Help in the correction of errors

Similar Questions

• Help determine the correct UPS for my office

  I have a hp media center pc m8120n and I want to get a UPS size correctly for this. Operating system is Windows Vista Home Premium (32 bit), memory is / 3GB. It has a DVD/CD burner and two 300 hard disks of BG. The display is a H - P w2207, 22 "LCD.

  FYI, the screen shoots 65 watts, the computer has a 300 Watt power supply, and the label at the back of the Cabinet says 8 amps. So the question is, how do you determine the correct (I would like to be able to operate on battery power for at least 10 minutes) the capability of the inverter.

  I suggest a 750va for your application unit. You can also run the APC UPS Selector and see what he suggests.

  Frank

• help choose the correct color settings

  Hello everyone, its been a long time that I installed Photoshop and do not remember the appropriate parameters for the work in Photoshop CS6.  I had a problem with my computer and had to reinstall and now my mind is a blank. I tried browsing here and on the net and came up with a large number of ions of conflict.  I know I have to use Adobe 1998, but alternatives escape me. I do know that if I should change the gray space, I was told to use gray gamma 2.2. I don't know if I should Desaturate monitor 20% etc.

  What conversion options? What should those be?  And what about the advanced controls and what must be those defined for better photographic needs.

  I hope that's not too redundant, if it has already please send me to her.

  Judging by your screenshot I guess you run Photoshop on a PC and I hesitate to make any recommendation beyond the ones I listed. I think that. other than the installer, I suggested, all of the default settings are a safe bet.

  If my answer your request solved the problem, you can mark the correct answer. Thank you.         normftb

• Need your help with the following 3 error messages that now appear on my PDF document.

  Hi all

  I worked on a PDF document to the University for the past 4 months. Its a PDF which I was informed as I go along and recording with no problems.

  Today however I try to open it to work and that's what I get now...

  "This document enabled features extended in Adobe Reader." The document has been changed since its creation and use of the extended functionality is no longer available. For the original version of this document, contact the author'

  "There is an error on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem.

  «The font 'GTAJBY + Bliss-Regular' contains a bad /BBbox.»

  It has never done this before, and even when I tried to open my backup file it did the same.

  Can someone help me please? I have so much work that is potentially lost on this...

  (Also, I'm not a large part of the head of the computer, so please keep in simple terms)

  Thanks in advance everyone...

  Great thanks for your help...

  Some "experts".

• Validation of Windows 7 with the correct code error

  I had to recover my OS which was at the origin of Vista and is what amounts to the recovery step, I have a Windows 7 Upgrade disk then I ran that who has updated the OS for the system W7, I received the message of 274 updates and I'm not very savi to what I put to load all the and now I get W10 which I don't want and it is also a box telling me my Windows code is wrong? When I entered the code FROM THE DISC PACKAGE it still says it is wrong what do I continue with my laptop.

  I also want to use a different web browser "BlackHawk", but it does not load? Chrome or IE which are just full or errors

  Try again by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  also

  How to disable enforcement GWX Get Windows 10 updated completely

• HP 4320 s replace HDD--> DDD, help with the correct choice please

  Hi all

  I want to replace my 250 GB HARD drive on some of the SDS, what type of disc that I'm looking for? What will be the best sollution for 120 and 250 GB have? I really don't know anything about the types of connectors and other "serial sata" that means anyone can get listed something? I read that there are series of SDS 330 from Intel that match? Looking for connectors SATA 3 or 6 GB?

  Thanks for understanding noob

  Here is the Service Manual:

  Manual

  See Page 73. The hard drive in this one is a little harder to get to than your average laptop, so be careful.

  It's a standard thickness of 2.5 inches wide of 9.5 mm SATA. You can use any 2.5 inch wide 9.5 or 7 mm thick SSD. I recommend the Samsung 840 Evo:

  Here's the 120 gig for about $85 and there are links to all available sizes.

  http://www.Newegg.com/product/product.aspx?item=9SIA29P1EC5421&cm_re=samsung_840_evo_ssd-_-20-147-247-_-product

  Your interface is SATA 2 3gbps, but don't sweat it... 6Gbps SATA-3 discs downclock of will and work very well. There is very little difference in the real world real performance betweeen the two interfaces. Buy, install and enjoy. If you need assistance with the resettlement/migration software we can help there, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Help on the ORA-12560 error: error adapter TNS:protocol

  Hi people,

  I know that the same question has been asked a million times, but none of them match mine. So please help.

