No video playback in first Pro CS5.5

Similar Questions

• What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  What are the best settings for video export in first Pro Cs5.5 in HD MP4 format?

  Any help would be greatly appreciated! Thank you

  Under the H.264 are several presets for ipad.

  Experiment with those.

  http://www.Apple.com/iPad/specs/

  Looks like me 720 p is the largest export format.

• Video card for first Pro CS5

  I'm currently has the NVIDIA GeForce GTX 285, Win7, 6 GB RAM and periodically get the crash program and the following error when you work with projects: driver problem detected OpenGL NVIDIA with the display driver.

  I want to upgrade to a better video card and would like a professional recommendation. I want to stay in the range of $400-$500. Most of the recommendations that I looked on the forum seem obsolete compared to products currently listed on the NVIDIA site. Thank you.

  What Bill meant that with only 6 GB of RAM (which is IMHO not enough RAM to run Premiere Pro CS5 + to the satisfaction of most of the people), the high-end cards would have been a total waste of money: performance of the RAM and the large pagefile expansion will severely limit any provision of performance for the high-end cards to the point where these cards would not be a faster than cards much cheaper. In other words, there is a mounting system as fast as its weakest link (in this case, the low amount of RAM and the generally slow hard disks that are used to Exchange files). Increase in the total amount of RAM 12 GB (or better yet, 24GO) would significantly reduce the need for such a huge, slow the pagefile access. Even the fastest SSD can't stay with the RAM in terms of throughput and latency for access.

  And which causes this slow performance of your system is Windows increases generally the file exchange - and with only 6 GB of RAM and a relatively heavy such as Premiere Pro resources application, it would requre a rather huge swap file. By default, Windows sets the size of the initial pagefile roughly equal to the amount of RAM installed. What is happening here is that the difference between the amount of installed RAM, used by the first and the amount of space for swap file that requires the app is so great that it would have potentially forced the size of pagefile to mushroom in many more than 10 GB. This considerably reduces the performance of the total system, performance not only in first. Even if the size of the pagefile in Windows for an amount well above the RAM installed will not completely solve the problem of slow because no disc is nowhere nearly as fast as RAM. But if you do not use a swap file, especially with a low amount of RAM installed, the system will crash during a session of editing/rendering/encoding with "out of memory" errors.

• Help! Dropout regular while importing video HDV on first Pro CS5.

  Despite all the research, I am at a loss of responses with this one. Hoping that some may have a good suggestion for a solution.

  I've been using my camcorder Sony HDV HVR - V1P for awhile through Premiere Pro CS4 and now have CS5. I had no previous issues with abandon, aside from the very occasional drop out, which I understand may be due to faulty tape, dirty heads etc.

  I don't think it's my problem now, and I will explain why.

  On my last batch of tape dropouts on the tapes occurs regularly, and I say well regularly. I could almost 58 seconds between each leg. This has happened more than 5 bands, some of them from different batches (used HDV Sony mini DV tapes). Now believe it may be a dirty head problem, or even a bad batch of ribbons, I picked up some of the bands. The surprising thing is the abandonment occurred yet, but they are in different places on the Strip. So if the abandonment took place on specific portions of the film before, he now abandoned in other sections and as regularly as before. Then of course, lack of camera? I don't believe it. I captured some of the images with a second camera where abandonment show also in the catches. I also tried to capture images using the second camera in case there was a problem of output or fault. School drop-outs has yet occurred. I also tried different tracks with the same result. I also captured the images on different hard drives on the PC, still no change. With all the attempts of the sequence was captured as mpeg clips as I always did before with success.

  If I send this Hail Mary hoping someone may know the cause, or have a suggestion, why this happens all of a sudden. Nothing on my system has changed and am running 64-bit Windows and have a lot of speed and ram. I ran first pro, AfterEffects and photoshop similaneously progams and PC faces very well.

  Appreciate any suggestions. Or any other ideas of what to try to locate the problem.

  Thanks in advance.

  I would look at the processes running until I started watching material error.

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• First Pro CS5.5 crashes during video playback

  IT's REALL Y F * KING BORING. First Pro CS5.5 crashes when I press space (or by clicking on the Play button), it is impossible to change. Here are my PC specs.

  OS: Windows 7 Professional x 64

  CPU: AMD FX 6300

  RAM: 8 GB

  GPU: AMD Radeon 6570 2 GB

  QuickTime version 7.7.3

  All of my graphics drivers are up to date.

  Please help. I can't change it now.

  Oh and by the way, this is not happened with Premiere Pro CS6.

  What about the rest of the information requested in the Information http://forums.adobe.com/message/4200840 FAQ

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• First Pro CS5 pixelation with T2i .mov files

  Thanks for the great information!

  Here's my scenario...

  • Windows 7 64 bit family

  • Intel quad core processor

  • Nvidia Geforce Gt240 graphics card

  • 8 GB of ram

  • G - tech g-raid0 drive 2 TB (for image storage)

  • WD Caviar Green 500 GB (OS Win764bit & amp; applications)

  • WD 250 GB usb 2.0 external drive (for backup)

  • First Pro CS5 (prod prem) modded to enable nvidia gt240 graphics card be used with the Mercury playback engine

  Backstory:

  I shot a short film of 2 weeks using a Canon Rebel T2i at 1080 p 24 with shutter speed 1/50.

  At the end of the first day of shooting, I had to transfer the .mov footage off the coast of the Trandcend 16 gb class 10 memory cards with card reader Kingston for the Raid. I used a legacy firewire card connected to the aforementioned PC (it's all I got for the firewire connection at the time), and I noticed that the file transfer has been extremely slow. So for the next two days after I transferred the rest of the video on the Raid via USB 2.0 and the other files transferred much faster.

