10 images free stock with the free trial version. I downloaded the images and decided it wasn't a good investment for me to pay after the trial. I cancelled one week before the date of the end of the trial, but now I see a charge for $186,85 in my account. How can I reconcile this?

  The money was repaid on July 12, 2016.

  Concerning

  Stéphane

• The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

  I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

  original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

  Hello Steven,

  Did you ever receive notifications that a virus or malware has been removed from your system recently?
  My only thought is that it is the remains of an infection on your machine.
  It is most likely harmless, but I don't understand why you'd be concerned.
  Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
  http://support.Microsoft.com/kb/308569
  I would check to see if there are tasks to run at startup:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tsconcepts03.mspx?mfr=true

• Errors and warnings in Event Viewer in the field of applications on a laptop running Windows 7.

  I receive a number of warning and an error message in the event viewer in the field of applications on a laptop running Windows 7.  Is there a way to fix this or fix another way?

  Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes four major newspapers in Windows. These are application, security and system with Applications and Service logs as a source more details... For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  8. for Vista and Windows 7 Google is the best source of information. Search for selected text in the Description part of the report (not of the particular words of phrases) that "this exact word or phrase" Gets the best results. Focus on Social Technet and Microsoft Answers reports in the last 12 months. Look elsewhere if a response is difficult to find.

• I need the event. PreventDefault() when event.cancelable = false

  Small question

  I need to cancel the event of 'TitleWindow.titleBar.MOUSE_DOWN' using events. PreventDefault() because I implemented my own custom player. A trace (event) shows that it is not voidable. TitleWindow.isPopup has the value false alreay but to TitleBar listen to event MOUSE_DOWN. Is it possible/derivation to cancel this event? Ideas?

  Long explanation

  I extend a TitleWindow to make it resizable. Move the window works fine in Chrome/Firefox, but not in Internet Explorer. When you use IE the window always slipped when the mouse cursor moves off the stage (flash).

  Then I started to play with the scene. MOUSE_SOWN event and I found that when you press the mouse on the Flex TitleWindow is able to follow the mouse position changes usign Stadium. MOUSE_MOVE even if the mouse leaves the scene. But when you press the button of the mouse on the title bar MOUSE_MOVE stops when the mouse leaves the scene of the shooting.

  So my idea was, event MOUSE_DOWN cancel / preventDefault () on the title bar and use my own stadium. MOUSE_DOWN to start dragging the window.

  Thanks for reading. Ideas?

  Event.stopImmediatePropagation