  Platform: Windows Server 2008 R2 64 bit

  Database: Oracle 11.2 64 bit

  I have the Client and the server.

  The server is on D:\app\Administrator

  The customer will find on E:\app\Administrator

  The name of the server is HOMER2922 - DC1.homer2922.local

  It seems that there is no problem to tnsping Server

  C:\users\administrator. HOMER2922-DC1 > tnsping homer2922 - dc1.homer2922.local

  AMT Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on August 8, 2013 21:40:50

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  E:\app\Administrator\product\11.2.0\client_1\network\admin\sqlnet.ora

  EZCONNECT adapter used to resolve the alias

  Try to contact (DESCRIPTION = (CONNECT_DATA = (SERVICE_NAME =)) (ADDRESS = (PROTOCOL = TCP) (HOST = fe80::4db:1a2a:3f57:ff57%13)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.168)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=2001:0:9d38:953c:4db:1a2a:3f57:ff57)(PORT=1521)))

  OK (10 ms):

  Here is my tnsname.ora:

  Homer =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = HOMER2922 - DC1.homer2922.local)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = Homer)

  )

  )

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  The listener.ora:

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\Administrator\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = HOMER2922 - DC1.homer2922.local)(PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = D:\app\Administrator

  I couldn't understand what was wrong.

  Appreciated for any help.

  IBM

  Holy Cow. "Thank you so much sb92075 , your word 'so I don't know why you have additional client ORACLE_HOME. "helps me to solve the problem.

  I have the Client and the server to be installed on the same server. Additional customer ORACLE_HOME actually the cause of the problem. After uninstalling the client, everything works fine now.

• Please help with the correct color settings

  I use ID CC depending on which we, my printers want my final PDF either as PDF/x-1a (I know it does with regard to Flattening) or PDF/x-4.

  I need all color images for close to CMYK, no matter what they were when placed. I need all 100 %K black to stay like this and not to convert an intense black.

  Currently, my document color settings are:

  Parameters: general use of 2 North America

  Workspaces:

  RGB: sRGB IE61966 - 2.1

  CMYK U.S. Web Coated (SWOP) v2

  Color management policies:

  RGB: Preserve embedded profiles

  CMYK: Preserve numbers (ignore linked profiles)

  Conversion options:

  Engine: Adobe (ACE)

  Intent: Relative Colorimetry

  I use the default settings for PDF/x-1's or PDF/x-4 (most have the ink Manager to convert all tasks to deal with) and and always receive a yellow warning with the following in general warning triangle:

  The preset specifies source profiles that do not match the current color settings file. Profiles specified by the color settings file will be used.

  What should I check in my document color settings to avoid this error message (the resulting files do appear to be OK for what I need, I want to just make sure that I put it just in case this error). Of course, other thoughts are always appreciated also.

  What should my document color settings also if the final document will be black and white (in grayscale) and contains only data on the black plate?

  Sorry to contradict the Peter a bit here, but X - 4 allows to RGB, rather than to specify it, so you can have your PDF by setting 'Convert to Destination (preserve numbers)' with an appropriate destination CMYK profile and still conform to the standard X-4.

  That's what I'm doing here, because I prefer the Adobe CMM performs the conversion.

• Help understand the workspace configuration error

  Hello
  
  I get the following error when trying to set up a new workspace (Apex 3.2.1/10g) using an existing schema:
  
  ORA-20001: error ORA-24344 30: success with compilation error
  APX8668250WS commissioning error.
  
  The workspace was not created. Nothing useful that I could find in the alerts log or logs of Apache. Not sure where else to look... all APEX objects in the database appear to be valid. Any thoughts?
  
  Lori

  Check the view of dba_errors for pl/sql errors.

  Select * from dba_errors;

  CITY

• Need help of the correct SAS 2.5 upgrade option "HDD for PowerEdge T620

  I want to add the disk to an existing Dell PowerEdge T620 (service tag GTPKDV1) storage. The vehicle currently has 7 300 GB SAS 2.5 "hot, two virtual drives (300 GB RAID1) and RAID5 1116 GB replaceable drives. There are 16 bays.

