Help driver HP Officejet 4355

Similar Questions

• HP Officejet 4355 printer suddenly start very slow printing! HP technician advice needed!

  Hello
  My all-in-one HP Officejet 4355 printer start suddenly feel very very slow! I've had it for 4 years, and God never gave me any problems (maybe minor once, but never really made me mad), as I used it very often at home and at the office. I always buy the HP original ink cartridge (only once, when I wanted to see how works the charging - it's not) and now the last cartridge has been in the printer for a month or two, nothing unusual, and suddenly my printer starts to print very very slow, if normally it took 10-15 sec for a black and white page now it will take 10 to 15 minutes. Could someone suggest help?
  Please don't talk about the computer/Windows/USB settings, they all work very well. I unplugged the printer from the PC and don't "align the print cartridge. First step, the printed area, took 10 minutes, second step, part of scanning, does not pass. It says printer cannot allocate the alignment page...
  Moreover, I did look around for answers and found that some people say it's a fault of the ink cartridge. But I used this cartridge for a few months now, it's almost, but not yet finished, it was perfectly up to printing. Impressions during this issue come out OK, 7 out of 10.
  Anyone have any ideas? If I could attract professional assistance of technicians of HP, it would be perfect.
  
  Thank you.

  © RedStarLimitless ©

  Although they still ink cartridge may fail and give the results you see, where the printer made a bandage and wait 10-15 seconds for the next Strip. This is caused by the failure of one of your cartridges.  Remove each cartridge and clean the contacts on the cartridge and printer can solve the problem.

  I don't remember if the Officejet 4355 reserve mode supports, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• All-in-one HP Officejet 4355 any ink not levels using Windows 7 (64-bit)

  I have a HP Officejet 4355 all-in-one printer and have recently changed my OS to Windows 7 (64-bit), and there is no available ink level.

  Help, please!

  Thanks in advance

  Concerning

  AggyTheSlyFox

  Hello

  The application of the HP Toolbox is no longer available for Widnows 7 for your printer, just a basic print and scan drivers set is available as you can find below:

  http://support.HP.com/us-en/document/c02663591

  You can print a self-test to find ink levels estimated on some levels, or to ensure print quality is good for some older models.

  Print a self-test of the all-in-one page to verify that the all-in-one works properly. If a test page does not print, contact HP for assistance. To print a self-test page, follow the steps below:

• Fax reception and print to another printer HP OfficeJet 4355

  Hello

  I have the all-in-one printer HP OfficeJet 4355 on Windows 7 Home Basic 32 bit.

  I can receive faxes and send it to the PC without printing on HP OfficeJet 4355 peripheral? Also, I have another printer connected to the PC, and I want to print it directly from Fax.

  Is it possible to put in place which?

  Thank you

  Vladimir

  Sorry, but with this particular printer, you will not be able to receive faxes via your PC. Need the drivers and software FULL of FEATURES, and this printer does not have this driver available.

  Other printers have this feature and you can configure it as you wish. This printer has not.

• All-in-one HP Officejet 4355: cannot install HP Center Solution for my Win7 (64 bit) portable

  Dear Sirs,

  When I go to the drivers section for my printer model, I don't see any possibility to download the full version of the drivers. I don't download that one option for updating Vista to Windows 7 or something like that.

  Please can you give me a link to download the driver package complete (including the HP Solution Center) for this model.

  THX

  René Poirier

  Hello

  I'm afraid that features complete functionlaity is no longer available on Windows 7, only a basic set of drivers is available as you can find the list on the following link:

  http://support.HP.com/us-en/product/HP-OfficeJet-4355-all-in-one-printer/1138399/model/1138400/document/c02662914

  Shlomi

• hp officejet 4355 printer problem

  Hello. I have a printer hp officejet 4355. I don't have the manual and I have a problem with the cartridge. When I plug it, it says there is a cartridge error and advises me to check the user's manual. but as I said, I don't have it. What should I do? Meanwhile, I don't know if there is enough ink in the cartridges. Thanks for help.

  Hi Kayyan,

  I suggest you to consult the steps mentioned in the article of the assistance provided in the forums of HP.

  HP officejet 4355 all in one. Cartridge error, refer to device documentation to troubleshoot.

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-OfficeJet-4355-all-in-one-cartridge-error-refer-to-device/TD-p/2157661

  Alternatively, you can refer to this article for more information.

  Mistakes print cartridge

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpa00299&tmp_task=solveCategory&cc=us&DLC=en&JumpID=reg_R1002_USEN&LC=en&product=351109

  You can also download the guide to use this article.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=1138373

  If you have any other questions about the issue, you can view the query in the HP support forums.

  http://h30434.www3.HP.com/T5/other-printing-questions/BD-p/printing

  Hope this information helps. Response with status so that we can help you.

• HP Officejet 4355 all-in-one: scanning problems

  The Scan option does not appear on my computer despite having installed the all-in-one HP Officejet 4355 printer. I also tried to download the latest drivers for the printer but the Scanner does not work. Yet on other laptops (I have a Gateway laptop), there is no problem, the analysis option is available.

  Is there a compatibility issue when using the printer on Vista?

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• Cannot change attributes read-only files, by updating the drivers help Driver Whiz from HP.

  Original title: change file attributes

  I'm updating some drivers help Driver Whiz from HP.  The new drivers download but will not be installed.  Apparently, I need to remove the read-only file attributes, but no matter what I do it continues to change the next time I have access to the file to read-only.  Any ideas?

