First Pro CS5.5 crashes during video playback

Similar Questions

• Media Center crashes during video playback of need to hard reboot.

  Hi, any help would be greatly appreciated as this has been driving me crazy for several days of attempted troubleshooting, Googling, try many things to fix it... first of all let me apologize in advance for the length of my post but I wanted to give as much information as possible to help anyone trying to rule out things...!

  OK, so the problem...

  I installed Windows 7 Ultimate 32 bit as a clean install on my HTPC, after the first do a complete 1 & 0 format of the hard drive that had previously installed Vista Home Premium, installation went well and I proceeded to install all updates to Windows, and then update drivers for all my hardware.

  The system is used only as a HTPC, it's my only TV and video playback device, (so reliability is essential for me) and it is connected to a defintion of Sony, 44 "Widescreen Rear Projection TV Standard, via S-video, with audio goes to a system DD/DTS 5.1 Surround Sound Speaker Logitech z5500, via a sound card by using the optical cable (specifications of the complete system below).  The system worked flawlessly more of one year using Vista SP1 32 - bit, until I upgraded to Windows 7 Ultimate on the hardware configuration identical.

  Since installing Windows 7, it worked fine for the first week, not a single problem, I am housebound are disabled so that the system is in continuous service 24/7 and he had no problems in the first 10 days, however all of a sudden I'm getting now random freezes requiring a hard reset , but it occurs during video playback of any of my 3 hard disks, or when you try to play a DVD in Media Center. Which led me to think it is associated video (problem of driver or hardware fault) card, disc or HARD associated.

  Frost can occur sometimes, after a few minutes of reading, or sometimes after a few hours, requiring a restart of the hard to get the sytem to answer.

  Reading of the TV via the TV Tuner card is not affected, its only when playing of stored content (MPEG2, h264 .mkv .avi files or DVD) are all media SD HD and all played fine for the first few days.

  Intermittent freezes occurring could block the system completely freeze the image and audio and all activities, nothing would work at all, I tried windwos keyboard, ctrl alt del, nothing at all, to do a reboot hard to recover the system, it can then be either minutes or sometimes an hour before the same thing happens again. I tried to use different video files in the case of the corruption of files, different DVD to exclude damaged disks, same result.

  System includes:

  1. Map - mother ASUS M3A32 - MVP Dlx, Socket AM2 +, 790FX/SB600 chipset, BIOS v.2003
  2. Operating system - Windows 7 complete edition 32-bit Retail (clean install, all the Windows installed updates)
  3. CPU : AMD Phenom 9950 Quad Core @ 2.6 Ghz (stock)
  4. RAM - 4 GB Patriot Extreme Performance DDR2-800 5-5-5-15 2T
  5. Graphics card - ASUS Nvidia 8800GTS @ settings inventory 320Mo
  6. Sound card - card of ASUS Xonar D2X PCI-E
  7. Card TV Tuner - Hauppauge PCI-E WIN - TV Nova S more DVB - S directly connected to the flat outer of satellite, with remote control IR IRBlaster
  8. Player - optics Sony/NEC Optiarc DVD - RW Labelflash
  9. HARD drive 1 - (Startup disk) Samsung Spinpoint 160 GB SATA II
  10. HARD drive 2 - (Only for TV recordings) Hitachi 160 GB SATA II
  11. HARD drive 3 - (Storage media) Maxtor 1 TB SATA II
  12. Netwrok adapter- EDIMAX PCI 54 g Wireless Adapter - uses a RALINK driver
  13. Keyboard1 - Logitech Dinovo Mini Bluetooth wireless keyboard
  14. Keyboard & mouse 2 - Logitech MX3200 wireless mouse/keyboard combo
  15. Speakers - Logitech Z5500 5.1 Digital Surround Sound via Toslink optical cable connected to the ASUS Xonar Sound Card S/PDIF optical

  All the material above has had pilots upated since the sites of respective manufacturers, including BIOS of motherboard, chipset, graphics card, network card, sound card, card TV, keyboard (Logitech Setpoint) etc... etc...

  Initial added after Clean install software:

  1. Internet Security - Comodo Firewall v.3.13.126709.581 (updated daily since installed)
  2. Antivirus - Alwil Avast Professional 4.8 v (update daily & daily analysis of all local drives)
  3. Browsers: Firefox v. 3.5, Google Chrome
  4. MCEBuddy v.1.1 - for automated video Conversion of MCE .wtv smaller file size .avi TV recordings

  All of the above software has been installed by using the latest available versions downloaded from the manufactuer sites, which claim to support Windows 7 and all have been updated regularly since its installation.