  Browsing the Dell store for server upgrade parts I am surprised not to see that two form factors for of 2.5 "10K rpm SAS drives. only 300 or 900 GB. Nothing to do with higher speeds or more capacity! And I'm not even sure, one of the search results is really 2.5 "because the Web site product description does not indicate the size at all.

  300 GB of the manufacturer: 15NM6 | Dell reference: 342-2016 (accessories.dell.com/.../productdetail.aspx

  900 GB of the manufacturer: TPMWF | Dell reference: 342-4143 (http://accessories.dell.com/sna/products/Hard_Drives_Storage/productdetail.aspx?c=ca&l=en&s=bsd&cs=cabsdt1&sku=342-4143&mfgpid=225343)

  The 900 GB is described as a hybrid drive. What is a drive hybrid? Isn't SAS, SAS?

  There are several results that seem to be variations on the 300 GB 10 K 2.5 "disk SAS6. They are all the same product? Why the different reference numbers?

  The H710p wouldn't even try to use the 300 to rebuild the 1.8 TB drive failure, as the reader will not be perceived as a Hot Spare for this virtual disk. A 300 GB global Hot Spare would be able to rebuild any 300 GB or more small disc. If the Global Hot Spare is a 1.8 to it should rebuild one of these virtual drives.

• In the Correct XML error event format

  
  wich error event ican use xml format incorrect. As

  --------- XML------

  < data >

  < name > some name < / name >

  < name > some name2

  < / data >

  -end of XML-

  above wich case error ican use

  There is no event for what I think, but you can use try... :

  var urll:URLLoader = new URLLoader();
  urll.addEventListener (Event.COMPLETE, f1);

  function f1(evt:Event)
  {
  Try
  {
  var xmlm:XML = XML (urll.data);
  }
  catch (e:TypeError)
  {
  trace ("XML not well formed");
  }
  }

  urll. Load (new URLRequest ("isim.txt"));

• Need help with the ANSI Join syntax

  Version: 11.1.0.7
  
  I have my select statement that returns 3000 lines and looks like
  

  select ..
  from tab1 a,tab2 b,tab3 c
  where a.c1=b.c1 and
  b.c2 = c.c2(+)
  and ...
  group by
  ..

  I want to convert it to ANSI SQL, because it must be able to Hibernate, and the developer says that Hibernate include only ANSI SQL. I tried something like
  

  select ..
  from tab1 a INNER JOIN tab2 b
  ON a.c1=b.c1 
  LEFT OUTER JOIN tab3 c
  ON b.c2=c.c2
  where ...
  group by
  ..

  I felt bad and it turned out to be the same. It returns no rows. Please help with the correct syntax.

  I'm not sure, sorry, because it's certainly the ANSI equivalent to the non-ANSI.

  Would you have examples of queries and data that you can reproduce the problem with, and that we could analyze?

  Published by: Seanmacgc on July 15, 2009 12:48

  If there is no Clause WHERE conditions in the original that are included in the ANSI version of the query in the WHERE Clause for the EXTERNAL table itself joined, then that could transform the JOIN JOIN internally, that is, all the filters on the EXTERNAL joined table should be included in the JOIN predicate - IT (b.c2 = c.2 AND c.c3 = 'X').

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• Helps to solve the blue screen error 0 x 24

  Original title: the blue screen of death

  My widows Xp got the blue screen of death, ofthe ERROR (0 x 00000024) he tells me that I need to run CHKDSK. I don't know how to make it work and I can not start safe mode because it brings back me to the blue screen.

  I don't have the disk, but I have a Cd to burn files on.
  PS. You can go into details as I am new on this computer setting
  Thanks Chris O Rourke

  Because a lot of people doesn't seem to have an XP Installation CD, I have these instructions on how to create a CD of bootable XP Recovery Console and run chkdsk (no XP media required) program.

  If the forums MS Answers would invite for a little information system, when a new question is asked, you would be probably done now...  I take for granted that you have an internal or external CD/DVD drive that is functional.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx