Help! Hard drive to the AutoFormat when connected to the router

Similar Questions

• external hard drive is not displayed when connected

  I have a WD My Passport external hard drive. He pointed upward and it worked fine. Two days ago my MacBook Pro started acting strange and became UNBELIEVABLY SLOW. Now it is still slow with some programs, and when I plug in my external hard drive it won't even appear on my desktop or the finder. I restarted my computer - has not yet shown and I stop everything, everything, including the power cable disconnected, is to let it sit for a few hours, transformed, plugged return it in and still don't appear. It has pictures and that's what I use to store photos that I have him Add. I need help! I am a photographer and it is essential that it works! If anyone has any suggestions please let me know! Thank you for taking the time to read this and any help! Thank you!

  Does show in disk utility?  Have you plugged into another Mac?

  Ciao.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect the external hard drive on the computer of Windows 8

  Hi I have a laptop Windows 8, I don't know too plug I bought last year I recently bought a samsung 3 TB external hard drive I plugged it in and it was recognized tried to transfer files (photos and music) he transferred a little then kept showing error e/s even when I clicked ignore it just kept showing for the next photo , so I unplugged and ive not touched since ive then connected again today to have another shot at it but it does not even appear in the my computer part now ive red somewhere else on this site to go into Device Manager and I can see the mass with a yellow triangle storage device small as he said he could on the subject , I was reading I uninstalled and plugged the hard drive on and when I plug it then settling again, nothing appears when I go back into Device Manager it is there once again with the yellow triangle, thanks in advance if anyone can give me advice.

  Thanks for the reply.

  Have you tried to uninstall and reinstall the USB controller drivers?

  If so, have you installed latest drivers from the motherboard chipset?

  Follow the steps below and check if it works:

  1 download the drivers for external hard drive from the following link and check.

  http://www.Samsung.com/us/support/downloads

  2. click on the link to the HP Web site below to download the latest drivers. Search for drivers related to USB / external peripheral.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5078476

  Click scan now.

  
  3. If you have a third party security/firewall software installed, you need to change settings or disable it temporarily.
   
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software / update, you must reactivate as soon as you are finished. If you are connected to the
  Internet or network so that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  I hope this helps. Back to us for assistance.

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I don't think that you can do in XP. I think that you need x 64 XP, Vista x 64 win7 x 64 or windows server x 64. As it says here

  The only thing you can do in XP's format

• When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

  I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
  When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
  For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
  I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

  The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

• Why my hard drive doesn't show when burning a DVD, but it shows if you're going to burn an AVCHD? the first items 14.1

  Why my hard drive doesn't show when burning a DVD, but it shows if you're going to burn an AVCHD? the first items 14.1 Windows 10

  

  

  Thank you

  It turns out it was 10 Windows and drivers which caused problems.

• E-Machine with XP when you don't use shutsdown. Hard drive stops but starts when the mouse moves. But XP does not start. Need to unplug and then plug in and start the PC.

  ' ' I get the error message 'A' recovered from a serious error report = ' BCCode ea BCPI 8507b6e8 BCP2 869 B 7800 BCP3: 869 B 8378.  Included files: "owner\locals\locals ~ 1\temp\wer9274." DIR00\MINI 121909-02mp "Hope someone understands. I keep the hard drive running to collect the info from my weather station.

  Go into Control Panel, then Power Options.

  On the power management tab, what is your power mode? Below which correspond to the parameters for this method of power - to turn off the monitor, hard drives & go standby time of the system.

  If you want to keep the hard drive, scroll down the drop-down lists & select "Never" turn off hard drives and the day before.

  Go to the Hibernate tab, and then remove the tick in the enable hibernation check box.

• Install windows 7 on the new hard drive getting the error cannot continiue

  I bought a new drive hard seagate from my existing was only 250 gig, so this is a new clean install, I installed the drive hard drive start the computer with the dick of installed Starter, he began to load then I get this error message saying;
  "Update failed due to a stop press unexpected ok to restart the computer." Installation will continue after the computer restarts. »
  However, when you press ok, the machine starts, but continues to display this error message and so am now stuck in a loop. What can I do to stop this, because I am totally confused. I have a second hard drive in the machine, but when it is started, he found the new HDD 1000 GB.

  I am running Windows 7 (64 bit),

  Processor AMD Phenom 11 X 4 3.4 ghz AM3 Quad

  MSI 790XT-G45 AM3 / AM2 + / AM2 AMD 790 X ATX card mother AMD

  Any help would be appreciated

  First chech that the BIOS is configured to use the CD/DVD drive as frist boot device.

  Then remove the old drive and only connect the new drive.

  Start the PC and insert the CD that you created and boot from the CD.  If there is a "Long full" test, which is that you need to perform. Also check the SMART data (look for bad sectors).

  J W Stuart: http://www.pagestart.com

• Photo date change during transfer to external hard drive from the "Photos" application

  Hello

  When I try to transfer the images to my request for 'Photo' on my Macbook (OS X Yosemite) to a hard drive external, the dates and times of the images change.

