Similar Questions

• Need help, cannot connect to http sites, https only...

  BLUF: I can connect only to HTTPS Web sites, http gives me 'unable to connect to the server' or "no route to host" errors.

  While I was out of town, the woman finished downloading something on his MBP that cause a lot of pop-up ads any time during the use of the internet.  I ran Malwarebytes Anti-Malware and it found and removed a bunch of infected files.  All this while the computer was on OS X 10.9.x. Since that time, on any browser (firefox, safari, chrome) we can only connect to the https pages.  For example, http://www.google.com = no go "impossible to connect to the server...". ", while https://www.googlec.com = good, but unfortunately most of the links is http, so it is useless.

  I spent most of the last days 2 pouring on the forums, and troubleshooting to resolve this question... what I did:

  Reset my router (without success, all the remains connected to it is good (everything else is also Android/windows))

  Reset my modem (even had my ISP reset everything they could on their end too)

  Back to zero/reinstalled all browsers,

  erased the PRAM using the option + command + p + r at startup.

  verified that no Proxy box is checked in the advanced network settings

  tried to change the DNS, manual, auto, opendns, 8.8.8.8/8.8.4.4, using my ISP DNS googles, nothing changes.

  uninstalled all that was installed last week (not a lot, but now I don't know what it was).

  disabled the browser all extensions/plug-ins.

  IPv6 disabled/re-enabled (set to auto),

  What works:

  Safe mode, internet is full to the top.

  While in safe mode, I was able to connect to the app store (could not in a regular connection or guest user) and upgrade to OS X 10.11.5, but even the installation that does not solve all missing / corrupted files, I always have the same question.

  I thought for sure the new OS would have fixed it, but now I'm really stumped.

  Is there a way to reset completely all network settings? Could get blocked port 80 (http)? How can I tell?

  Any help would be appreciated,

  v/r

  Sean

  (a husband who knows enough about computers to really break, ha)

  First, never use any type of software "anti-virus" or "anti-malware" on a Mac. That's how cause you problems, not how you solve them.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The procedure is easy to do right, but it is also easy to do wrong, so I had very detailed instructions. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin") in Safari. Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Cannot connect camera Basler USB 3.0 to IMAX

  Hi all

  I have a few question about connect the Basler USB 3.0 camera with LabVIEW.

  I use camera Basler acA1600-20um, it does not appear on my NOR-MAX.

  in fact, there are only "Basler USB3 Vision camera 'USB-0' ace' and the error when I try to click on it.

  Can someone help me?

  Thank you

  Racha

  Thanks for posting the error screenshot...
  -You have been able to connect using Basler pylon software?
  -can you right click on the "Basler USB3 Vision camera 'USB-0' ace and the driver NI-IMAQdx and then see the change?

• New XBOX 360 S cannot connect with Linksys WRT54G2

  I can't connect the XBOX 360 (the new model S) w / XBOX Live through my Linksys WRT54G2.

  After automatic settings did not work, I tried a few manual instructions here:

  http://homecommunity.Cisco.com/T5/wireless-routers/WRT54G2-issues-when-it-s-plugged-in/m-p/207071?Qu...

  But it does not work.

  Note: I have a laptop and an iPad that connect to the router fine.

  Ideas?

  I went through and powercycled the modem cable, router and xbox in order... and now it works for some reason any.  I'm almost certain that this is the FIRST thing that I tried 2 hours ago.  So, I hope that the connection is not puff over time.  We'll see.

• Cannot connect camera Canon Rebel for Windows 7

  I got a Canon Rebel camera with a large memory chip. My old printer had a port for the chip but my other does not work.  When I connect my camera directly on my computer Windows 7, I get "Canon camera has not a driver", nor can it find a driver on the web. I know I downloaded the images from this camera before.   How ca I download the images?

  Wednesday, October 3, 2012 20:56:59 + 0000, richardsloat wrote:

  I got a Canon Rebel camera with a large memory chip. My old printer had a port for the chip but my other does not work.  When I connect my camera directly on my computer Windows 7, I get "Canon camera has not a driver", nor can it find a driver on the web. I know I downloaded the images from this camera before.   How ca I download the images?

  You can buy a USB memory card reader very little expense. TO
  Amazon.com, they begin to 1.46 USD.

  I always prefer using such a reader, rather than connect the camera.
  The drive uses no battery in the camera and it's quick and easy to
  use.

