Help! Dropout regular while importing video HDV on first Pro CS5.

Similar Questions

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• Video card for first Pro CS5

  I'm currently has the NVIDIA GeForce GTX 285, Win7, 6 GB RAM and periodically get the crash program and the following error when you work with projects: driver problem detected OpenGL NVIDIA with the display driver.

  I want to upgrade to a better video card and would like a professional recommendation. I want to stay in the range of $400-$500. Most of the recommendations that I looked on the forum seem obsolete compared to products currently listed on the NVIDIA site. Thank you.

  What Bill meant that with only 6 GB of RAM (which is IMHO not enough RAM to run Premiere Pro CS5 + to the satisfaction of most of the people), the high-end cards would have been a total waste of money: performance of the RAM and the large pagefile expansion will severely limit any provision of performance for the high-end cards to the point where these cards would not be a faster than cards much cheaper. In other words, there is a mounting system as fast as its weakest link (in this case, the low amount of RAM and the generally slow hard disks that are used to Exchange files). Increase in the total amount of RAM 12 GB (or better yet, 24GO) would significantly reduce the need for such a huge, slow the pagefile access. Even the fastest SSD can't stay with the RAM in terms of throughput and latency for access.

  And which causes this slow performance of your system is Windows increases generally the file exchange - and with only 6 GB of RAM and a relatively heavy such as Premiere Pro resources application, it would requre a rather huge swap file. By default, Windows sets the size of the initial pagefile roughly equal to the amount of RAM installed. What is happening here is that the difference between the amount of installed RAM, used by the first and the amount of space for swap file that requires the app is so great that it would have potentially forced the size of pagefile to mushroom in many more than 10 GB. This considerably reduces the performance of the total system, performance not only in first. Even if the size of the pagefile in Windows for an amount well above the RAM installed will not completely solve the problem of slow because no disc is nowhere nearly as fast as RAM. But if you do not use a swap file, especially with a low amount of RAM installed, the system will crash during a session of editing/rendering/encoding with "out of memory" errors.

• No video playback in first Pro CS5.5

  Video playback is completely insensitive. show the program monitor through all that is at the origin of the program (for example-, the office or anything that is open). I have a GTX560 Ti graphics card and I've already activated as a CUDA taken in charge for the "Mercury Playback Engine acceleration GPU". I am new to use the forums for help with these issues. Help, please.

  Wow, I've spent a lot of time to go through all these links recommended. I did everything you said and I finally figured it right before I was about to send you a HUGE response. I just need to adjust video Image settings under the control panel of Nvidea NVidea settings rather than the video player settings. A really easy solution. I am happy that it was not something big. Thanks anyway, sorry if I've wasted your time. I learned a lot, however, and not only to set up a post for my problem clear.

• Best way to import iPhone 4 video in first Pro CS5 - settings for the import of new "preset sequence?

  Shooting video with my iPhone 4 (ATT version) and try to import the file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.

  The problem is that I am just guessing on how to import sequences, and the result is I'm getting artifacts of movement and generally lower quality.  I use iMovie 11 my basis for comparison.   Not surprisingly, iMovie 11 imports since iPhone beautifully, but when I looked around, inside the properties, there is not much to see.

  Go using Apple built in quicktime 'Inspector', it is possible to see this video of iPhone4 a result of properties:

  file ".mov".

  Dimensions: 1280 x 720

  codecs: H.264, AAC

  Color profile: HD (1-1-1)

  Audio channels: 1

  Total bit rate: 10 543

  AGENCY - PREDEFINED DESCRIPTION:

  < my comments sharp brackets >

  ????  = Question

  General

  Editing mode: DSLR < Correct?   Best I could do, perhaps it should be "Mobile Device" maybe it's okay >

  Time Base: 29.97 FPS

  Video settings

  Image size: 1280 h 720v (1.0000) < of "Inspector" apple quicktime window >

  Frame rate: 29.97 FPS < of "Inspector" apple quicktime window >

  Format of the pixels:?

  Fields: N?

  Audio settings

  Sampling frequency:?

