Help - Flash 8 display bug w / transparency and Drawing API

Similar Questions

• When I start Windows XP, my screen flashes, a help option is displayed in the taskbar and my audio and video have disappeared.

  After I start my system (XP) my audio system works very well. After some time the HELP screen flashes option appears on the taskbar and my audio and video sounds have disappeared. I can hear system sounds. I downloaded Fixit from Microsoft Support for its repair. But when I run it I see a runtime error 80040402. 2-3 days back, I had installed Avast 6.0.100 to get rid of a deadly virus that infected my flash drives. Since then, I have this problem. Help, please?

  original title: Sound stops working after a while

  Hello

   
   
  Follow these methods mentioned below and check.
  Method 1: run a scan for viruses with Microsoft Safety scanner and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: Before performing safety analysis make a backup of important data.
   
   
   
  Method 2: The scanner (System file check) SFC and check if there are any file system corruption.
  a. to do this, click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747
   
   
   
  Method 3:
  How to update a sound card driver in Windows Vista and Windows XP
  http://support.Microsoft.com/kb/166774
   

• Flash plugin display bug

  Hi all!
  
  I really hope you can help me! I did a site in Flash 8 Professional that has a main index.fla that loads different SWFs into a square, according to a menu on the left.
  
  Nothing special, except for the fact that almost every time the sections of swf are loaded, the flash plugin displays half of still less the content that should appear. To see the contents of a section, click the button in the section several times and finally everything is displayed.
  
  This does not happen on the local computer, but it also happens in IE and Firefox on my computer and much else as well the computers of people who have accessed the site.
  
  For those who want to have a look at the site, the address is
  happilyeverafterdr.com bug
  
  
  Thanks in anticipation,
  Ciprian
  

  Hello!
  Sorry for the late reply, seems real life made me...

  It was indeed poor design... my charger was testing _root.getbytestotal against _root.getbytesloaded to see if it's done
  but of course who does not work in a file external loaded swf.

  Also, you're right with the code in the files! I had to change it in each file, so I guess I won't remember to do as
  you said the next time.

  Thank you very much

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My "file, editing, display, history, Favorites, tools and help" options are hidden, I do not know how to make them visible.

  My "file, editing, display, history, Favorites, tools and help" options are hidden, I do not know how to make them visible.

  This has happened

  Just once or twice

  == My father-in-law messed with settings and downloaded a toolbar.

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• Hello... I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other

  I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other credentials?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Error message "To display the contents of the Flash technology in this PDF file, please install this version of Flash Player that supports Adobe Reader and Acrobat".

  I converted MS-Outlook 2010 e-mail folder (and emails) into a PDF portfolio. When I have Adobe Reader X R-clicked, selected, I got and error message "To display the contents of the Flash technology in this PDF file, please install this version of Flash Player that supports Adobe Reader and Acrobat". I get the same msg when I try to open it with Acrobat. He worked the week last in Adobe Reader. I have the latest version of Flash Player installed. The portfolio opens when I click on < more >, but the Index is missing and I can't get to the first email. PC platform. Anyone else having this problem? If so, how to fix?

  You are running Internet Explorer by chance? If so, the Flash Player you have is NOT in need of Adobe Reader and Acrobat. If there is a link in the message, use that, rather than assuming that you already have Flash Player. If this does not work, let us know.

• FireFox has gone completely transparent and nothing works

  I was in the middle of surfing when suddenly, Firefox went completely transparent and there is nothing I could do. Only minimize, restore and close works.

  I tried to update flash, re-installing of Firefox and nothing works.

  http://ImageShack.us/a/img5/8683/75930925.jpg
  http://ImageShack.us/a/img18/1740/89238227.jpg

  Hello yAxOr, can you try to start firefox in safe mode by pressing the SHIFT key during startup of this and see if the problem occurs there too? Maybe a theme or hardware acceleration intrudes here...