  I have tried many of the suggestions I've seen posted to try to solve this problem, including:

  1. Uninstalling and reinstalling Media Center and WMP
  2. Disabling subtitles in Media Center
  3. Disable unused mobo onboard devices in the BIOS
  4. Update BIOS
  5. Updated all drivers
  6. Disabling Control Panel Nvidia PhysX
  7. Disabling the Enhanced Sound features for reading devices
  8. Run CCRegistry cleaner
  9. Run many Virus scans nomral mode and safe - no problems found
  10. Don't run the Checkdisk on all HARD drives - no problems found
  11. Run the SeaTools Diagnostic tools for HARD drives - all disks HARD discover OK
  12. Tried playing files AVI of HDD separated to avoid a HARD drive problem - same problem occurs on all readers
  13. I tried change graphics card for an ATI HD4850 with the latest ATI drivers - same problem.
  14. Tried to change the audio output S/PDIF instead of Xonar Soundcard onboard - same problem occurs
  15. Tried the Windows 7 repair facility - problem persists.
  16. Tried to uninstall all updates of Windows -same problem
  17. I tried the system restore to before the occurrence of the problem started - no help
  18. tried to re-downlaoding all hardware drivers updated and re - install in the case of a corrupt driver download - no chance even problem

  Essentially none of the abvoe helped to solve this problem, and it becomes really frustrating to have to restart the PC again and again trying to watch a recorded video file or DVD.

  After remove all the above I can only assume that it is a problem with Windows 7, needing a fix of the millisecond.  At least I think that I've exhausted everything I can try... ???

  With what is my HTPC, if I can't perform reliably, I have to reinstall Vista, Vista was not the best OS, but at least it was reliable for me in terms of my HTPC.

  I was really eager to get Windows 7, I used the RTM version on my netbook for some time before I made the decision to purchase the full retail version for my HTPC, and never had any of these problems with my installation of netbook that I used for playback of media files from an external USB HDD.  So I'm really disappointed to have these problems after doing all that I could to make sure that Windows 7 would work OK.

  If anyone can give me any suggestions of what I can try, anythign I can too watching, or if someone has hada similar problem and found a solution for him... Please, please, post more details, because I am really at my wits end now and have to resort to watch the recordings on a 10.2 "screen of my netbook with some speakers of the small laptop usb, after spending so much money on my system and surround sound Setup HTPC, its devastating to think that I'll have to go back to Vista...

  Absoultely ANY suggestions would be appreciated...

  Thanks in advance for any help and once again, I'm sorry for the length of the post, if there is more information needed I've not provided above, please let me know and I will try to publish as soon as POSSIBLE...

  After the forum of scouring and reding of countless discussions, it seems, there is some sort of problem with Media Network Sharing tha could be the cause of this problem, as many people have reported that disabling wmpnetwk.exe in the Services.msc solves the problem.

  It's not an ideal solution for me, as I have a HTPC in the room that I play media from the main HTPC downstairs and all the hype MS seemed to suggest that Win 7 is it is much easier to achieve, and has been one of the main points of sale used in one of their commercials for the operating system.

  This my MS you need to pay attention to this problem and work towards a solution and allow users to know when the solution has been provided, probably have a service that must be disabled to let the operating system work reliably is quite counterproductive.

  Nobody seems to answer my post above with other suggestions and wmpnetwork.exe disable workaround was published last November, all the while still there is no permanent solution...?

  EDIT: Just to confirm this wmnetwork.exe Netwrok disabling media sharing in the services, as well as disabling the media streaming in the Netwrok Sharing Center > advanced sharing Options, solved the constant crashes for me.

  So all the MS speak of 3rd party drivers for the cards video and other material or material defects are to blame, it's total BS, the only problem is to do with Windows and Windows Media Sharing, lets hope, they decide to do something to fight it... !!

• First Pro CC (2014) crashing during a sequence

  I just did a clean install of OS X Yosemite and installed Creative cloud on my MacPro 2008. Whenever I make a new sequence or open a saved draft of Premiere Pro CS6, first Pro CC 2014 still crashes. I don't know what is happening because before I upgraded to OS X from Mavricks, I used Premiere Pro CS6 without any problem at all. Help, please! Thank you!

  Here are my MacPro settings:

  

  Here are the errors I get:

  

  That empty space is usually said this:

  

  OK I seemed to "solve" the problem. I have two video cards on my MacPro:

  

  I have a monitor Setup three with two monitors on the 2600 XT and a single on the 6870. I disconnected the two monitors on the 2600 XT and created a new sequence and it does not crash. Not quite sure what's happening with this because this has never been a problem while I was running Adobe Premiere Pro CS6. I still don't want to run an installation monitor three but the 6870 does not support three monitors. If all goes well, there is an Adobe update that will correct this problem.

  Is it possible that first will not try to use the other video card?

• Occasional Satellite Pro P300-1FP - gel during video playback

  Hello forum,.

  I have a laptop Toshiba Satellite Pro P300-1FP, age about 4 years old.

  Running Windows 7 (32-bit version).

  An occasional but annoying problem: when playing video, from time to time the whole system freezes. Sound continues to come from the speakers, but it is usually either an idle down & distorted version of what I should be heard, or a noise buzzing/scream loud, repetitive.

  System retrieves ever - only freezes completely, unresponsive, frozen display, the mouse pointer moves, etc.. Have to restart every time.

  Anyone know what could be the cause of this & how can I fix this?

  Thank you
  Alan.

  As far as I know SP P300 works well with Win7 32 bit. My brother has the same machine and use it with Win7 too. We checked often performance with different games or playing different videos, mostly from avi or mpeg files. Also very good race and YouTube videos smoothly, so I really don t understand why you have this problem of gel.

  Have you installed the Toshiba download page display driver?
  HARD drive is extremely busy before that happens?

  The same thing happens when you play games?

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• First Pro CS5.5 titreur crashing on start up

  I have a recent issue with the titration module. First Pro CS5.5 Titler crashes constantly when opened. I can not open past projects which includes the titration module or have titles in it. Last night I was finishing a project (of course) who has titles in it. This morning when I tried to open the project, I got the BLUE SCREEN of death. I restarted and was able to open the first pro cs5.5, but it does not display the recent previous projects. It was as if everything got zero including my preferences. I tried to open my project that has titles in first pro cs5.5 accidents and she immediately. I then try just open a blank project and all is well. While in this empty project, open the titration module causes an immediate crash.

  Now, I still have first pro cs5 on the computer so I'll and open an empty project in cs5 and everything's fine. I try to open the module of titration in cs5 and everything's fine. I try to open in my project with securities and well-functioning cs5.5 cs5. It opens and works as it should.  But of course, it's a real pain because my cs5.5 after effects sequences are not backward compatible. I reinstalled first pro cs5.5 and tried everything again (above), but met with the same results. I have the latest version of windows and Quadro 3800 NVIDIA updates. I've been editing on this system for almost a year with cs5 and 3 months with cs5.5 (production premium)

  Specifications of the computer:

  Office high i7 2.8 gHz

  Qudro 3800 with last orders

  Professional drivers latest window 7

  24 GB ram

  7terabites of hard disk space.

  .

  Thanks to Bill Hunt and his article and tread on the corrupted fonts, I was able to find a solution. In fact, it wasn't a police problem, it was one obscured 5.5. file that was bad. Bill that included in his thread. File: 'workingset.prsl' found in the mydocuments/adobe/premierepro/5.5/styles folder.

  I first moved the file out of the folder and first pro 5.5 module titration. He started very well without any problems. I was able to open my previous projects which involved that I wasn't able to open before the titration module. Regenerates the file in the folder styles. I can remove the old file prsl.

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• First Pro CS5 pixelation with T2i .mov files

  Thanks for the great information!

  Here's my scenario...

  • Windows 7 64 bit family

  • Intel quad core processor

  • Nvidia Geforce Gt240 graphics card

  • 8 GB of ram

  • G - tech g-raid0 drive 2 TB (for image storage)

  • WD Caviar Green 500 GB (OS Win764bit & amp; applications)

  • WD 250 GB usb 2.0 external drive (for backup)

  • First Pro CS5 (prod prem) modded to enable nvidia gt240 graphics card be used with the Mercury playback engine

  Backstory:

  I shot a short film of 2 weeks using a Canon Rebel T2i at 1080 p 24 with shutter speed 1/50.

  At the end of the first day of shooting, I had to transfer the .mov footage off the coast of the Trandcend 16 gb class 10 memory cards with card reader Kingston for the Raid. I used a legacy firewire card connected to the aforementioned PC (it's all I got for the firewire connection at the time), and I noticed that the file transfer has been extremely slow. So for the next two days after I transferred the rest of the video on the Raid via USB 2.0 and the other files transferred much faster.

  Play the images using VLC Media Player is well most of the time, but sometimes I see for about 5 frames pixel information is lost. It is not rolling shutter or jello. Part of the pixelated frame strongly for all 5 to 10 frames. I don't know if it's the loss of data on these images? I agree with a few images here or there, I can work around it if I have to...