  I have two of these drives. An I keep on my desk, one in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Help! Safari cannot connect to the server

  I really need help! I tried to forget the network and turning it back on, I have disabled the firewall and remove all extensions of safari. I seems that nothing works.

  I get the message 'Safari cannot connect to the server' on almost every site except this and facebook. I can't enter same Urbanoutfitters.com or ASOS. I just got the message "Safari could not connect to Server" I'm not a computer genius so hopefully someone here can help me...

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• HELP "the mac cannot connect to iCloud by.

  
  

  I had this problem for over a year now and no solution possible.

  
  

  "the mac cannot connect to iCloud due to a problem with"iCould id", open preferences to iCloud to solve the problem"

  
  

  
  

  I have tried every single solution available on the internet, tried deleting tried Keychain Icloud signature and signing in again once I've even installed a clean but nothing seems to solve this persistent problem.

  
  

  I would really appreciate if you guys helped me with it.

  Thanks in advance

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  ls -@BOaen L*/Keyc* | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.

• "Skype cannot connect. Get help with this problem.

  Well, I downloaded Skype. Then, I connect to my account. And an error on my computer screen that says "Skype cannot connect. Get help in solving this problem. " Someone help me solve this problem?

  Make shure that your firewall is disabled. If you have installed.

• Cannot connect digital video camera

  Hello

  I tried in vain for hours connect a digital video camera to my Vista computer. I tried the camera on other computers and cannot connect to them either. It's a Sony Handycam and I used 4 Pin/4 Pin firewire cable 4 pin/6 pin. I also tried a USB cable. I'm running the camera in the game while restarting the computer, I tried to turn the camera on or off when you are connected to the count. I checked the settings of the camera and they all look great. I don't think that the problem is with the camera because I downloaded the video in addition to him in the past, but only once. Is there a chance that a Vista update caused vista to no longer recognize my camera?

  Thank you

  Russ

  Hi GraceRuss,

  It is unlikely that an update is the problem with the camera because the camera does not work on any machine. Looks like that there is a problem with the camera or a problem in the connection. You must consult the instruction manual provided with your product first and then consult with the support of sony. Thank you, Jeremy M - Support Engineer

• Help! Setup Wizard cannot connect to the router!

  I tried several times to install this router wireless MO # BEFW11S4.

  I get an error message that Setup Wizard cannot connect to the router!

  I pressed the reset on the back button each time, it is turned off, check the cable connections between the modem cable to the router, then router to the computer.

  After dropping out of the router and connect the PC to the top with the modem, the PC is then connected to the internet once more.

  How to solve problems, or isolate the problem as a bad router?

  Please send me a PM for any suggestions or help.

  Thxx

  (Note to mod: Email address removed.)

  Thank you very much this has helped. You don't mention there was a button "generate" to create the password agorythm code to use as a password.

  Thank you! Problem has been resolved.

• Cannot connect to all games online with router Linksys, (WTR54G)

  I've tried everything, and this problem is fairly recent. I can run the internet just fine, but when it comes to connect with STEAM or any other multiplayer games, simply don't connect. I tried to take on the walls of fire and port forwarding. I also tried to use a static IP address, nothing. I have seen many others with this problem and they never have the problem sloved. Hope you can help me.

  Called my brother and fix the problem, it is the COMODO. Even when you turn it off it always runs in the background and it does not leave out all connections. Linksys should have thought of that after that they told me 500 different things.

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• I had an existing version of CC student that has now expired. When I go on my account that it says that I have a free version of 30 days, but none of my programs open, I get that I need to subscribe or that it cannot connect to the server. Help

  I had an existing version of CC student that has now expired. When I go on my account that it says that I have a free version of 30 days, but none of my programs open, I get that I need to subscribe or that it cannot connect to the server. Help!

  If you have a subscription, you have no programs to call yours.  Get a subscription and the problem should be solved.

• Creative cloud tells me that it cannot connect to the adobe servers. It worked fine for about a year. Now I can't access any of my programs. I'm losing money. Help

  Creative cloud tells me that it cannot connect to the adobe servers. It worked fine for about a year. Now I can't access any of my programs.

  I was not able to launch Lightroom or Photoshop to round a week now.

  I'm losing money. Help.

  Pay your membership subscription on time or lose access to your work, your programs and potentially your livelihood.