  If safe mode does not work, you can try to disable hardware acceleration in firefox > options > advanced > general and or disable addons that could cause the problem. It would also be interesting what graphics hardware (description of the adapter, driver date and version of the driver) you use - you can access this information in firefox > help > correct information to the bottom of this page... Thank you

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Display driver stopped responding and has recovered

  Product: HP Pavilion dv7-6015tx Entertainment Notebook PC

  OS: Windows 7 32-bit

  Status: Clean installed Windows 7 Ultimate 32 - bit Windows 7 Home Premium 64-bit

  Hello

  I had several cases where the computer seems 'lag '.

  then, after a few flickers on my screen, Windows would give the error:

  "Display driver stopped responding and has recovered."

  There are still effects after this message.

  When dragging windows, scrolling top-down graphics etc. continue to Flash.

  This isn't all in hardcore, the GPU was not operating at high temperatures.

  Interestingly, I don't have this problem when I'm in the middle of hardcore games.

  The CPU was not under heavy load, the CPU was not working at high temperatures either.

  I checked the temperature with thermal control (HWiNFO32).

  I have a lot of resources, 1223MB of RAM to spare.

  I also have lots of HARD disk space too.

  I installed the latest version of the graphics driver for my product: AMD graphics driver high definition,.

  but the problem persists.

  Help, please!

  -John

  I understand your frustration, I had the same problem, I really did, for centuries!

  Try this:

  Do not go on the AMD website for a video driver. those who do not work properly for some reason any...

  Download on the HP site specific to your HP product, for example, I have a dv7 6015tx with 32-bit windows.

  Then I'd go to: dv7-6015tx drivers

  If you still have the drivers on AMD ATI Web site, uninstall them, restart.

  Go to the HP site where you can find specific drivers for your product HP, installation, restart.

  It seems trivial, but it's IMPORTANT and most of the time to restart after uninstalling and installing.

  It worked for me, hopefully it will erase your questions, good luck.

  -John

• Re: Qosmio X 500 - 11Z - display driver stopped responding and has recovered

  REF: PQX33E-02J00TCZ

  Hello, I had this problem:

  my friend bought new Qosmio for games... and the problem is with the graphics card Nvidia GT 360 M
  graphics card says this: display driver stopped responding and recovered... the screen flashes twice and its ok.
  its when I start windows (windows 7 HP 64 bit) or when I click in the Device Manager on the graphics card, on Internet when I surf... ordinary work, anything heavy for laptop as this :-)
  I changed my driver - standard uninstaller, then clean the pc with cc cleaner and install new drivers
  error still persists to say that...

  I tried the drivers nvidia and support toshiba official. the same two. problem remained.

  can anyone help?

  Hello

  To be honest, it is one of the most annoying problem in this forum. You can find many threads dedicated to, display driver stopped responding and has recovered, problem. There is no good solution for it. I solved this problem by installing a driver from nvidia.com site viewing, but I Gt 230 m. Don't know if this can help you too...

• DVP11 - Display Driver stopped responding and has recovered

  Hey guys,.

  Last month I had problems with the display driver.  Sometimes when I'm on the desktop (using Microsoft office products), the screen entirely black flash mode for a few seconds, once my office reappears, a message will be will jump to the top of the notification bar indicating that the "display driver stopped responding and has recovered."  I've updated some drivers, but nothing seems to help.  Is there a particular reason why it continues to be?  All solutions? Thank you.

  See this thread please and close this one.

  http://en.community.Dell.com/support-forums/mobile-devices/f/3824/t/19566729

• When I try to logoff, the screen starts to Flash as trying to load screen and then finally shuts down the computer.

  Original title: Windows 7 problem

  I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.

  Hello

  Here are a few questions to better understand the issue:

  1 made only while off log?

  2. what happens when you restart?

  3 have you tried with different user accounts?

  4 you did changes to the computer before the show?

  Let us try the following and see if they help.

   

  Method 1: Check the event viewer for more details on this subject.

   

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

   

  Method 2: Run the following fix:

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  Method 3: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 4: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

• Log in my account - it flashes from office to home screen, and you can't do anything.

  Original title: flashing screen

  I had this problem for a while. I was using the guest account, now I can't access it. When I connect to my account the screen flashes and I can't do anything. My apps are missing too. It flashes from office to home screen, and you can't do anything.

