Help. Isn´t 3D working in CS6 after update. Open GL

Similar Questions

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Windows 7 Media Player not working not not after update

  I recently installed updates on my PC. I am currently running microsoft 7. Now my Media Player will not work. Nor I can play YouTube videos on the web. Videos on the web come in white & if I try to open windows media player I get the following error:
  Setup_wm.exe - Application error
  The application was unable to start correctly (0xc0000005). Click OK to close the application.

  Please help me solve this problem. It worked fine before the update.
  Thank you.

  Hi Kallaher'sFamily,.

  ·         You use Internet Explorer? If so, what version of IE are you using?

  ·         The updates have been installed?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: Uninstall and reinstall Windows Media Player from Windows features turn on or off. Follow these steps:

  (a) click Start, type the turn Windows features on or off in the start search box and press ENTER.

  (b) uncheck the features of media.

  (c) restart the computer and follow the same steps to reinstall windows media player.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  For reference:

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294 (if you use Internet Explorer)

• Optical Mouse 2.0 not working in win8 after update

  I have a Microsoft Wireless Optical Mouse 2.0, I was so happy in Windows 8, after I found the mouse in my attic and I decided to call it my Gaming Mouse, but the last time that I've updated Windows 8 when I try to connect it says it dosent it rechonize what I could do?
  I tried updating the driver but I don't think that I did it correctly

  Help?

  Hello Gilberto,

  Welcome to the Microsoft Community forums. According to the description of your problem, I understand that the wireless optical mouse does not work after Windows Update.

  (1) did you check the mouse on another computer?

  (2) the updates have been installed lately?

  (3) how the OP tried to update the driver?

  Follow the method for troubleshooting steps.

  Method 1:

  I suggest you uninstall and reinstall the mouse driver prior to this driver update and check.

  Follow the steps to update the driver.

  (a) press Windows + X.

  (b) click on Device Manager.

  c Expand wireless mouse).

  (d) right click on the mouse. Click on set to update driver.

  After updating the driver, restart the computer and check.

  If the issue still persists, uninstall and reinstall the driver.

  Follow the steps to uninstall the mouse driver.

  (a) press Windows + X.

  (b) click on Device Manager.

  c Expand wireless mouse).

  (d) right click on the mouse. Click on uninstall the driver.

  Method 2:

  I suggest you update the driver.

  Refer to update the driver.

  Material:

  http://www.Microsoft.com/hardware/en-us/downloads

  Method 3:

  I suggest you to run the hardware troubleshooter.

  Follow the steps to run the hardware troubleshooter.

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Hardware Troubleshooter in the option Search .

  d. click convenience hardware store to run the troubleshooter.

  If the problem still persists please answer we will be happy to help you.

  Thank you.

• How to return to CS6 after update of cloud?

  Comment back to my paid version CS6 after an update that offer me cloud of the evaluation version of the pendant 30 days?

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• Cross-dissolution/fade-in works DO NOT after update 2015.1.

  After downloading the latest update, 2015.1, I can place is no longer just a fade at the beginning of a clip in my calendar. Rendering BOTH CUDA and open CL settings, I can not just hit (cmd + d) at the beginning of a clip to normally add a fade in. It's something I do often and thus prevented from having this option are extremely frustrating. The feature works however when I select a renderer 'software only '.

  Also, I was hoping with this last update that Adobe would have set troubling blue lines that appear during hover and playback while scrubbing on the rendering engine "Open CL.  Are there known solutions to this?

  I have a related to an entry of the crossfade screen does not. Any input would be greatly appreciated!

  Cross of dissolution does not work in the first update on Vimeo 2015.1

  Hi Matt,

  We have reproduced this issue and the respective team was informed. Sorry for this BUG can be reproduced on 10.11.2 so but only with 9.1 update Premiere Pro.

  Now you can use the software only mode or OpenCl in the project settings > Renderer. Also, you can restore the version 9.0.2 update.

  Vinay

• External microphone does not work do not after update

  Computer does not recognize my external microphone after an update.  How can we solve this problem?

  The computer recognizes the headset but not my external microphone.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Need help to solve problems on iPad Air2 after updating iOS 10

  Hey guys this is my second post in the forums of the iPad on the same issues - have not been able to sort them yet Dazs.