  Default sequence

  Total of the video tracks: 3

  Master the track type: stereo

  Mono tracks: 0

  Stereo tracks: 3

  5.1 titles: 0

  SUBMIX mono tracks: 0

  SUBMIX stereo tracks: 0

  5.1 submix tracks: 0

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.  (I'm not worried about the export for iPhone screen, concerning most of the information that I can find).

  Thanks in advance, Michael

  Tips for the smooth search and * lossless * import/ingest footage in PPro CS5 iphone4.

  You import it. that's all. First will (or should) use the file in native mode, so no need to do anything out of the ordinary.

  To create a sequence for it, simply one of the clips slide the button new item at the bottom of the project Panel. a new sequence will be created that matches the sequence. Edit now...

• Import MXF on first Pro Cs5 (Panasonic P2) batch?

  Hello

  Does anyone know how to import several both mxf files without having to import the folder contents as separate files? To be clear. I know that several ways to import the mxf in first files. The first is to simply click on file > import, and then browse to the file. Another way via the media browser and yet another is to click with the right button on the project Panel and selecting import. They all share the same problem. You can only import one file at a time because you must select the mxf file in the video subfolder. First then composites the audio and video together. If you select instead the 00 files # you can select more than one, but you get lots of separate audio and video files for each clip. (You also get a composite file but the additional files are a nightmare when it comes to the Organization).  The file looks like when you navigate using the Flie > import or right-click > import methods:

  

  The media browser option is slightly different in the time you navigate to the folder 00 # you see the composite file instead of the content folder. But still you cannot select multiple files at the same time unless you navigate only in the parent 00 # s folder so you can select all folders 00 # but you get the same messy jumble of files you get trying this the other way. You can just drag them to the project or Panel right click > import to import the files. This is what it looks like:

  

  The problem is that it is what the file looks like when you import the file:

  

  The only necessary file in this folder all is the last. Then someone does know how to import several mxf files in an era that produced only a single file by sequence in first pro CS5?

  Yes, P2CMS is kind of stupid that way - it is really built for a FCP workflow, where you can not handle the MXF files natively. I'm not using P2CMS (or at least I have not for a while), but see if you can turn off the ability to split clips in folders like this.

  The mode of operation of the P2, is that a CONTENT folder is created, with AUDIO, VIDEO, CLIP, ICON, VOICE and PROXY files it contains. Each folder contains the part of the MXF clip that corresponds to the type of folder (ie. video goes into the VIDEO folder and so on). When you ingest with P2CMS, it grabs all the components of a specific clip and throws them in a folder named for the clip. The idea is that it facilitates asset management, because you can only select folders (clips) you want, and you will get all the files you need. I personally think it's a lousy way to do it, but it's me.

  If P2CMS won't let you copy a P2 card with the intact original folders, you can probably just use Finder to copy the CONTENTS of the folder and its, well well, the content on your local drive. So, when you look at the map "P2" of the media browser, you will see all the clips that are there.

• Import .srt file in first pro cc and CS6

  I'm trying to import file srt in first pro cc and CS6. Its not appearing is not in my preview window. I can see the file captioned on my calendar above my video clip, but the captions are not appearing on the preview window.

  Post edited by: Kevin Monahan

  In the latest version of the CC of the BODY, to import a. SRT will be the file be interpreted as a 708 1 file captioning service. If the value your monitors (via icon wench) CEA - 708, Service 1.

  Body CS 6.0 does not support SRT files.

• Import old project in first Pro CC

  I have an old project that, at the time when the computer was not able to handle HD files. So I converted the widescreen HD1920 x 1080 to 720 x 480. Today, I would like to import this project in first Pro CC using the HD original files.

  Import alright and I unchecked file extensions match so I could tell him where to find the HD files. But the time line still think that these files are Standard video .avi rather than new HD files. So, I see only a part of the video. Even if I export to Media Encoder Source said 720 x 480.

  My question is how can I tell the sequence that files on the timeline are now HD 1920 x 1080 and treat them properly?

