Help at the waterfall "select choice".

Hello
I tried to create a JSF page with 2 commands 'Select one choice' A and B. The contents of the control B depend on the selection made on the control. So far what I have is control B displays the contents of the related data of the first element on the control, but if I change the selection on the control B does not change its content.

What are the steps to create a pair controls 'Select' cascading in a JSF page?

Command has must indicate the attribute X table X.2
Control B to display the attribute table Y.2 Y
Attribute X 1 is a primary key
Y.3 attribute is a foreign key (of the X.1 attribute)
Y.1 attribute is a primary key

Can I use read only views?

Thank you.

Hello

the steps are

-define autosubmit = true on selectOneChoice 1
-Have a ValueChangeListener who gets the selected value and who uses it to set the query for the dependent list condition
-use AdfFaces.getCurrentInstance () .addPartialTarget () to update the first list

For 10.1.3 I docmented in the document, you can download it here: http://thepeninsulasedge.com/frank_nimphius/wp-content/uploads/2008/05/OldAndLostBlogBusterTips.zip

See pages 323 and 332

Frank

Tags: Java

Similar Questions

Is it possible to delete a plot with the help of the mouse select the chart control?

For example, when I use the plot to draw thousands of lines on the chart control, I want to delete some of them, but there are thousands of generated plotHandle.

How can I get the plotHandle of the specific line on the chart control with the help of the mouse to select the option?

If I save the information from the lines, such as the plotHandle and the coordinates on a table or list, etc, I compare information lines for the plotHandle of the specific line.
Is it all a user-friendly way to remove a track selection on the chart control?

I can't give you a reasonable way to solve this problem, since as you have already noted plot do not snappable plots.

A possible warkaround would be to replace the plot of individual instructions with a PlotXY matching with 2 bays 2 points each, which correspond to the x 1, x 2, y1, y2 parameters to plot. PlotXY plots are snappable, so you can enable this procedure select the plot and remove it.

Help of the complex select query (Group by)

Hello
I am in need of your help to create a unique select query for the data in the table below and whose output requies. I use oracle 10g on RHEL 5 version.

create table bustour (number of bussno (4), start_date date, number (2)) passenger;
ALTER session set nls_date_format = "dd-mm-yyyy";
insert into bustour values (4123, April 10, 2009 ", 20);
insert into bustour values (4123, may 10, 2009 ", 25);
insert into bustour values (4123, may 10, 2009 ', 18);
insert into bustour values (4123, June 10, 2009 ', 15);

insert into bustour values (6138, March 10, 2009 ', 16);
insert into bustour values (' 6138, March 10, 2009 ", 19);
insert into bustour values (6138, April 10, 2009 ', 22);
insert into bustour values (' 6138, April 10, 2009 ", 13);

insert into bustour values ("4123, July 10, 2009 ', 23);
insert into bustour values (4123, August 10, 2009 ", 27);
insert into bustour values (4123, November 10, 2009 ', 15);

insert into bustour values (6138, may 10, 2009 ', 16);
insert into bustour values (6138, may 10, 2009 ', 13);
insert into bustour values (6138, may 10, 2009 ', 18);
insert into bustour values (' 6138, may 10, 2009 ", 24);
insert into bustour values (6138, July 10, 2009 ", 20);
insert into bustour values (6138, August 10, 2009 ", 18);

SQL> select * from bustour;

    BUSSNO START_DATE PASSENGERS
---------- ---------- ----------
      4123 04-10-2009         20
      4123 05-10-2009         25
      4123 05-10-2009         18
      4123 06-10-2009         15
      6138 03-10-2009         16
      6138 03-10-2009         19
      6138 04-10-2009         22
      6138 04-10-2009         13
      4123 07-10-2009         23
      4123 08-10-2009         27
      4123 11-10-2009         15

    BUSSNO START_DATE PASSENGERS
---------- ---------- ----------
      6138 05-10-2009         16
      6138 05-10-2009         13
      6138 05-10-2009         18
      6138 05-10-2009         24
      6138 07-10-2009         20
      6138 08-10-2009         18

17 rows selected.

I want query output as below :

Bussno  start_date      end_Date   totalpassengers   maxpessenger  maxpassdate
4123    04-10-09        06-10-09          78              25         05-10-09
6138    03-10-09        04-10-09          70              22         04-10-09 
4123    07-10-09        11-10-09          65              27         08-10-09
6138    05-10-09        08-10-09         109              24         05-10-09

So that we can know on what particular travel calendar, we have obtained maximum passengers and the date. (For calculating % of bonus driver)

Please help me to write the query.

