Impossible to pass boot config
I am trying to upgrade my vista home Prem for wind 7 home Prem I have a drive. When I try - it stops & 'impossible upgrade boot configuration' when I check msconfig, it says just "vista home prem' under the boot section. Help
Hello
It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly
check with them
and read this
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
_____________________________________________________________
and the link below is the Forum of installation of Windows 7 for questions about installing Windows 7
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
Tags: Windows
Similar Questions
-
IPS is impossible to pass the signature
MY client pointed out that IPS modular is impossible to pass the signature in the ASA5510, there already purchase the license.
Can I upgrade the IOS ASA or do something else?
What is the formal process to solve this problem?
the error is as below:
Cannot upgrade the software on the sensor.
-This upgrade must be installed on a sensor with 4 engine version
The currently installed version of engine is 1.
SLPG-BOH-AIP # show version
Application partition:
Cisco Intrusion Prevention System, Version 7.0000 E1
Host:
Domain keys key1.0
Definition of signature:
Update of the signature S302.0 2007-09-17
Virus update V1.2 2005-11-24
OS version: 2.4.26 - IDS-smp-bigphys
Platform: ASA-SSM-10
Serial number: JAB09410434
License expires on: 26-Sep-2011 UTC
Sensor time is 192 days.
With the help of 609878016 of 1054670848 memory available bytes (57% of use)
system is using 17.4 M off 29,0 M bytes of disk space available (60% of use)
the application data uses 45.0 M 166,8 M bytes of disk space available (28% off
its use)
start using 35.2 M off 68.6 M bytes of disk space available (54% of use)
MainApp to Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru
nning
AnalysisEngine-Z-2007_SEP_26_11_54 (press release) 2007-09-26 T 12: 09:32 - 0500 Ru
nning
2007_SEP_26_11_54-Z-CLI (release) 2007-09-26 T 12: 09:32 - 0500
Upgrade history:
IPS - K9 - 5.1 - 7 - E1 10:24:03 UTC Friday, August 5, 2011
Version 1.1 - 7, E1 0000 recovery partition
SLPG-BOH-AIP #.
You must upgrade the IPS module to the latest version first before that you can update the signature. The current version of 7.0000 E1 software is very old, and the latest available version is now 7.0.5a (E4). E1 engine is very old and is not compatible with the signature that runs on the E4 engine.
Here are the release notes for 7.0.5a (E4):
http://www.Cisco.com/Web/software/282549758/50172/IPS-7_0-5A-E4_readme.txt
You need to upgrade the module running at least version 5.1 (6) E3 before you can upgrade to 7.0.5a (E4).
Once the IPS module has been upgraded to version 7.0.5a (E4), you can update to the latest signature.
I hope this helps.
-
Impossible to pass to windows 8.1 even after the clean boot
Hello
I just bought laptop Asus S400C with pre-installed Windows 8 unique language. I wanted to update Windows 8.1, but after two weeks of frustrating, I can't still day. I get the message "error 0x80072f78".
I tried to install other applications, but each only apps, I tried to download failed and gave me the same error message. Strangely, I can update applications that was already installed, as Adera, music, maps, photos etc. I can just download and install the new.
I tried to empty the cache to store, I adjusted the time, restore to factory setting, installed the latest Windows updates, but still nothing works.
My last attempt strives to upgrade in clean boot environment, but the store cannot connect to internet. I ran the network troubleshooting and the result was "the remote device or resource does not accept the connection.
Is there anything else I can do to update, or at least to know what is the problem with my settings so I can fix it?
Thank you much for the help.
Best regards
I ended up working there. It has something to do with IE. I have reset the Internet Explorer settings to their default conditions and now I can update.
Thank you very much to all those who responded. You are the best.
-
Impossible to pass traffic through the VPN tunnel
I have an ASA 5505 9.1 running. I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.
Here is my config
LN-BLF-ASA5505 > en
Password: *.
ASA5505-BLF-LN # sho run
: Saved
:
: Serial number: JMX1216Z0SM
: Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
:
ASA 5,0000 Version 21
!