  I would like to transfer only some of my images on the hard drive, so I can't make time machine.

  Is it possible to keep the dates and hours of original photos when copying them?

  Thank you very much for your help!

  Select the photos and export (menu, file == > export)-this will include the Photo with date and time metadata in EXIF/IPTC fields for use by any porgram Photo (you can check this by using Preview)-as you create new files file metadata will obviously be new but we can't change the photo metadata

  LN

• Upgrade the hard drive in the Libretto U100 to SSD drive

  Anyone who undertakes an upgrade of the hard drive in a Libretto U100 to a SSD? This would surely greatly improve performance. What size is the hard drive in the U100 and which connector is used to connect the drive? Can anyone tell if this mod is possible?

  Spymaster

  So, I have a machine with an SSD (Tecra M5) and it works like a charm. Unfortunately, the discs are too expensive at the moment but you can benefit from a real performance.

  Regarding your question: should be possible. You have a 1.8 inch drive "installed and there are SSDS which have almost the same form factor. Usually the U100 was delivered with MK6006GAH or MK3006GAL disks.

  Here´s a site that might help, given that the reader has the same connector as the disc in your computer: http://www.dvnation.com/microatapics.html

  Just check it out and I hope you can use my index research on SSDS... :)

  Welcome them

• Portege 3500 didn't detect the HARD drive in the BIOS

  Hi forum,

  I go out the HARD drive, when I stick to the rear; the BIOS didn't detect the HARD drive.
  How can I configure the HARD drive in the BIOS? The discs i/o isn't editable t option.

  I need urgent help...

  Thank you

  Try to access the BIOS and set the defaults. Don t forget to save the changes. ;)

  A friend of mine had a similar problem and the BIOS default settings has been the key.

  So check it out

• Password Protection for hard drive on the Libretto U100

  I want to protect my data in the event that I should lose my U100. Initially, I asked a password to the Bios, which is quite easy using Toshiba Assist/user password. But even better would be to apply the same password on the hard drive as well. On the Tecra M5, you can make this Toshiba Assist and safety help, but there is no option on my U100.

  The Bios has options to enter a 'HARD disk' password but when I try to do, he turns back to "Unlisted" when I try to save the change.

  There is no mention of HHD password in UK documentation, but the Australian version seems to have the feature. This site http://www.continent.com.au/buy-1990.html claims "hard drive password prevents unauthorized hard disk access and can be synchronized with the password" – that sounds just the same as on my M5.

  I would like to know if anyone here has had success with application to a disk to their U100 password.

  Hello

  Toshiba security help is not installed on the Libretto U100 and so you cannot use this function as on the Tecra M5.

  Sometimes, the HARD drive password can be set in the BIOS.
  If you want to set the password disk HARD check if it can be done in the BIOS!

  But attention!
  If you forgot the disc HARD password you will not be able to access the HARD drive and the HARD drive is no longer accessible.

• Pavilion Entertainment PC dv6: need a new hard drive for the dv6-1230us

  My question is about the HP Pavilion Entertainment dv6-1230us PC. Recently, it was abandoned, and since then it has been giving me the following message if poster every time it starts.

  Not found boot device
  
  Please install an operating system on your hard drive.
  
  Hard Drisk (3F0)
  
  F2 System Diagnostics
  
  "For more information, please visit: www.hp.com/go/techcenter/startup"
  
  I know it's important to run the hard drive test, but when I run the diagnostics of the system for the Test drive, it says:
  "HDD test failed.
  There is no hard drive.

  I was also on the proposed site and even after "reset my BIOS to default", it recommends running the hard drive test, which does not simply because it has not really helped me the "there is no hard drive. There was a YouTube video that I came across thus suggested pulling the hard drive and diconnecting and reconnect to correct the error in this case that the son is detached, but that no longer works.

  SO, I don't know if there is anything more that I can do, I guess that the hard drive is super dead.

  It comes with a Seagate ATA hard drive. I was wondering if I could replace it with a SATA hard drive or should it be an ATA? (Even has the material capacity to support a SATA drive?)

  Also, it is even useful to replace the hard drive? Should I get a new laptop instead? This laptop is used mainly for just browsing online and checking emails.

  Any help is appreciated, thanks.

  Yes, the hard drive is so dead, that he not yet register as a hard drive. The dv6-1000 series certainly uses SATA, not ATA drives so I'm not sure of what you see. You can replace it with any drive SATA 2.5 inch width 9.5 mm thick.

  Watch this video between: 53 and: 59 and see that it's a SATA drive. If yours is different, so you have confused with your model.

  https://www.YouTube.com/watch?v=QQx7PlIXFuE

  Hard disks are a small fraction of the cost of a laptop and if your what it takes to, I would say that to replace the hard drive rather than buy a new one.

  It is an excellent drive at a great price:

  http://www.Newegg.com/product/product.aspx?item=N82E16822236563

  You have recovery discs? You run Windows 7? Post back if you need help more to restore system software.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.