Best regards
Nisha

OK, something like this:

with my_tab as (select 1 id, 4123 busno, to_date('04/10/2009', 'dd/mm/yyyy') start_date, 20 passengers from dual union all
                select 2 id, 4123 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 25 passengers from dual union all
                select 3 id, 4123 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 18 passengers from dual union all
                select 4 id, 4123 busno, to_date('06/10/2009', 'dd/mm/yyyy') start_date, 15 passengers from dual union all
                select 5 id, 6138 busno, to_date('03/10/2009', 'dd/mm/yyyy') start_date, 16 passengers from dual union all
                select 6 id, 6138 busno, to_date('03/10/2009', 'dd/mm/yyyy') start_date, 19 passengers from dual union all
                select 7 id, 6138 busno, to_date('04/10/2009', 'dd/mm/yyyy') start_date, 22 passengers from dual union all
                select 8 id, 6138 busno, to_date('04/10/2009', 'dd/mm/yyyy') start_date, 13 passengers from dual union all
                select 9 id, 4123 busno, to_date('07/10/2009', 'dd/mm/yyyy') start_date, 23 passengers from dual union all
                select 10 id, 4123 busno, to_date('08/10/2009', 'dd/mm/yyyy') start_date, 27 passengers from dual union all
                select 11 id, 4123 busno, to_date('11/10/2009', 'dd/mm/yyyy') start_date, 15 passengers from dual union all
                select 12 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 16 passengers from dual union all
                select 13 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 13 passengers from dual union all
                select 14 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 18 passengers from dual union all
                select 15 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 24 passengers from dual union all
                select 16 id, 6138 busno, to_date('07/10/2009', 'dd/mm/yyyy') start_date, 20 passengers from dual union all
                select 17 id, 6138 busno, to_date('08/10/2009', 'dd/mm/yyyy') start_date, 18 passengers from dual)
-- end of mimicking your data; use SQL below:
select busno,
       min(start_date) start_date,
       max(start_date) end_date,
       sum(passengers) total_passengers,
       max(passengers) max_passengers,
       max_pass_date
from   (select id,
               start_date,
               busno,
               passengers,
               distance,
               max(start_date) keep (dense_rank first order by passengers desc) over (partition by distance, busno) max_pass_date
        from   (select id,
                       start_date,
                       busno,
                       passengers,
                       -- using tabibitosan method, borrowed from Aketi Jyuuzou
                       dense_rank() over (order by id) -
                          row_number() over (partition by busno order by id) distance
                from   my_tab))
group by busno, distance, max_pass_date
order by min(id)

     BUSNO START_DATE END_DATE   TOTAL_PASSENGERS MAX_PASSENGERS MAX_PASS_DATE
---------- ---------- ---------- ---------------- -------------- -------------
      4123 04/10/2009 06/10/2009               78             25 05/10/2009
      6138 03/10/2009 04/10/2009               70             22 04/10/2009
      4123 07/10/2009 11/10/2009               65             27 08/10/2009
      6138 05/10/2009 08/10/2009              109             24 05/10/2009

First selected item in the list of choices LOV
Hello
Dears, I want only the first element selected from the list of choices on the form. Everything by applying a LOV on any attribute, I didn't see any of of the first selected element.
Please help me
Thank you
Sultan,

As I said, try to set a default value for the attribute, unit of MEASURE at the level of the entities. So when you create a new line, the COS will be default with this value.

Is of the same kind of work example: http://adf-use-cases.googlecode.com/files/SelectOneChoice.rar

I hope this helps.

Image display according to the value selected from the bean of choice
Hello

I have a table with columns of bean of choice and have an another bean image

based on the value selected from the bean of choice of a particular line, I want to display an image in the column of bean image

and it is particularly in the line, in which the user changes the value of the bean of choice.

Please help me

Thank you
Hello
H1.

If I choose 'user' of choice its not display any image, but I need disabled display images it

-have you set the URI of the Image of the time of the image?
-deleteicon_enabled.gif N deleteicon_disabled.gif

Concerning
Meher Irk

Published by: Meher Irk on October 24, 2010 12:18 AM

I want to update the field of choice of option on the selection of another field of choice of option

Hello...

I want to update the field of choice of option on the selection of the value of the choice field another option.

Thanks in advance

Welcome on the support forums.

use

http://www.BlackBerry.com/developers/docs/6.0.0api/NET/rim/device/API/UI/component/ObjectChoiceField...

to set the new choices in the field. It should update automatically, otherwise you could try to call invalidate.