LN-BLF-ASA5505 hostname
domain lopeznegrete.com
activate the password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.116.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP 50.201.218.69 255.255.255.224
OSPF cost 10
!
boot system Disk0: / asa915-21 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain lopeznegrete.com
network obj_any object
subnet 0.0.0.0 0.0.0.0
the LNC_Local_TX_Nets object-group network
Description of internal networks Negrete Lopez (Texas)
object-network 192.168.1.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
object-network 192.168.3.0 255.255.255.0
object-network 192.168.4.0 255.255.255.0
object-network 192.168.5.0 255.255.255.0
object-network 192.168.51.0 255.255.255.0
object-network 192.168.55.0 255.255.255.0
object-network 192.168.52.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.56.0 255.255.255.0
object-network 192.168.59.0 255.255.255.0
object-network 10.111.14.0 255.255.255.0
object-network 10.111.19.0 255.255.255.0
the LNC_Blueleaf_Nets object-group network
object-network 192.168.116.0 255.255.255.0
access outside the permitted scope icmp any4 any4 list
extended outdoor access allowed icmp a whole list
outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 741.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
outside access-group in external interface
!
router ospf 1
255.255.255.255 network 192.168.116.254 area 0
Journal-adj-changes
default-information originate always
!
Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.201.218.93
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
no use of validation
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
crypto isakmp identity address
Crypto isakmp nat-traversal 1500
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access insidea basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
username
username
tunnel-group 50.201.218.93 type ipsec-l2l
IPSec-attributes tunnel-group 50.201.218.93
IKEv1 pre-shared-key *.
NOCHECK Peer-id-validate
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e519f212867755f697101394f40d9ed7
: end
LN-BLF-ASA5505 #.Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:
packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail
(simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)
-
Impossible to pass to an SSD?
OK, so I just bought a HP 15-inch touchscreen car braidja color blue. After I installed an SSD, I get a BOOT DEVICE NOT FOUND.
I rund the hard drive test and pass it. So I call HP and the guy said that my laptop cannot be ugraded with a SSD?
I assumed all justt what came out in 2014 could be upgraded to an SSD?
Any help would be great. Tahnks
No you can't do it this way. Put the hard drive in the laptop and make the HP recovery disks. Use it to restore Windows 8.1 on the SSD.
-
Impossible to pass the numbers or iWorks
somehow, I lost my iMac iWorks. I reinstalled the original version. Always impossible to open my files. I'm trying to upgrade, but nothing happens.
Hi Mike,.
What "original version" numbers you have reinstalled? How you don't have reinstall it?
What version you are trying to upgrade to?
Kind regards
Barry
-
Impossible to pass to OS Sierra
everytime I try to upgrade my MacBook Pro, it indicates an internal error prevented the update from happening. I tried everything I can think of. The previous operating system installation and try again to reset the NVRAM, I'm confused as to what might prevent installation to compete successfully. And advice would be greatly appreciated.
Hi Tommyweather,
Thanks for posting in the Community Support from Apple! I understand that you are unable to update your MacBook Pro with macOS Sierra because you get an internal error. I always like to make sure that I keep my Mac to date with the latest version of the software, so I can understand wanting to make sure that you are able to update your Mac also. I'm happy to offer some suggestions.
Before going through the troubleshooting steps, I recommend to backup your data using Time Machine. The steps that I will recommend should not erase your data, but it's always a good idea to ensure that your data is safe.
Use Time Machine to back up or restore your Mac
The next thing that I recommend you do is try to repair your hard drive using disk utility. It is possible that an error on the hard disk can cause the error you get. You can use the next section of this article to help with this:
Try disk utility
Follow these steps to use the disk utility app to check or repair a disk.
- If you use OS X Lion or later, start the system recovery or restoration of Internetcomputer. If you are using an older version of Mac OS X your computer is equipped with a Mac OS X installation disc, insert the installation disc and restart the computer while holding the C key instead.
- When your computer has finished starting, choose utility drive in the Utilities window, or in the installation menu if you started from an installation disc.
- Click the first aid tab.
- Click the triangle to the left of the hard drive icon to display the names of your partitions and hard disk volumes.
- Select your boot (typically called "Macintosh HD") drive.
- Click on repair. Disk utility verifies and repairs the disk.
Tip: With Mac OS X 10.6 and earlier, always start your computer from a disk to install or restore when you use disk utility to check or repair your boot volume. Otherwise, you might see some error messages from disk.
Resolve startup issues and perform maintenance on disk with disk utility and fsck
Once you have verified that your hard drive is working normally, try to reinstall the update. If you still run an error, respond and let us know for what part of the installation, you see this error.
See you soon!