  (1) my iPad can't Touch ID even after the restoration of the aircraft there was "failure to put in place Touch ID error" and whenever I turn on the Tablet I get a notification that says: «cannot activate Touch ID on iPad»

  When I go to settings to set a new mark I simply get an NDR regardless of switching Touch ID access power (iTunes/App store + phone unlock) as support interviews suggest.

  2) there is a general delay in the camera, the on/standby button does not respond as it used to, and especially when I turn on the iPad must be 2min30secs to get switched on - I timed it actually! Before the update simply took 15 seconds, my old laptop powers on more quickly than my iPad now!

  I restored my iPad, and while all the other functions work with delay however, but these two big things are bugs me a lot. They are not resolved after the restore the device.

  How to solve these problems please help!

  Here is the error I get when I try to configure the contact ID.

  

  This is the error that I get whenever I turn on the unit.

  

  And iPad takes so long in power! Record the time more myself!

  

• Hyperlinks not working not not after updating iOS 9.3

  help, unable to use the Internet after iOS 9.3 update on my iPhone 6 s - how to rectify this? iPhone is currently useless!

  Apple is well aware of the problem and after calling Apple support myself an hour ago they said they are working on a fix to be available shortly.

• Bluetooth doesn't work at all after update of windows 8 to 8.1

  I have HP Pavilion g6-2206tx Notebook PC, which was running windows 8 (64-bit).

  recently, I've updated to windows 8.1. all things are very well after the i.e. update, all the hardware and software work properly wait bluetooth. Bluetooth does not work & I tried all means to run it.

  It seems that there is no bluetooth on my laptop hardware.

  I contacted hp too & they gave me 1 update and also, it will not work.

  Plesae help me that I am very sad.

  my computer laptop product number - C0P19PA

  The only other suggestion I can offer is to try that one directly from Mediatek...

  Bluetooth Driver (RT3290/MT7630)

  25/06/2014

  V11.0.754.0

  Win7 Win8 Win8.1

• BlackBerry classic HELP! BB q20 rear camera fault after update.

  Hello!

  The problem is that the main camera on my classic q20 cannot start after the ota update.

  When I try to open the camera there is a black screen for a while, then a message appears "flashlight mode error has occurred" (translated from rus) - after this error message the screen is always black, for now I can go to the front camera and trying to make a flashlifght of selfie flashes like I'm doin just one image - selfie becomes black. Torch works very well when using through quick settings.

  Tryied an automatic charger... nothing (())

  Please HELP there are no servises BB official in Ukraine, so I'm just PvP with this evil.

  Thank you for your response. I solved this by checking all connections of cables, so I guess, the problem is solved itself while the battery is disconnected.
  Thank you for being interested in solving my problem!

• App update work does not after updating IOS 10

  Hi guys,.

  After the update my 6plus iphone to IOS 10 yesterday, I have a problem with the update of the applications on the Itunes store. Updates are not downloaded. IPhones shows it starts the download but nothing happens.

  Tried via 4G and Wifi but no difference.

  Help much appreciated.

  Thank you

  TBirdGarage

  Restart your iPhone, and then try again.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Add-ons - works does not after update

  Since the update to Firefox 42, I had to refresh it and among a long list of other problems my modules do not work. When I click on tools > Modules I get the error message "cannot find server".

  How to solve this?
  Thank you.

  • 1 Download Firefox for all languages and systems v42 {web link}
  • 2 Uninstall Firefox on your computer {web link}
    DO NOT REMOVE your profiles.
  • 3 after that, restart the computer. Then, run the full installer.

• USB not working not not after update OSx 10.11.4 - VMWare Fusion 7.

  Hello

  I use OS x with VMWare Fusion 7. After the upgrade to OSx 10.11.4, my VMWare Fusion 7 does not support USB.

  I opened the VMWare Fusion. "When I joined the external hard drive, VMWare asked me where to connect ' Mac or Windows. What I chose, it does not work.

  Thanks in advance,

  Khine

  Try to upgrade to OS X 10.11.5

• IOS9.3 no hyperlink does work in Safari after updating

  Someone knows how to fix this?

  What I should expect that forthcoming Apple with a new update?

  Thx for the reactions of the year

  It is a known issue and Apple is working on a fix. These articles summarize some of the issues with the current version. To disable Javascript in Safari, but this sacrifice functionality with the web browser. Download another browser has helped others (not the Chrome as it has the same).

  blem http://www.Forbes.com/sites/gordonkelly/2016/03/28/Apple-iOS-9-3-Safari-link-Pro / #5cdeb757797f

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/