Similar Questions

• Mailing address: is it normal that the outgoing servers use different Port # on each device?

  I have problems with my Mail app, so I'm systematically review all parameters. Noticed that the port of the outgoing server is different on Mac, iPhone and iPad. Is this normal, or they are all should be the same for an e-mail account given?

  They should be identical, unless you use different protocols or of the security mechanisms on each device as a pop on a device and IMAP on another device or by using ssl for connection and tls for another. Check all the settings not only ports.

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• NEED HELP WITH THE CANCELLATION-CANCELLATION FEE IS CHARGED AFTER TWO TIMES SAID THERE WERE NONE!

  Two different agents Adobe told me that I would no charge on my account if I canceled today that additional images, I bought, but when I moved to cancel online I was messaged I would have to pay £130 odd.  It's not what I was advised.

  Hello

  Your subscription has been stopped and there will be no cancellation fee.

  My apologies for the confusion caused.

  Kind regards

  Bev

• Photosmart 6510: How to prevent the printing of a file report after each print job. It wastes a lot of paper!

  Advice would be appreciated!

  You are welcome.

  Open Word and then click on the word or on the file menu and select Preferences.

  Click on print, then clear "Properties of the Document" in the section "Include document."

  Please let me know if this is useful,

  Shlomi

• the list widget with different colors for each item in the list?

  I'll add a widget list to my interactive color wheel:
  
  * http://r0k.us/graphics/SIHwheel.html
  
  It is an old applet, first published in 1998 and older than Swing.
  
  The list contains the names of color 1 567 which he knows the color values. I want the background color to each element to be one of the named color. The forefront color name text will be white or black, chosen for readability to her background. Basically, I'm hoping to accomplish what the name of this color page did with its list widget HTML-form:
  
  * http://chir.ag/projects/name-that-color/
  
  I studied the java.awt.list document:
  
  * http://download.oracle.com/javase/1.4.2/docs/api/java/awt/List.html
  
  SetBackground() and setForeground() methods are implemented, but they seem to apply only to the list as a whole. As far as I know, it seems there is no access to list items themselves as components. I hope that I am just missing what is obvious.
  
  -Rich

  What you want to do can be easily implemented on a JList swing, with the help of a custom converter. I would advise therefore to rewrite your applet in the swing, then use a JList. That way you can skip JUnit is studying just to force your applet awt to do something of awt was neither designed for and focus on swing of things GUI. Below is an example of how you can implement your JList:

  import java.awt.*;
  import java.math.BigInteger;
  import java.util.Arrays;
  import java.util.Comparator;
  
  import javax.swing.*;
  import javax.swing.event.ListSelectionEvent;
  import javax.swing.event.ListSelectionListener;
  
  public class ColorList {
  
      public static void main(String[] args) {
       SwingUtilities.invokeLater(new Runnable() {
  
           @Override
           public void run() {
            new ColorList().createGUI();
           }
       });
      }
  
      private void createGUI() {
       String[][] array = getArray();
       // sort the array as you wish
       Arrays.sort(array, new Comparator() {
  
           @Override
           public int compare(String[] o1, String[] o2) {
            return o1[1].compareTo(o2[1]);
           }
  
       });
       // create the JList
       final JList list = new JList(array);
       // set some adequate renderer
       list.setCellRenderer(new DefaultListCellRenderer() {
           private static final long serialVersionUID = 1L;
  
           @Override
           public Component getListCellRendererComponent(JList list,
                Object value, int index, boolean isSelected,
                boolean cellHasFocus) {
            DefaultListCellRenderer renderer = (DefaultListCellRenderer) super
                 .getListCellRendererComponent(list, value, index,
                      isSelected, cellHasFocus);
            renderer.setText(((String[]) value)[1]);
            int color = new BigInteger(((String[]) value)[0], 16)
                 .intValue();
            renderer.setBackground(new Color(color));
            renderer.setForeground(new Color(0xFFFFFFFF ^ color));
            return renderer;
           }
       });
       final JLabel demoLabel = new JLabel(
            "Display this text in the selected color", JLabel.CENTER);
       list.addListSelectionListener(new ListSelectionListener() {
  
           @Override
           public void valueChanged(ListSelectionEvent e) {
            String[] selected = (String[]) list.getSelectedValue();
            demoLabel.setForeground(new Color(new BigInteger(selected[0],
                 16).intValue()));
           }
       });
  
       JFrame frame = new JFrame("ColorList");
       frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
       frame.add(new JScrollPane(list), BorderLayout.LINE_START);
       frame.add(demoLabel, BorderLayout.CENTER);
       frame.pack();
       frame.setLocationRelativeTo(null);
       frame.setVisible(true);
      }
  
      private String[][] getArray() {
       return new String[][] {
  
       { "000000", "Black" },
  
       { "000080", "Navy Blue" },
  
       { "0000C8", "Dark Blue" },
  
       { "0000FF", "Blue" },
  
       { "000741", "Stratos" },
  
       { "00FF00", "Green" },
  
       { "FF0000", "Red" },
  
       { "FFFFF0", "Ivory" },
  
       { "FFFFFF", "White" }
  
       };
  
      }
  
  }
  

  Piet

• Images on the screen in the list update only after scrolling to the rank of the list instead of updating automatically after each image is uploaded (delayed image loading)

  1. I started a lazy image loader to download images in drawListRow and passed the url of the image to download reference.

