printer stops

Similar Questions

• Printer stops working after update to the Capitan AE

  My Epson AcuLaser M1400 work properly with my previous Mac OS.  Once I have updated to the last, the printer stops working.  When I print a document, the printer stopped - "filter" has crashed.  A problem of 'sehr4ap supposed to quit' report pops up and clicked OK, let it go to Apple.  What is a possible solution to this problem?  Thank you!

  If you have verified that you have the latest drivers installed,

  in SystemPreferences-> printers and Scanners remove the printer with the sign less below.

  Then re install the printer (with the plus sign).

• My printer stop copying

  My printer stop print I hit copy starts with a page of the paper they supply is blocked. canel you also, it hangs. To drive you down to brake loose, that Pinter works OK. can also not scon on PC. Help!

  A get a new printer.

• 1510: new scan printer stop working

  Even after my scan printer stop working. I have scan doctor and it does not find the connected scan

  What can I do, whenever I want to use it, it never works

  Welcome to the community of HP @pete121222,

  I understand that you have lost the connection to the scanner to your HP Deskjet 1510. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

  HP printers - WIRELESS card Scanner is lost (Windows)

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Printer stopped working after I removed a paper jam - Deskjet 6988

  I removed a paper jam today, according to the instructions. But since I did it, it will not be printed. The power light is, as if it's OK, but he absolutely refuses to print.

  My printer is a HP Deskjet 6988 and I am on Windows 7, 64 bit.

  Whenever I try to print, the print queue displays the print job for about a second, then he faints. I try to print again, it disappears. Then, if I do it a third time, it appears in the list and stays there, but the printer does nothing.

  After two minutes the queue no longer mentions it as the "impression". Instead, it says, "error printing". I try to delete the print job, but it just sits there, saying "error printing". It will not erase. The only way to remove it is by the printer stop or restart the computer.

  If I try to print after that stuff all over again.

  I tried closing the printer and reboot, restart the computer, power cycling (stopping the printer, unplug the cables, waiting..., plug again and restart).  I ran the Diagnostic Utility and it tells me that it works very well - well, very good for a very large paperweight.  I used troubleshooting via the Control Panel, and he said: "a print job in the print queue prevents other printing of print." But as I have already said, delete the print job does not solve the problem.  I am stuck in a loop of the removal of print jobs and nothing works.

  Help, please!

  Hey Tigger,

  It may have been stuck in the diagnostic mode - not able to move forward or backward for a time very long.

  Next time, if this never happens again, you can try a Reset of the printer:

  Here are two types of reset the base printer:

  (1) if there is a keyboard, turn it off, then on and press on # and 6 (press and hold while turning on the printer).

  (2) without a keyboard?  So unplug that LEAVE unplugged for 30 seconds to a minute.  Reconnect it.  (Be careful with this one - will not shock).

  It can become a little more complicated than that, but a basic reset sometimes "will have the printer attention" if it's just "spinning" and nothing else will not physically.

  I'm glad it works again.

  Maybe printers receive loners.   The smile.

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Why the printer stop printing when you click Cancel?

  This may belong in the Technet forum, but this is a question that concerns me since the days of Windows 95.

  Sometimes striking impression make you you screwed up in a certain way and to cancel the print job. Enter the printer, right click on the document and hit Cancel usually takes some time, during which the printer keeps printing and waste of ink & paper.
  Why is this? Why doesn't it stop immediately? Why do several PAGES for it to stop? Come to think of it, I can't think of a time casual since I left high school (which uses Mac and Apple printers) when I have not tried to stop a print job to a printer that was not Hewlett-Packard (an HP printer from ""), so I'm not sure if it is exclusive to HP or not. Work used to stop printing almost immediately after order - Macintosh printing, or at least they did with printers ImageWriter and LaswerWriter Mac OS 6.0.8 - 9.1.
  This is not the case with Windows 95 - Windows 7.

  I used to assume it had something to do with the buffer memory of the printer, but a recent incident involving someone accidentally unplugging the computer when the printer was on changed this long assumption based on my experience when I bought a buffer for my printer ImageWriter II return to 1989 or 1990. Printing stopped almost immediately after the computer that it was connected to the lost power (he tried to disconnect a faulty device so that it could be shipped to the manufacturer and pulled the wrong plug).

  This phenomenon embarrassing occurs on several different computers, printers and configurations. School computer laboratories on the areas of small business workgroups to systems of the House with the directly connected printer.

  Hi, SlickRCBD,

  The memory has a lot to do with why this does not block when cancelled.  There may be an older doc who is was filed here.  Unplug the printer from the computer periodically.  Leave that he unplugged for several minutes (5 max), then reconnect.  Remove the cables that connect to the back of the printer for the same amount of time.  This clears the memory.

  Open elevated command prompt

  Enter Net Stop Spooler

  Wait message spooler stopped

  Go to your windows\system32\spool\PRINTERS\ folder

  Search for files ending with. SPL and. SHD created around the time that you were trying to print - delete these files.

  Return to the command prompt window

  Type Net Start Spooler

  You will see message spooler has begun

  Output

  Sometimes the files are hungup.  The above gets rid of them.

• HP Envy 5530: Printing stops halfway through on the impressions of page multiple.

