Help browser blackBerry Web Q10.

Similar Questions

• Field of browser BlackBerry 2: Crash when loading web page with the County to expand

  I use the browser Blackberry 2 custom field in my application to display local html pages that I load device SD Card. For the few notes I met the application crash.

  I quickly tested behavior Blackberry browser for these pages and found that it crashes too. Steps to reproduce:

  1 torch 9800, operating system. 6.0

  2 copy attached to SD card files

  3. access to these files by using application "files."

  4. try to open the test.html file by clicking on it.

  5 blackberry browser will crash.

  Issues related to the:

  1. scope of browser Blackberry 2 uses the same API as Blackberry browser on platforms 6.0.x?

  2. is there no work around for this problem?

  Mark,

  Thank you for your comments. But I finally found the solution me

  The solution is the following:

  (1) change us html so that it will contain no image resources.

  (2) for each image resources, we create something like

  or any other appropriate HTML element. Here, we will retain certain information that will help us identify how and where we need to charge, a kind of identity.

  (3) first load us the HTML page in the application. It should load without any problems.

  (4) then call us the JavaScript function that will replace our

  items with images using the timer. It is possible with BrowserField2.invokeScript (). When the script will replace an HTML element with element, which could cause some resources load (I mean handleResourceRequest), so you should run with it.

  I tested this solution in my application and crash problems have been solved even when we have a lot of images on the web page stored locally in the device memory or on the SD card.

• BlackBerry Q10 can someone help me: blackberry q10

  Hey everyone I hope everyone have a nice day
  my blackberry yesterday q10 I can't connect to my wifi bbm don't know why
  and it is there no blackberry then the wifi logo when I turn on wifi
  I don't know what to do
  Please I need help

  Have you tried to access it from tbe application so the hub? Did you change any information on your phone recently? Maybe update your profile bbm take-away? Have you tried pulling your battery for a hard reboot? You leave the phone on and remove the battery, count to 10. Then replace and put it back on. I hope this helps.

• I get the message: firefox does not when I try to browse the web sites

  For some time now, when I load a web site, it takes a long time to load and then I get the message: firefox does not, or long-running script and does not. This occurs on many web sites, and when that happens, it takes a long time to browse this web site. I also have this problem on other browsers. Any suggestions as to what might help? Thank you.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then "Claire recent history...". ».

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Error when you try to play multimedia files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  ERROR: Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web.

  I get the error Windows Media Player 11.0.6001.7007.  "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web frequently. "What happens on the music or video files even those I had on my PC for a long time.  They work some days and other days they don't.  I have to reboot to clear it and it's really annoying. I can read a file and then 10 minutes later the same file will not play.  Sometimes after the error message, if I don't click Close, the video is not yet but the audio will not.

  I'm on a laptop HP DV5 with vista 32-bit and 4 GB memory such that shipped HP (Yes, 4 concerts and 32-bit).

  I don't know if it was related, but IE7 would continually fail to open, click on through the windows and should be completely closed.  essentially the WMV and IE are fails miserably on this laptop, and it was only 6 months old.  Firefox fixes my problem of browser.

  How can I fix this WMV as I can't UN/reinstall with Vista?

  I ran sfc/scannow after completion of the analysis, the results were that "windows resource protection finds corrupted but files could not solve some of them" gives then refers to where the cbs.log file is located. I tried to open the cbs log, and he says that access is denied.

  UPDATE: there seems to be a conflict between WMP and any other application that opens which can play the video with sound.  When I close firefox, and then the videos and sound can play (these same questions happened on IE7 and firefox was installed just yesterday).  I met the same problem with more than Pinnacle video editing software.  Is it possible to change a parameter with WMP as there is no sharing violation during a different application can play the video?

  SO thanks a lot!    I had to use the following steps to get your simple solution:

  1. Select Options under the button 'SYNC '.

  2. choose 'other Options '.

  3. click on the tab 'network '.

  4. only check box RTSP/TCP and HTTP and Multicast Streams allow the player Pourrecevoirun multicast stream (which meant I had to uncheck "RSTP/UDP"

  5. click on apply and take advantage of my windows media player.

  Thanks a lot wmd_user!

• Wireless "Limited access" on Win7, but able to browse the web

  Hello

  My adapter wireless displays always the connection either with "Limited access", but I am able to browse the web. This is regardless to connect to public wifi or local wireless connectivity in airports etc...

  Please help on the options available

  Concerning

  Hi Jyothi,

  Thanks for choosing Microsoft Community!