  2. After downloading the respective bitmap in the lazy image loader, I cancelled the list (called by using a reference to the screen where images are to shoot) using a thread event as follows:

      UiApplication.getUiApplication().invokeLater(new Runnable() {
              public void run() {
                  _list.invalidate();
              }
          });
  

  But my images are updated on the screen until I scroll over the line in the list.  I also tried to use _list.invalidate (index) to invalidate each line once the image is drawn to this particular line, but it does work and does the same thing as _list.invalidate ().

  I want the images to be updated without scrolling, and as soon as they are downloaded. How do I get there?

  Valuable contributions will be highly appreciated.

  UiApplication.getUiApplication () .invokeLater (new Runnable() {public void run() {_list.invalidate ();})            }        });

  use invokeAndWait instead of invokeLater and check if it works or not?

• What could be the causes of CC 2015 gel after each edition/changes made to the files on the timeline?

  CPU - Intel Core i7-3770 CPU 3.40 GHZ 32 GB RAM

  Club 3D GTX 650 Ti

  Hi QSUF,

  Try this: turn off the Timelne display settings (key) > overview Composite at Trim

  Thank you
  Kevin

• Problems of graphic import help on the Web. RH7

  Hi all:
  
  I work in a project of technical manual that we prepared in Microsoft Word 2007. We recently purchased Adobe Robohelp 7 to create a help on the Web for our system.
  
  After importing a 200 page manual with several graphics (GIF) in a project to help on the Web, we can see the whole manual to draft HR 7, but the graphics are missing, we have seen the legend which was below each chart. In some cases (after re - import the word file), the image file was created but no images were inside the project view. In other cases, there was simply not at all the image folder.
  
  I tried to delete the images folder and re-create it, but it did not help. I also tried to import the graphic into the project folder, but I can't find a way to do it.
  
  When I went to windows Explorer and navigate to the project folder, I notice the pictures folder was there and all the graphics were inside. Why they are not imported in the project...
  
  Any help will be be very happy.
  
  Thank you in advance.
  
  Kind regards
  
  
  Rafael
  
  
  
  
  

  Dear Peter:

  Thank you, but we were able to solve it today.

  The solution, we copied the entire manual in a new word using the file copy - paste, recorded as test.docx and tried to import it again in HR 7. Now the imported document is OK, with all of the graphics is not displayed correctly.

  We cannot send the manual out of the Office since its confidential.

  Take care.

  Best regards.

• Duplicate names and the (different) reports after you convert a user Win 8 to have a Microsoft account

  I have install windows 8 on my laptop and my wife and two children added that users.  The children were standard windows accounts instead of Microsoft code.  Later, I decided to go ahead and give their child Microsoft ID and converted their Win 8 users to use these accounts.  Family fishing now online shows that children appears twice, once for their Win 8 users and once for their event of Microsoft user ID if the laptop only shows one.  I started to have two reports as well as with all the laptop computer acitiviy reported on user input Win 8 instead of the Microsoft ID.  I recently had a Surface RT and added everyone using their ID Microsoft now report Microsoft ID show activity for the Surface and 8 win to the lap top.

  Is there a way to have everything what it under the Microsoft ID and get rid of the seizure of the accounts earn 8 (next to removing users from the laptop and recreate them just with the Microsoft ID)?

  Hi Daruin,

  Yes, what you say is correct, but please also note that the system treats as different accounts with each other, so it will provide two activity reports. If you want to have a single account for your children, you just remove the accounts and implemented it family safe again. Here are the detailed steps:

  1. connect your account on http://fss.live.com.

  2. click on manage the list of the members of the family.

  3. check the name of your child.

  4. click on Remove.

  Add the child account to your account by following the steps in the link below:

  Bind the child account for a Parent account

  If you have any other questions, please let us know.

  Thank you!

• Line does not come after each row of the list

  Hello

  I show a list in my current application. In the list, I paint a line after each line. Just a line of string, I add in each line. Now when I'm checking the list, on some devices, lines are coming. As in Bold 9790, after each line, a line is added. But in the Torch 9810 and curved 9320, line is not there. I don't get why this different behavior for different devices.

  Can someone please help.