  The problem:

  I used the DSLR 1080 p 24 preset to set up sequences of the first Pro CS5 project. After you import the images above, reading in two preview windows randomly is pixelated, similar to the effect of VLC, but random parts. For the most part, VLC is compatible with the management of the problem. Whenever I start the first it will be Pixelize frames in different places than before. Sometimes when I run first first is good, then after a few readings, it starts to distort. After management problem for the current session, the pixelation appears in the clips that have the green status bar. Also, sometimes (randomly) some of the clips in the timeline panel have green waves at the bottom of them, or are completely green.

  I tested the raw images in VLC, WMP, Media Player Classic (after you temporarily install KLite hoping to solve the problem). The problem that all .mov files seem to Pixelize the same framework of each player. First, but pixilated times randomly.

  Tried with two mpeg streamclip and even with cineform neoscene U transcoding. Same results.

  I have not been able to narrow down what is the problem. Any ideas?

  Thank you very much.

  The problem is resolved. My cache of media was written to my local hard drive (c :)), a WD Caviar Green 500 GB. It turns less 7200 RPM, as it is friendly green. After clearing the cache and redirect the path to the raid 0 drive 7200 RPM, the media reads in the timeline smoothly without pixelation. A high technology, Adobe has helped me solve this problem after a lot of troubleshooting. Thank you!

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• NVIDIA GeForce GTX 750 first Pro CS5 compatibility

  NVIDIA GeForce GTX 750 4 GB DDR3

  I'm on the purchase of a new pc that has this pre-installed video card.

  Do you know if its compatible with First Pro CS5 and the rest of the programs in this collection:

  Still, After Effects, Photoshop, Illustrator etc. ?

  You enjoy letting me know that the new machine is not cheap and I want to make sure.

  I use Windows 7 Pro.

  Thxs.

  The CUDA Hack:

  enable CUDA?

• For first Pro CS5 GPU acceleration cards

  Hello:

  I'm willing to invest in a GPU graphics acceleration card that will speed up playback and use the GPU mode Mercury playback engine.

  From what I could find on the Adobe site, these are the cards that are supported for Premiere Pro CS5

  Supported NVIDIA video cards for acceleration GPU (CS5):

  GeForce GTX 285 (Windows and Mac OS)

  GeForce GTX 470 (Windows)

  Quadro 4000 (Windows and Mac OS)

  Quadro 5000 (Windows)

  Quadro 5000M (Windows)

  Quadro FX 3800 (Windows)

  Quadro FX 4800 (Windows and Mac OS)

  Quadro FX 5800 (Windows)

  Quadro CX

  Can someone give me a recommendation from your own experience?  Identifies the maps above still valid?

  Thank you

  Rich Locus

  Can someone give me a recommendation from your own experience?

  I found the nVidia GTX 680 to be a good

  cost vs performance choice.

  Identifies the maps above still valid?

  Adobe Premiere Pro CS6 / CC Tech specs

  http://www.Adobe.com/products/premiere/tech-specs.html

  Not sure if this is valid for CS5, but I suspect so.

  Note:

  CS5 might require the 'Cuda Hack":

  CUDA Hack

  minimum 1 GB of video ram

  PC - add:

  (Name of your card) example: GeForce GTX 680

  in this list:

  C:\Program Files\Adobe\Adobe Premiere Pro CS5\cuda_supported_cards.txt

  (or just delete the cuda_supported_cards.txt file)

  Mac:

  How do I enable GPU Cuda in Adobe CS5 for Mac

  http://www.vidmuze.com/how-to-enable-GPU-CUDA-in-Adobe-CS6-for-Mac/

• How can I go to first Pro CS5 After Effects CS6? (Problem)

  Hello

  I try to send my first Pro CS5 video in After Effects CS6, but when I right click on the clip, I can't even option allows you to send to After Effects. I can see the option send to After Effects, but I just can't select it. Any ideas?

  Thank you

  -Billy

  Versions must be the same to make it work.  You will have to perhaps put the original clip in AE and when you're done, export off AE file for use in PP.

• Adobe first Pro CS5 for Mac-installation problem

  I recently bought Adobe first Pro CS5 one upgrade (for Mac) and after I entered the serial number during installation it asks me a serial number of an eligible product, three announcements: first items 4, 7 or 8. I only have first Elements 9. I'd be happy to buy the above products except several sources suggest that PE8 was never produced for Mac. Any ideas of what I can do?

  Contact support and they'll guide you through the process and provide the necessary codes.

  Mylenium

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.