Earth 2160 loses control of the mouse and the keyboard at the player selection screen, help

I bought Earth 2160 gog.com installation and download went well. However, when I try to play the game it crashes at the player selection screen. Followed by loss of control keyboard and mouse, audio and video continues however (if you have played the game you'll know what I mean). Now Ive downloaded June DirectX run time package, re-downloaded the game download the latest DirectX web installer, thus, run as admin and tried a solve compatibility issues. None of them seem to work. If someone knows how to fix this please tell me.

Hello

1 did you changes to the computer?

2. this question involved playing the game?

Method 1:

I suggest you perform the clean boot and check.

Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

Method 2:

I would also update you mouse drivers and the keyboard of the computer manufacturing and check.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/is-is/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

I also suggest you to contact game support and check out.

http://www.Gog.com/en/support/earth_2160

Help in the selection of the image...

Hello
I'm kinda a beginner so please be patient with me!
I have searched high and low for the answers I need, and although there are related subjects, nothing is quite as precise I need as it is...
I'm an artist/Illustrator working in gouache on watercolor paper. When I scan my works in the texture and color of the paper are supported and I need a way to select my image with precision and then copying it on a white background, new or just make the white background.
I tried the quick selection and magic wand tools, but if my work is quite detailed with a lot of jagged edges (and a variety of colors), you can imagine it's a nightmare getting a good selection. I also tried using an adjustment layer and raise the level of white, but everything in it contributes to the background he throws the rest of my image.
My current method is to make the changes that I need (contrast etc) and then erases (or paint) the background. This works well but the problem is only on my very detailed parts, with the work around the hairs and the pieces of grass and others, it is taking me hours and hours (hours and hours) and I worry about missing sections / lack of precision.
Is there an easier way? Anyone in the same boat? I don't mind if it's the only way to do it, I myself would come only if there was some fancy shortcuts, I don't know!
Thank you in advance to anyone who can help...
Kate

1. open the file and trash of the lock of background layer.

2 press and hold the command key and click the new layer icon in the layers panel. He will place a layer below the layer of the image.

3 Edition > fill and fill it with white.

4 return the layer of the image, and then double-click it to bring up the layer Style.

5 perform the indicated setting. To split the slider, hold down the Opt key

(Unreduced 300 ppi size, the end of the highest point of the scale is a tad stronger)

***

In order to demonstrate that the background is white flat, I changed the white to black

Help with the query to select only one record from the result set in double

Hello
Please help with the query. Version of Oracle database we use is 10g R2.
I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec
ID
Org
DF
Sec Sub-Sec

(163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1
My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.
ID
DSB

DF
SEC
Sub-Sec
(163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

Thank you
Orton

Hello

This sounds like a job for ROW_NUMBER:

WITH got_r_num AS

(

SELECT id, DSB, df, s, sub_sec org

ROW_NUMBER () OVER (PARTITION BY ID.

ORDER BY org

) AS r_num

OF view_x

)

SELECT id, DSB, df, sub_sec s,

OF got_r_num

WHERE r_num = 1

;

He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

I hope that answers your question.
If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data. (I know that you said that you were a view selection. Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places. (I didn't quite understand the explanation above. I don't know why you want to

ID ORG DF DRY SUB_SEC

-- --- -- --- -------

1234 CQ DPRK DPRK HD

and is not

1234 IS CQ ASIC, ASIC

or

TS 1234 IT IT SW

or

1234 CQ ASIC ASIC HD

)
If you change the query at all, post your modified version.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).

See the FAQ forum: https://forums.oracle.com/message/9362002

Need help on how to load lov accoding to the value, select locale
Hello
My scenario is, I'll have two buttons. A single button for local (English) and another button for local (Nl) Dutch.
I have a table of database that hold the 2 columns, which are en and Nl.
I load this value of columns using a Lov
When I click on the en button, Lov sholud load according to valus in the database column in and when I click on Nl it touches sholud charge Lov according to the values in the Nl column.

I use a managed Session bean that allows to set the locale.

I've implemented this scenario, but I had some bad problems.
(1) my implemented method is not recommended as a best practice
(2) lov dosagesn can't change until I click a value to this topic.