  Here is my code:

  public class ListCallBack implements ListFieldCallback{
  
          public void drawListRow(ListField listField, Graphics graphics, int index,
                  int y, int width) {
  
              String text = "xxxxxxx";
              graphics.setFont(FONT_FAMILY_1_SF_AS_08);
              graphics.drawText(text, 10, y, DrawStyle.ELLIPSIS, width);
  
              if (index != 0) {
                  graphics.setColor(Color.BLACK);
                  graphics.drawLine(0, y-12, width, y-12);
              }
          }
  
          public Object get(ListField listField, int index) {
              // TODO Auto-generated method stub
              return mAccounts[index];
          }
  
          public int getPreferredWidth(ListField listField) {
              // TODO Auto-generated method stub
              return screenWidth;
          }
  
          public int getPreferredHeight() {
              return getContentHeight();
          }
  
          public int indexOfList(ListField listField, String prefix, int start) {
              // TODO Auto-generated method stub
              return listField.getSelectedIndex();
          }
  
          }
  }
  

  Thank you...

  The best result I wanted to say, variable height from station to station. So currently I use the line height and made changes accordingly.

  Here is my Code:

   Font f = FONT_FAMILY_1_SF_AS_08;
              graphics.setFont(f);
              int h = f.getHeight();
              int height = (listField.getRowHeight() - h)/2 ;
              y += height;
              graphics.drawText(text, 10, y, DrawStyle.ELLIPSIS, width);
              if (index != 0) {
                  graphics.setColor(Color.BLACK);
                  graphics.drawLine(0, y - height + 1 , width, y - height + 1);
              }
  

  It worked properly. Thanks a lot Peter and Simon.

• iTunes store stops working when I click on the store

  Hello, I am continuing windows 7 64 bit and I've just updated to 12.5.1.21 and my laptop says itunes has stopped working and I have to close the program after I click on the store. I can see my music and play but can't go to the store. Under details, he said:

  Problem event name:	APPCRASH
  Name of the application:	iTunes.exe
  Version of the application:	12.5.1.21
  Timestamp of the application:	57d32fa7
  Fault Module name:	WebKit.dll
  Fault Module version:	7602.1050.4.5
  Fault Module Timestamp:	57 c 12000
  Exception code:	c0000005
  Exception offset:	0000000000645e36
  OS version:	6.1.7601.2.1.0.768.3
  Locale ID:	1033
  Additional information 1:	1761
  Additional information 2:	1761434aed254db142ae93beb247cc5f
  Additional information 3:	6ca 1
  Additional information 4:	6ca18a1a75b11fdbffdfc657fe0130df

  I tried redownloading/install and repair and restart my cpu, but nothing seem to help.

  Thank you

  Hello bigeasy19,

  Thank you for contributing to the communities of Apple Support.

  It seems that iTunes quits unexpectedly on your PC after updating to the latest version. Reinstalling and repairing the app are good steps, and we can offer some additional troubleshooting to help solve this problem.

  Then follow the method on this page to narrow down the cause of the problem: Fix unexpectedly closes or launch questions in iTunes for Windows.

  Best regards.

• Stuck with the location of the store, help!

  My store of the App Store is defined in India because I was looking for a game and he said that it was not available in the United States. Stupidly, I clicked on change store. Now, I can't change it because I have $0,25 USD.

  Click here and ask for help from the staff of the iTunes Store.

  (140051)

• Failure of Options when you click the Dock icon to include 'Desktop in the display (number).

  Failure of Options when you click the Dock icon to include 'Desktop in the display (number).

  I use an iMac 24 "mid-2007. The help documentation tells me how to assign an application to a space is to use this Option. But it does not, while the other three are. Is this an error or something that can be explained? Could there be a work around? My OS is El Capitan.

  Hi peterwhi,

  I understand you are trying to set an application to open its windows on a particular space. To do this, move to the space that you want to use for the desired application, and then choose 'The Office' in the list of options you mentioned see (under Options).

  OS X El Capitan: working in multiple spaces
  https://support.Apple.com/kb/PH21872

  The option that you describe as missing is displayed only if you have connected an additional external display to your iMac and would set the app to open on the iMac screen or the external display.

  Office on the screen [number]: the application opens in the current space on a specific screen (if more than one display is available).

  Sincerely

• Store Windows 8 - I can see the store and apps on it, but I can't access my account or download apps. Help!

  Store Windows 8 - I can see the store and apps on it, but I can't access my account or download apps. Help!

  When I click an app I want to download, there is no button 'install' on the page.

  Then I tried to click on 'my account', 'my applications', 'my preferences', etc, and all I get is this point indirect image that turns on in perpetuity.

  I tried the diagnostics as suggested on the community pages but got no where with it. What should I do?

  Help!

  Hi jojo

  You would not believe what happened.

  The problem got worse. Subsequently, the system refused to even give me a sign on another wifi network other than that I'm a.

  I leave the matter for a few weeks before I turned on the laptop.

  I showed that I needed the Microsoft updates, after which the laptop worked like nothing happened.

  Its a mystery of technology that I will never understand.

  Thanks for your help!

  Cheng