  We have two machines Windows 8.1 print wirelessly to a printer Envy 5530 and if we try to print a document of several pages, many applications, the printer stops printing half way a page, not the first, eject this page and does no more than the print job print, but will continue the work next in the queue. I made sure we use the latest version of the HP software and Windows is up to the updates.

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Envy 5530 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Printer stopped working. Pop - up says that a printer connector has stopped.

  Printer stopped printing. When printing has tried, it displays popup indicating that "the printer connection has stopped."

  Hi Ron BakerSA,

  1. What is the serial number and model of the printer?

  2. using a local or network printer?

  3. This occurs when you try to print from a specific application?

  4. What is the full error message you get?

  5. were you able to print before without any problem?

  6. you will remember to make changes to the computer before this problem?

  Try running the Fixit for the printer and check.

  Check out the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• Estation c510 printer stopped working

  My HP Photosmart eStation c510 stopped working 2 days ago.  I have Windows 7 ultimate 64 - bit operating sys.  I did everything I could to isolate the problem, but no solution has fixed the problem.  My computer sends the print job to the printer, but I get the error message: printer has failed and alignment failed.  I rebooted the printer set to nothing or bells, I tried to copy null, scan-nothing and all the software is up-to-date.  I printed a few color photos and black and white, the other day with all the problems.  I hope a solution, it's out there, I like the printer and features, but...

  Thanks for any help!  Scrapman

  Sorry you had a problem with the printer does not print.

  If you encounter a failure "alignment", then it is a hardware problem with the printer itself.

  Try out the printhead and manually clean the bottom water and lint. Lift the latch to the right of the cartridges in and out of the area of the basket. This is the print head.

  You can also clean the cartridges or replace. It is a problem of ink system. Try the link below and see if that will help.

  http://support.HP.com/us-en/document/c03081973

  After completing these steps and see if you can perform an automatic test or report to printer from the printer itself.

• Printer stopped printing all of a sudden

  Hello

  IAM using Ricoh Aficio MP2000 PLC6. The printer has served me well, but suddenly he stopped at print.when I can't shoot windows do not see it in the network. Kindly help.

  Original title: PRINTER PROBLEM

  Hello

  Before you begin to solve the problem, we need more information to help you better.

  1. What is the version of the Windows operating system do you use?

  2. Since when are you facing this problem?

  3. Are you facing this problem to print a particular document?

  4. What happens when you try to print?

  I suggest refer you the below article on the difficulty of the problems of printer and check if this is useful:

  https://support.Microsoft.com/en-us/instantanswers/bdff0c68-6204-6025-DCC1-3aefaa14ab40/fix-printer-problems

  To help us with the information to you more.

  Thank you.

• Printer stopped working.

  Original title: printer

  Printer a HP 1810 was installed as default printer for several years, this am it has stopped working.   Control Panel showed the spooler problem, troubleshooting Microsoft said spooler has been set.  BUT, can not get the printer with photo to be recognized or set as default.  Should be a simple solution, and I do not know.  HELP, please.

  Hi Donald,.

  -What operating system is installed on the computer?

  If you have installed Windows 7, then you can view this tutorial because it is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  We can refer to this article and check if that helps.

  Installation of HP printer: http://www8.hp.com/us/en/support-topics/printerinstallation.html

  Thank you.

• Lexmark 5200 series printer printing stopped

  My Lexmark all in one scanner printer etc has stopped printing it crosses the movements but not of any color of ink appear on the 'impressions' page, even if the other black was still ink but that did not work, I put a new black cartridge in the machine to know once again it appeared to print the alignment page but again not ink - then he said that maybe the film had been left on the cartridge - have you checked the two - there no - I came back just to hospital and of the need to print some important documents - help please - someone suggested I find instructions for the machine to clean the ink nozzles but went on the default printer and device (Lexmark) and cannot find one command option to clean the ink nozzles - what? - and if so where is that order please?  Thank you Carole x

  Hello

  As Lexmark OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Lexmark support, online documentation, and
  drivers.

  You may need to update or reinstall the latest driver.

  Lexmark - Support
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  Lexmark - drivers
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  =============================================

  The main problem is perhaps the drivers but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• print the model 4630 printer stops after printing some of the jobs

  I have a printer HP 4630 and not ok to print jobs print 1 or 2, but will not display a larger print job with stop. Help

  Hello @art212,

  Welcome to the HP Forums!

  I understand when you print a document of several pages, it stops printing after the second page using the Officejet 4630. I will do my best to help you! I need to ask you some questions to clarify this issue:

  What is your operating system on your computer? Windows or Mac?
  How is the printer connected? USB or wireless?

  Please verify this information and I will help you. Have a good night!

• update caused my printer stop printing

  my hp laserjet 3055 stopped printing when my computer took upon itself to upgrade in the Middle I'm working on some documents.  Upgrade shuts down my computer for over a half hour and then stop again more install updates.  When I got to use my printer it had added a few peripheral onenote online printing, I don't have anything on the use of these devices.  My printer was missing at this stage of my hard drive of the computer.  After going to the outside and the back, I connected to my computer to see the printer icon was back so with a sigh of relief, I tried to print and it says: error.  I don't know what to do.  I have a perfectly good printer that was installed by a friend, it took forever but it worked and now it works work, my friend went abroad and I want to cry.  Please can someone explain how I can get it working again.  A desperate novice.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)