In the query select lov, I used the link variable and value as adf.context.expressionEvaluator.evaluate('#{UserPreferences.language}')

It is not recommended, so please help me to do this with best practices.
Thank you.
in your bean writing managed code below
```
        FacesContext facesContext = getFacesContext();
        Application app = facesContext.getApplication();
        ExpressionFactory elFactory = app.getExpressionFactory();
        ELContext elContext = facesContext.getELContext();
        ValueExpression valueExp =
            elFactory.createValueExpression(elContext, "#{data." +"APPLICATION_MODULE_NAME" +".dataProvider}",Object.class);

            AppModuleImpl am =(AppModuleImpl)valueExp.getValue(elContext);       // here AppModuleImpl is the application module Impl class name
            ViewObject myVO = am.findViewObject("VIEW_OBJECT_NAME");
            myVO.setNamedWhereClauseParam("BIND_VARIABLE_NAME", "VALUE_OF_BINDVARIABLE");
           myVO.executeQuery();
```
and test, hopefully this solves the problem :)

Help in the selection of a part of the image and turn it into an object...

Hello world
I've never used Adobe, please bare with me. I have an image that has an object (a tree), I would like to extract and insert it into a different document. I spent a lot of time to clear the surrounding area of the photo to see it become white. I want to have nothing more than the tree. No white background or whatever it is. I know that this may be a very simple task, but as I said, I'm a newbie. Help, please!

I have PSEv.8.

I used the brush selection (A) tool that has worked well. After the selection is made (the "mobile dash" have been around the whole tree), I went to layer > new > layer by copying. This put the tree on its own layer.

There were a couple of areas I've airbrushed with the Eraser tool. The checkerboard pattern indicates the transparency.

You can copy & paste this selection into another file

.

Need help with the use of GROUP BY in a select statement UNION

I am writing a query that allows to combine a legacy system that interfaces it is trial balance in the Oracle of R12 GL. It was only meant to continue for a month or two, but it is likely to continue for 6 months. Please Auditors Auditors, to provide proof that the system is in balance with Oracle GL. By my verification requirements, I need to make a full reconciliation from the month of conversion (life in the amount of date), then PTD for each month.

The legacy account is placed in attribute1 on the lines of the journals. Uses of the old system balancing segments that are also used on the platform in Oracle for this division, i.e., Procure-to-Pay has been cut over Oracle, but not everything yet. So, I can't count on the GL_BALANCES table for the info, I get from the JE_LINES.

My problem is not the only request for the month. But when I try to combine the queries with a Union, to aggregation of each measurement period in its own column, the group is necessary after each selected instruction rather than allowing me to put at the end of the UNION. (When I put the group by at the end of the UNION, I have the 'not one group' function)

So I get duplicate for each month of discrete measure accounts. When I duplicate in my Oracle database accounts, I can't count on the VLOOKUP function in excel to exactly match an account of inheritance. I know there are more sophisticated ways to provide this output, but I'm hoping to get this info in a simple query.

Thank you in advance for any advice you can provide

Example of data output (the goal for me is to get the two rows to appear as one based on common points on the LEGACY_ACCOUNT and the ORACLE ACCOUNT

The LEGACY ACCOUNT	ORACLE ACCOUNT	JUN_15	JUL_15	AUG_15	SEP_15	OCT_15	NOV_15	DEC_15
010000001109000003584	190-600552-1001-100231-000-0000-0000-0000	0	0	-242961.04	0	0	0	0
010000001109000003584	190-600552-1001-100231-000-0000-0000-0000	0	192588.02	0	0	0	0	0

Here is a simplified version of my code that returns both records. In my research, I had found a number of conversations where it has been shown that the group could be put at the end of the select statement. However, when I remove the group from the first select statement I get SQL error: ORA-00937: not a function of simple-group

Select

l.attribute1 LEGACY_ACCOUNT,

JUN_15 TO_NUMBER('0').

JUL_15, sum (NVL(l.accounted_dr,0.00)-NVL(l.accounted_cr,0.00)),

TO_NUMBER('0') AUG_15.

TO_NUMBER('0') SEP_15.

TO_NUMBER('0') OCT_15.

TO_NUMBER('0') NOV_15.

DEC_15 TO_NUMBER('0')

b GL.gl_je_batches,

GL.gl_je_headers h,

GL.gl_je_lines l,

GL.gl_code_combinations c,

GL.gl_je_sources_tl j

where b.je_batch_id = h.je_batch_id

and h.je_header_id = l.je_header_id

and l.code_combination_id = c.code_combination_id

and h.je_source = j.je_source_name

and c.segment1 ('190 ', '191', '192', '193', '194', ' 195 ', ' 196',' 197', ' 198 ', ' 199',)

('200 ', '203', ' 205', '206 ', '330', '331', '332',' 333 ', ' 334',' 335', ' 336 ', ' 337')

and j.language = 'en '.

and h.PERIOD_NAME ("JUL-15'")

Group

l.attribute1,

UNION