  Hi keuller,

  You can read the following article and check if it helps:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

• URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro

  Dear helpdesk,

  URGENT! need help DRIVER HP Pavilion P6230L for Windows XP Pro...

  Send me the link for the driver or compatible.

  or email to: [email removed for privacy]

  Kind regards

  MRZ

  Message edited by SandyD on 25/11/2009 14:01

  Thank you

  but I can't download link for LAN

  FTP://ftp.HP.com/pub/softlib/software10/COL30407/PV-75371-1/sp44423.exe is not available.

  and I need driver motherboard chipset

  Help me.

  MRZ

• OfficeJet 7110 all-in-one, help driver?

  I just turn off the phone w / HP & they won't help me, but they did it in February for exactly the same problem. Have new Acer tour, downloaded what was on the HP site & it printed test page & analysis fine but don't print computer. When you use the charm it says I need an application. When I shift/cntrol/p nothing happens.

  Can someone help me please?

  Welcome to the connieavaughn forums,

  I noticed your post on the issues you are experiencing printing from your PC. I understand that you are able to scan and print a test page with success. This shows us that the features of the printer are very good. It seems that you were running Windows 8 or 8.1, if this is not correct, please let me know.

  Please run the HP print and Scan first doctor , and if the tool does not help the issue, please respond to me with some more information.

  1. print from Notepad and let me know if that is successful or not.

  2. If you find that you cannot print a specific program or web browser (IE, Firefox, Chrome), please try to print from another web browser and also let me know what browser seems to have the problem.

  3. get the results of execution of printing and scanning Dr.

  Thank you, enjoy your Monday

• driver HP officejet j4580 problems

  Hi, I have a hp pavillion model p7-1110 with windows 7 Home premium 64-bit system. I have a hp officejet j4580 connected to it. the system has always worked well. all of a sudden the printer does not print. it justs ejects the book, he says out of paper, then crashes. I downloaded the drivers back to the hp site and installed. It always does the same thing. Then, I downloaded the installer printer hp for wondows 7. When I run the wizard, it recognizes my printer and says "current full CV software is already installed for the selected printer, but the basic functionality pilots seem to be missing or configured incorrectly. Click next for assistance. "when I do that the wizard says"your printer drivers are disabled. Click next to enable them. "after that it said"device discovery ". I see a green bar moving, and then it kicks me right back to where it says «the current full CV software is already installed...» "and I get nowhere. I am looking for any help. Thanks in advance

  Hi Iceman7475,

  Thanks for posting. I'm sorry for your trouble. Of after what you have submitted, I am fairly certain that the next HP tool should be able to help HERE. Click Download and SAVE the file. Your installation of the driver is corrupted. This tool can help fix.

  After it is downloaded, open it and follow the instructions to extract the files. When the files are extracted, a window entitled "OJJ4500_Scrubber_13". Click the yellow folder.  Scrolllll down, search by alphabetical order "Uninstall_L3" and click it. If you are connected by USB, you may be asked to remove the cable, do so and follow the prompts. The additional uninstall program can take several minutes to completely remove the installation that is damaged, please be patient.  When you are prompted, save your work and restart the computer.

  Once you're back in windows, re - install the printer and connect the USB cable ONLY when prompted. If all goes as described, you should be set. Please let me know the results.

  TechVetSeven,

• HP OfficeJet 4650: Problems installing driver HP OfficeJet 4650

  I can not scan with my printer. I tried to install the driver HP several times. Each time it is said that it has installed successfully.

  When I add the printer to the list on printing & scanning in system preferences, it finds the printer (because it is attached to my computer via a USB cable) but in the ' using Print:' section, automatically selects the generic printer PCL. HP OfficeJet 4650 isn't in the drop-down menu to select in this section. This means that there is a problem with the driver installation?

  I tried to uninstall the software, but I can't uninstall it, suggesting that it has not been correctly installed in the first place.

  What can I do?

  Hey @HPURCELL,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your machine of Mac OS x 10.7 printing to your 4650 e-all-in-one printer Officejet. What is happening is that the printer drivers have been installed for Mac OS x 10.8 or later. The installation program is running, but the Mac printer does not communicate. To scan, you will need to upgrade to Mac OS x 10.8 or later version.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Cannot print from broadcast with driver Hp Officejet 4500 wireless

  Original title problems: Hp Officejet

  My Hp Officejet 4500 wireles doen't print from another computer. I ran the diagnostic of the printer and am told that my computer doesn't have the right driver

  for my HP Officejet 4500 wireless.

  Hello

  1. what operating system is installed on the computer?

  You can download the drivers for the printer based on your operating system from the link provided below.

  Software & Driver Downloads HP Officejet 4500 all-in-One printer - G510a

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

  For more information about troubleshooting steps, see:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• All-in-one Officejet Pro L7780: driver HP Officejet Pro L7780 will not install with Windows 10

  Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.

  I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.

  I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.

  Thank you.

  Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having errors in the print driver. I would like to help!

  I recommend to remove the cartridges ink and starting by a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend running the HP Print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.

  Thanks for posting on the HP Forums!

• Driver HP Officejet 4500 G510 for Windows 8

  HP has a new driver for the OfficeJet 4500 G510n wireless printer to use with the Windows 8 operating system upgrade?

  Here is the link for the driver and software, you will need. I hope this helps.

  http://goo.GL/ph9aT