  Hi Michelle,

  Go to the settings of sequence/sequence and stand mode editing custom first, then size of video image 1920 x 1080, which was the size of the original frame of your HD files.

  It will change the size of your sequence, you can also adjust the size of the pixels just below the frame size of video to adjust the proportions of the clips to fit into a base.

  

  Kind regards

  Navdeep Pandey

• less video transition on first pro cc than first cs6

  Hello

  I noticed that there is less video transition on first pro as first cs6 cc...

  What is the reason? is it possible to import the video transition to cc pro?

  Thank you very much

  Ofer

  That's right, that some have been removed from the program.

  and don't you cannot use import from other versions.

  What transtition miss you in your workflow?

• Importing fonts in first Pro CS5 titration?

  I have a particular font (Old English MT) I would like to use to create a title in first Pro CS5. I can't find a way to import the data in the program. Can anyone help please? A search found empty.

  Thank you

  Trevor

  You do not install the fonts in the first, you install in windows.

  Right-click on the police and 'install '.

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• using first pro cs5.5, when I opened the project opens as first cloud creative pro and asks me to renew my subscription which was canceled less than a year ago help needed please keith

  Why my project first pro cs5.5 opened as creative cloud when I do subscribe to creative cloud keith

  Thank you for your help no I don't have any apps cc on the computer, but what I did to restore to a previous date pre windows 10 and that seems to have solved the problem many thanks again keith

• Hello, I need to know how to buy video editor adobe first pro? should which card I use? Live ARGENTINA and VISA rejects me. Please answer, thank you!

  Hello, I need to know how to buy video editor adobe first pro? should which card I use? Live ARGENTINA and VISA rejects me. Please answer, thank you!

  The country store & the Adobe ID, payment details must be same.

  If your Adobe ID is associated with the wrong country, please see this link:

  Change the country associated with your Adobe ID

  You can see the locations that creative cloud is available here:

  http://www.Adobe.com/content/dam/Adobe/en/products/creativecloud/CC/PDFs/CC-availability-m atrix.pdf

• Preview the video in Adobe first Pro CC stutters badly all playing on a portable powerful

  I bought 4 months ago relatively powerful computer laptop specially for my needs of video editing with first Pro CC, but so far it has been very frustrating experience.

  Lenovo Y40-80

  Intel i7-5500U

  16 GB OF RAM

  SSD 512 GB

  AMD Radeon R9 M275 4 GB

  Screen LCD 1920 x 1080

  Play timeline (4K clips without any effect applied) in the window saccade preview so bad that it is almost impossible to use the software. Reading is relatively smooth 3-5 seconds and after that it significantly slows down to 2-3 frames per second (the other images are deleted).

  I tried all the latest AMD Catalyst, including the version beta drivers. Complained about the AMD forum. Reduces the resolution of reading from 1/2 to 1/8 with no visible effect. In fact even the discreet GPU through the BIOS turn off have not declined over the playback speed. Passage of the first CC (2014) to CC (2015) doesn't change anything either.

  Interestingly enough, feature as 4K quality export works well enough, with a speed comparable to my office for 4 years. The office manages very well the process of edition, and based on the specifications of the laptop must have about the same performance as the office.

  Suggestions, please?

  your cpu is one of the scam i7 from intel. It is a core 2 and not 4 core performance is cut in half compared to the 4 core i7 about the same price. for comparison, your cpu is the same speed as an office i3 cpu. You can try to sell the lenovo and get an i7 core 4 with a gtx 970 m or 980 m.

• First Pro CS5.5 crashes during video playback

  IT's REALL Y F * KING BORING. First Pro CS5.5 crashes when I press space (or by clicking on the Play button), it is impossible to change. Here are my PC specs.

  OS: Windows 7 Professional x 64

  CPU: AMD FX 6300

  RAM: 8 GB

  GPU: AMD Radeon 6570 2 GB

  QuickTime version 7.7.3

  All of my graphics drivers are up to date.

  Please help. I can't change it now.

  Oh and by the way, this is not happened with Premiere Pro CS6.

  What about the rest of the information requested in the Information http://forums.adobe.com/message/4200840 FAQ