  Hi ElizabethK94,

  We need more information to help you, please answer these questions.

  1. Are you using a 3^rd party antivirus application on your computer?
  2. Are what applications you referring?
  3. What happens when you try to access the user account guest?
  4. You did changes to the computer before this problem?

  A guest account is an account for users who do not have a permanent account on your PC. It allows people (invited) to use your computer without having access to your personal files. Users logged on to the guest account cannot install applications or hardware, change PC settings or create a password.

  Refer to the following and check information. This will help you to solve the problem of flashing screen.

  I suggest you to update the drivers to display the computer manufacturer's website and check if it helps.

  Troubleshoot video card

  http://Windows.Microsoft.com/en-in/Windows-8/troubleshoot-video-card-problems

  If the problem persists, start the computer in safe mode and check.

  Start settings for Windows (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  As a work around, I suggest to create a new user account and check the status of problems in the new user account.

  Create a user account.

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  Enable or disable the guest account and check. This should help you solve problem of guest user account.

  1. open the Control Paneland click / tap on the user accounts icon.

  2. click on / press the link Manage another account .

  3. If prompted by UAC, then click on/tap on Yes.

  4 click / tap on the host list account and do step 5 or 6 below for what you want to do.

  5. to turn off the guest account

  (A) click/click on the Start buttonand go to step 7 below.

  6. to activate the guest account

  NOTE: It is the default setting.

  (A) click on the link Activate the guest account .

  7. Once completed, you can close user accounts if you wish.

  Hope the helps of information. Let us know if you need help, we will be happy to help you.

• Help! Print to PDF with transparency?

  I have a (8 x 16 spreads) document related to PDF files, updated frequently via Photoshop.

  Make sure that the image mode is 8 channels, PDF files import into Design with transparency on the workspace.

  However, when you try to print to a PDF file, transparency is flattened and replaced with a white background > :(

  The idea is to use the paper color as the background instead of printing a block of white ink.

  Forgive me if I'm missing something obvious - I tried different formats (png, tiff), flattering transparency 'preset' setting to 'high quality' and juggle with PDF printer driver settings.  Displaying print PDF in Acrobat displays a white background on a transparent paper.

  Its interesting to note the In-design background prints transparent (between related images), but not the transparent parts of the image/PDF files themselves.

  Help, please!

  Dropbox link to examples of files with parameters:

  https://www.dropbox.com/sh/mh7pwit3amrwtw1/AABZbuCr6E7Y-0_2GWJAjQ-ta?dl=0

  Thanks for any help or ideas that you can give!

  When you create a PDF file you must never use the print to PDF or use any kind of Postscript.

  Any PDF from InDesign file is to be exported, a PDF from Photoshop or Illustrator must be saved in PDF format. If you exchange PDF files between these applications to export or save as PDF/X-4.

  Print or postscript will never support transparency, so do not use distilled, print to PDF, PDF1.3, EPS.

  Do not PNG or TIFF with vectors.

  BUT change the color of the paper will have no effect. If you need to print a background color different other than white, you should add a layer below all layers, name it background and draw a rectangle of guide line for the purge frame bleeding frame guide line in the desired color.

• My Flash CC display problem

  Hello

  I had a few Flash CC display problem

  And I don't know how to solve.

  Please help me.

  I recorded two videos to show how is the footstool of problem.

  Thank you

  https://DL.dropboxusercontent.com/u/22587478/video%209-27-15%2c%203%2003%2036%20PM.mov

  https://DL.dropboxusercontent.com/u/22587478/video%209-26-15%2c%2010%2053%2052%20PM.mov

  The computer news

  System manufacturer: Micro-Star International Co., Ltd.

  System model: GS60 2QD

  BIOS: E16H5IMS.10D

  Processor: Intel Core i7-4720HQ CPU @ 2.60 GHz (8 CPUs), ~2.6GHz

  Memory: RAM 16384MB

  OS: Windows 8.1

  Thank you, Mohan.

  I adjusted the size of any element to 100%, like this picture https://dl.dropboxusercontent.com/u/22587478/11.J...

  and solve this problem. Thank you!!