  According to the description of the problem, the wireless connection has limited access.

  Let us try the following methods:

   

  Method 1: Run the Network Troubleshooter:

  Refer to: using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-in/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Uninstall and reinstall wireless drivers.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, click with the right button on the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Refer to:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

   Hope the helps of information. Keep us informed.

   

• There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  Outlook has been changed from hotmail, my emails say don't link with windows media player, outlook is not their problem, but it happened only when they merged account

  I have to be able to open MP3 files that ae sent emails in my work, it's urgent, please I need to know what settings to correct to sort this please

  It comes to getting the error message

  There was a problem playing this file. (0xC00D0FEA: "Windows Media Player has encountered a problem during the download of the file.) For any additional help, click Help on the Web. »)

  E-mail address is removed from the privacy *.

  Hello

  Method 1:

  See the article and check if that helps:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Method 2:

  I suggest also refer to the thread with a similar problem and a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-when-trying-to-play-media-files-Windows/4abe7be7-b3fe-44eb-b4da-e0848c3c8bd4

  It will be useful.

• Error when you try to play .wmv files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  Will not play WMV video files

  I'm having a problem to play wmv. video files.  I have windows vista.  I can play music in Windows Media Player, but can not play any video, that is sent to me by e-mail.  WMP crashes and give a message saying that Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web.  I click web help and receive nothing.  The drivers are up to date.  Why I can't play videos? Thank you

  Hello Henry Michael,.

  Please relay the e-mail program you use.  You can also try to save the file directly on your local computer, and then check if the file is being read correctly. If there has been any recent codec package installation, you can also try to temporarily uninstall the codec package and then check out the question.

  Thank you

• Browser BlackBerry 10 rewritten URL with subdomains

  Hello

  I wonder why the browser blackberry 10, in the Simulator, seems to change any url with a subdomain (for example, when trying to hit example.domain.com, the resulting url in the address bar is replaced by domain.com )?

  See you soon

  Hey!

  We do this as a preventive measure against phishing attempts. For example: a phishing site has a url "en.facebook.com.asdlfkslkfsdf.phishing.com", we used the original method could potentially cut the url to a point where only "en.facebook.com" is displayed to the user. With the new method, it would display "phishing.com".

  We're still tweaking a bit to make it a little smarter about when to use this method and when to leave the URL intact.

  You can still see the full URL by the expansion of the address bar.

  Rory

• ODA IP ASA when you browse the web via remote access vpn

  Hi all

  I was wondering if it is possible to configure an ASA5510 in a way to allow users remote access VPN use external IP of the ASA when browsing the web. So what I'm looking for is a solution to hide my IP address and use the IP address of the ASA, when browsing.

  The firmware version of the ASA is 9.1 (6)

  Thanks in advance

  Hello

  What you want to achieve is calles u-turn.

  You must enable the feature allowed same-security-traffic intra-interface

  For the configuration of the asa, here's the Cisco documentation (I don't copy paste on the post):

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem

• Browser BlackBerry facebook SDK login error

  I recently spent to use the SDK Blackberry facebook pot to using the source code of projects (excerpt from the tag that the pot was built in)

  .

  Since this switch, I've known browserfield problems:

  On a device, the load chart persists until I have regularized.

  On a simulator, I see:

  "Error calling content for.

  https://www.Facebook.com/dialog/OAuth?scope=user_about_me, user_activities, user_birthday, user_educati...

  Null error message. »

  where APPLICATION_ID is my correct application ID.

  The URL above will open fine in my PC and even on the browser Blackberry browser when stuck and I debugged for some time by the source of the facebook sdk and found that the earphone returngs browserfield "error: [URL]" when he tries to load the content.

  Has anyone seen similar behavior with the source SDK Blackberry code before?

  Unfortunately time did not allow me to analyse the sample with our tools or to implement the Blackberry eclipse for the trial or the other plugin.

  I went back to using the pot and put in place 2 draw up profiles for 5.0 + (including pot) and pre5.0 (does not include jar).

  Thank you

• Desperately need help from blackBerry Smartphones - I can't read my messages PIN.

  I have a Storm 9500 and does not know how to read my PIN messages. I work away from home and so my manual, and for all the google/BlackBerry forum research I did, no one explains how read , only send them.

  My companion with a new curve took my PIN and me by post, and all I get is the envelope in the upper left corner with a growing number, that has got to be the PIN messages, as my email is all set up and working properly (and the number goes down when I delete emails). There must be a together simple procedure, but for the life of me I can't find!