  Play the images using VLC Media Player is well most of the time, but sometimes I see for about 5 frames pixel information is lost. It is not rolling shutter or jello. Part of the pixelated frame strongly for all 5 to 10 frames. I don't know if it's the loss of data on these images? I agree with a few images here or there, I can work around it if I have to...

  The problem:

  I used the DSLR 1080 p 24 preset to set up sequences of the first Pro CS5 project. After you import the images above, reading in two preview windows randomly is pixelated, similar to the effect of VLC, but random parts. For the most part, VLC is compatible with the management of the problem. Whenever I start the first it will be Pixelize frames in different places than before. Sometimes when I run first first is good, then after a few readings, it starts to distort. After management problem for the current session, the pixelation appears in the clips that have the green status bar. Also, sometimes (randomly) some of the clips in the timeline panel have green waves at the bottom of them, or are completely green.

  I tested the raw images in VLC, WMP, Media Player Classic (after you temporarily install KLite hoping to solve the problem). The problem that all .mov files seem to Pixelize the same framework of each player. First, but pixilated times randomly.

  Tried with two mpeg streamclip and even with cineform neoscene U transcoding. Same results.

  I have not been able to narrow down what is the problem. Any ideas?

  Thank you very much.

  The problem is resolved. My cache of media was written to my local hard drive (c :)), a WD Caviar Green 500 GB. It turns less 7200 RPM, as it is friendly green. After clearing the cache and redirect the path to the raid 0 drive 7200 RPM, the media reads in the timeline smoothly without pixelation. A high technology, Adobe has helped me solve this problem after a lot of troubleshooting. Thank you!

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• NVIDIA GeForce GTX 750 first Pro CS5 compatibility

  NVIDIA GeForce GTX 750 4 GB DDR3

  I'm on the purchase of a new pc that has this pre-installed video card.

  Do you know if its compatible with First Pro CS5 and the rest of the programs in this collection:

  Still, After Effects, Photoshop, Illustrator etc. ?

  You enjoy letting me know that the new machine is not cheap and I want to make sure.

  I use Windows 7 Pro.

  Thxs.

  The CUDA Hack:

  enable CUDA?

• Preview the video in Adobe first Pro CC stutters badly all playing on a portable powerful

  I bought 4 months ago relatively powerful computer laptop specially for my needs of video editing with first Pro CC, but so far it has been very frustrating experience.

  Lenovo Y40-80

  Intel i7-5500U

  16 GB OF RAM

  SSD 512 GB

  AMD Radeon R9 M275 4 GB

  Screen LCD 1920 x 1080

  Play timeline (4K clips without any effect applied) in the window saccade preview so bad that it is almost impossible to use the software. Reading is relatively smooth 3-5 seconds and after that it significantly slows down to 2-3 frames per second (the other images are deleted).

  I tried all the latest AMD Catalyst, including the version beta drivers. Complained about the AMD forum. Reduces the resolution of reading from 1/2 to 1/8 with no visible effect. In fact even the discreet GPU through the BIOS turn off have not declined over the playback speed. Passage of the first CC (2014) to CC (2015) doesn't change anything either.

  Interestingly enough, feature as 4K quality export works well enough, with a speed comparable to my office for 4 years. The office manages very well the process of edition, and based on the specifications of the laptop must have about the same performance as the office.

  Suggestions, please?

  your cpu is one of the scam i7 from intel. It is a core 2 and not 4 core performance is cut in half compared to the 4 core i7 about the same price. for comparison, your cpu is the same speed as an office i3 cpu. You can try to sell the lenovo and get an i7 core 4 with a gtx 970 m or 980 m.

• How can I go to first Pro CS5 After Effects CS6? (Problem)

  Hello

  I try to send my first Pro CS5 video in After Effects CS6, but when I right click on the clip, I can't even option allows you to send to After Effects. I can see the option send to After Effects, but I just can't select it. Any ideas?

  Thank you

  -Billy

  Versions must be the same to make it work.  You will have to perhaps put the original clip in AE and when you're done, export off AE file for use in PP.

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.

• First Pro CS5.5 never started place... error message each time. Help please?

  Hello...
  
  I recently bought the suite Production Premium CS5.5.
  
  Most of the work programmes. (I have not tried ALL the.) But the main - CS5.1 Photoshop and After Effects - work perfectly).
  
  But first Pro CS5.5.0 does not open. Keeps giving me the good old error message: "Adobe first Pro CS5.5 has stopped working". What happens whenever I try to open it. And it is never past the opening screen. He is MIGHTY frustrating. And there seems to be no coherent advice in this field all over the Adobe Forums. Maybe I've not spotted.
  
  I run a Fujitsu Lifebook T901, using Win 7 64 bit Version Service Pack 1 Build 7601 6.1.7601
  
  Processor Intel (r) Core i7 - 2620M 2.70 GHz, 2701 MHz, 2 Lossnay, 4 logical processors
  
  Version of the FUJITSU BIOS/Date / / Phoenix Technologies Ltd Version 1.04, 17/02/2011
  
  8 GB of RAM.
  
  Please guys... what should I do?
  
  Operating system: Windows 7
  Printer model / version of the driver: Intel HD Graphics Family
  Video display card / driver version: 8.15.10.2246
  He has already worked? If so, what has changed? (provide comments in the description field): No.
  Same results with different files? : not Applicable
  Same results with different computer? : not Applicable
  Change recent system hardware or software? : no

  Alan is correct.

  Here is an overview of the system requirements:

  http://www.video2brain.com/en/videos-5351.htm