-
Impossible to pass Win7.1 to Win10
I installed Win 7 Home Premium on a MacBook Air (13-inch Mid 2012... full specs below) and updated to Service Pack (SP) 1.
Created bootcamp partition 48GB for Windows and Windows Explorer reports that there is about 20.9 GB of free space on the startup disk.
Update Windows 10 specifications say that 20BG of free space is needed (for the 64-bit version). When I run the Win10 Update Setup, it says that my Mac meets the requirements... but when I click on download, I got error 0 x 80070070 which means that there is not enough free space for the installation.
What's wrong? Why the installer says I don't have enough free space? Specifically, how can I get the upgrade installed Win10; How much free space Windows Explorer should say I so that the installation program to run?
Bootcamp doesn't let me do the Windows partition much more given the files that I currently have on my SSD. Before you do all sorts of reconfiguration to make the space more, let me ask: someone at - he got Win7 for upgrade to Win10 on Bootcamp?
Thanks for your help.
-nello
Hey Nello Lucchesi,.
Thanks for checking out the communities of Apple. It seems that you try to upgrade Windows 7 to 10 of Windows using boot camp. To answer your question, Yes, many people have improved Windows 7 to 10 Windows using boot camp. You can find other threads posted here on this, or other matters related to the upgrade. You are correct that error 0 x 80070070 is specific to that need more space.
Bootcamp documentation specifies "at least 10 GB". You make the Windows 10 documentation calls for 20 GB. It always seems that your 20.9 GB is not enough space, and the only recommendation I can offer is to follow the Microsoft article to give your car a little more space.
Check out these links:
Update for 64 bit versions of Windows
Windows Update error code 0 x 80070070 that leads to this third link:
Tips to free up disk space on your PC.
Hope these help you have finished updating your version of Windows.
See you soon.
-
Portege R700 - impossible to pass to Windows 10
I have a Portege r700 with original Windows 7 OEM installation.
Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.
The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.
After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.
I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).
I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.
Any idea?
I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
concerning
/ Anders -
Impossible to pass all the apps that require a connection
I had this problem since the summer power on and off: as soon I to connect to update an application, the app store fails. My connection is fine and the update process starts, but closes unexpectedly after about 30 seconds telling me that I have to go to the "items purchased" (note to Apple the German translation is bad). Of course, even when I switch to the pane of purchases the problem persists. The same problem exists when trying to install all new elements it, even for free.
Initially, I had this problem with XCode 7. I spent over an hour with telephone support from Apple to try to correct this there included removing and running traces. They let fall the ball for several weeks and when I get back in touch they had no solutlon. At some point in October, the seeming problem to resolve itself but reappeared since then and currently preventing me from updating to OS X 10.11.
I enabled debug for the app store and tried the different options all to nothing does not. I don't see anything special except for "storedownloadd (488) deny/dev read-data file.
Has anyone experienced something similar and managed to fix it?
Please read this message before doing anything.
This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.
Step 1
The goal of this step is to determine if the problem is localized to your user account.
Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.
While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.
Test while signed in as a guest. Same problem?
After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.
* Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.
Step 2
The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.
Please take this step regardless of the results of step 1.
Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.
Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.
The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.
Test in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.
-
Impossible to pass the BIOS back to 2.28 (Aspire E1 - 731)
Hi, I have flashed accidentally BIOS version 1.17 on my Aspire E1 - 731 running win 8.1). Now it won't boot from the HARD drive. I am able to boot with win 8 from a USB (Win to Go) and tried to flshh back to version 2.28 BIOS but the program does not Flash it. I said that I must uograde to a similar version (1.x).
Currently, he does not drive HARD and when I boot with the USB with Win 8, WIFI doesn't work.
Is there a way I can Flash the BIOS to 2.28 so my computer working again?
Thanks, I finally solved the problem by using the procedure described here: http://catchtito.blogspot.com/2013/05/how-to-update-to-2x-bios-from-1x-bios.html
Works perfectly and my computer is now running.
-
Impossible to pass A500 to ICS
In settings / about Tablet, there is no option for the upgrade, from the game store, I downloaded the ICONIA TAB update improvement, downloads fine, but during the installation it gives an error message - 'Incompatible with other applications using the same shared user code.'
I downloaded directly at Acer and it just says: not installed application.
Any ideas?
Thank you.
Well Acer come back to me (which was nice), but it the solution was to do a hard re boot, which was done, but to no avail.