  I called Vodafone who could help, as BlackBerry do not PIN message support! (?)

  I want just the bl * envelopes dy to disappear! Help, please.

  NAT :-(

  ethosb is correct, and if you still have problems that maybe it's because you've hidden your main message folder.  In the home screen, press the BB Menu key and select this option to display everything.  You should then be able to find the folder with the message of PIN code for your friend.

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• Problems of graphic import help on the Web. RH7

  Hi all:
  
  I work in a project of technical manual that we prepared in Microsoft Word 2007. We recently purchased Adobe Robohelp 7 to create a help on the Web for our system.
  
  After importing a 200 page manual with several graphics (GIF) in a project to help on the Web, we can see the whole manual to draft HR 7, but the graphics are missing, we have seen the legend which was below each chart. In some cases (after re - import the word file), the image file was created but no images were inside the project view. In other cases, there was simply not at all the image folder.
  
  I tried to delete the images folder and re-create it, but it did not help. I also tried to import the graphic into the project folder, but I can't find a way to do it.
  
  When I went to windows Explorer and navigate to the project folder, I notice the pictures folder was there and all the graphics were inside. Why they are not imported in the project...
  
  Any help will be be very happy.
  
  Thank you in advance.
  
  Kind regards
  
  
  Rafael
  
  
  
  
  

  Dear Peter:

  Thank you, but we were able to solve it today.

  The solution, we copied the entire manual in a new word using the file copy - paste, recorded as test.docx and tried to import it again in HR 7. Now the imported document is OK, with all of the graphics is not displayed correctly.

  We cannot send the manual out of the Office since its confidential.

  Take care.

  Best regards.

• Different help for different Web Site areas

  I am facing a big enough task to work. Here's the scenario: there is a web site (AKA the parent domain) parent who is using the Site. The web site parent has several subsites (subdomains). Each of those subsites need to have their own help, which may be different from using the Site displayed in the site parent, but still need to use the same source files and output. Creating different projects for each subdomain is not an acceptable option for several reasons. We must be able to 'turn on' and 'disable' visibility in selected pages and information on the selected pages.
  
  How can this be accomplished without generating (and the maintenance of separate projects) for each subdomain?
  
  Example usage: using the Site for the website parent has three help pages to create a survey - 1) seizure of analytical data, 2) download the survey and 3) edition of the survey. On the Edit poll page, there are 5 fields containing information that the user can change. Site Help for the subdomain of the web site parent may just have two of the help pages - enter summary information and edit (no download page of the survey) survey. Also, on the edit poll page, only 3 of the 5 fields can be changed - the other 2 fields must not be displayed using the Site for the subdomain.
  
  How can I use the same Site Help for the web site parent and the subdomain (i.e. use the same source files and output files), but hide the loading survey page and hide the 2 of the 5 fields on the edit poll page in aid of the Site for only the subdomain? I already thought about the use of conditional compilation tags, but it seems to me that this would require generating different projects (for example, different output files) and I doubt that it will be an acceptable solution for our needs.
  
  Thanks in advance to anyone who can help me.

  Your product "structure" reminds me of product from my client. Four years ago, it was similar to your description. Today, it has evolved and applications 'tailor-made' are based on a basic application, but EVERYTHING is kept separate until subdirectories for each topic within the app. Even my help reflects this subdirectory of application and the file naming convention. This makes it much easier to keep track of all of the project for a client gave (the 18 500 files for my client).

  If possible, to manage the aid project in pieces. Due to the structure of the domain (subdirectory) void help right from the start. The only place where it gets referenced is in the Site Help links and this is better managed as projects merged, as suggested by Peter Grainge.

  The 'core' Help is that you create and provide to the developers of project. Don't forget to provide a detailed list of the names, titles, functions, etc., and instructions on how to import basic assistance in a new project to help customize for customer. With this approach, you need separate directories of project on your servers as each project custom generated help will have common file names but different content. The positive side to this is easy using the Site maintenance when a subproject of field is updated.

  So how is your architect approaching the application? Do you use a container (common) window with other frames, fields, or combination of the two, which are populated based on a previous selection? Or y at - it a unique window based on a previous selection? How aid is requested in GUI - a help button / icon, hotkey - the call triggers a JavaScript written to your application toolbar? You use the simple call to RoboHelp style or is it suitable for reading the file name of the displayed content window? Could use a lot more information to help set up an approach.

  I think you have a lot to plan in advance and more than one session of stop in the head with the developers. Good luck!

  Kind regards
  GEWB
  (been there, done that... got the bruises to prove it)