So I decided to address this issue myself and it ends up being quite easy!
First step was to entrench the table... and a different version of the 3.2 on the tablet.
I then downloaded the update app Acer Iconnica from the game store, this time it installed, re starts, went into settings - about - check updates and BINGO an update was available, downloaded that and now we have Ice Cream Sandwich installed from Acer.
Simple (in the end)
Thanks for the replies guys!
[edited to conform to the guidelines]
-
Impossible to pass to ICS 4.0
Hello
I'm in France, with the new operator phone Free Mobile.
I noticed recently that PC Companion said Android Ice Cream Sandwich is available, but when I try to upgrade, it gives me the following error message: "Setup error: Impossible to install or start the phone software update components.»
I have never fiddled with the phone software.
Hope you can help. Thank you.
POU (Sony Update Service)... Download and install it on the pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
or
http://www.sonymobile.com/global-en/tools/update-service/
The two links are same
________________________________________________________________
-
Impossible to pass primary and secondary monitors
After the upgrade of thinkvantage Productivity Center I can either spend my main monitor. My secondary monitor works, but only in mode "Extend my Windows desktop on this monitor.". If I try to click on the button "Use this device as the monitor main." on the top control panel a few whites on the monitor and switches to my main monitor again.
At the same time, I lost the ability to use the Fn + f7. Pushing this combination has no effect. If I pass the centre of productivity and choose Configuration from the device / select display settings nothing happens. It seems that upgrading the productivity Center has beaten some program is in charge of the evolution of the monitors.
Any help would be appreciated.
Hi and welcome to the forum!
What ThinkPad and the operating system are you using?
Presentation Director is responsible for the combination Fn + F7, put it back, I suggest:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67364
Special attention to the instructions: -.
Installation instructions Notes:
- Before installing the Director of the presentation, he must install a display driver appropriate for the target system and the "Lenovo System Interface driver". Refer to the README file of each software package for the installation of such software.
- Or Lenovo System Interface driver for portable computers ThinkPad-no
For portable computers ThinkPad Lenovo System Interface driver
It is necessary to install "Lenovo System Interface Driver" for using Windows Vista. - Display driver
It is necessary to install a display driver appropriate for the target system that is provided by Lenovo. Director of presentation does not work with any display of Inbox driver in the OS.
- Or Lenovo System Interface driver for portable computers ThinkPad-no
- Activate the Fn + F7 key on the screen, to also install the following packages:
- Power management driver for Windows Vista, XP, 2000, Me, 98 SE.
- Hotkey driver for non-ThinkPad notebooks or
For ThinkPad Hotkey features integration
(Note) If Hotkey features version 2.20 or later is installed on your system, install Presentation Director 4.04 or later version.
- Before installing the Director of the presentation, he must install a display driver appropriate for the target system and the "Lenovo System Interface driver". Refer to the README file of each software package for the installation of such software.
-
Impossible to pass to Windows 10
I am trying to upgrade my laptop Windows 7 Professional to windows 10. I tried to do the upgrade based on the web, but it is suspended on the verification of the process of updates.
Have also tried to download the iso and media creation tool, I get a message saying that I have to close the tool and restart the computer, what I've done.
Nobody knows what is happening there?
Flashman
Run the Windows Update troubleshooting tool:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-TroubleshooterAlso:
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
Maybe you are looking for
-
HI, my iPad 2 is running IOS 9.3.5 memory I'm curious to see if the IOS 10 will run on it. Tom Miller
-
What happened to 'bookmark this page' selection in the menu "Show bookmarks" on the right?
Now, I have to:1) click the Blue Star stupid to get the menu to place my new bookmark where I choose to do instead of going to unsorted bookmarks again...OR(2) raise or having the menu bar and click on the menu choice "Bookmarks" to "bookmark this pa
-
This message p [ops upward when I run iTunes] Money cannot connect to the store purchases. If you have any firewall software, make sure it has been set to allow communication on port 443. How can I fix it?
-
My connection between my PC and the Internet.
MY CONNECTION BETWEEN MY PC AND THE INTERNET. I sent a message yesterday - don't know if I got a response. My question is that something is wrong with my internet connection. He died in line every 4-10 minutes of use. I bought a new computer becaus
-
Download the hp Recovery Manager software
How to download the software of hp Recovery Manager (windows 7) for HP Pavilion dv6-6c55se notebook PC?